Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 02-06-2015, 06:50 PM   #1
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
ADM ZL1 E85 TEST

This is 2 years old....But very informative

ADM Performance has teamed up with Andy at Squash Performance to fuel its New Shop 2013 ZL-1
For both current mods and possibly the highest horsepower ZL-1 Ever.

The recipe for fuel consist of Squash twin 400LPH fuel pump module ,Weldon boost referenced regulator,KenneBell 20v Dual Boosta-pump,Injector Dynamics ID 850 Injectors(For now),A lot of wiring!


Here is the car -






ADM PERFORMANCE is offline   Reply With Quote
Old 02-06-2015, 06:52 PM   #2
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
Here is the pre dyno

484 rwhp and 465 rwtq
Here is prior to mods starting dyno- 80 miles on car



ADM PERFORMANCE is offline   Reply With Quote
Old 02-06-2015, 06:54 PM   #3
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
Coming apart







ADM PERFORMANCE is offline   Reply With Quote
Old 02-06-2015, 06:55 PM   #4
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
Out with the old and in with new





ADM PERFORMANCE is offline   Reply With Quote
Old 02-06-2015, 06:56 PM   #5
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
Old powering system and New

Old power system versus new



ADM PERFORMANCE is offline   Reply With Quote
Old 02-06-2015, 06:57 PM   #6
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
Here is the parts list and car

2013 Shop TEST E85
New ZL1 combo:
Dual 400 lph system
Kennebell Dual boostapump
Weldon regulator
Injector dynamics ID-850
Ported blower inlet
Ls3 throttle body
ADM Street Intake system
2.38 pulley
14-15 psi(should be with no cam and exhaust mods)
ADM Heat Exchanger

Stock exhaust
Stock cats
Stock cam
Stock converter
Stock lower pulley/balancer
Stock 6l-90E Automatic transmission






ADM PERFORMANCE is offline   Reply With Quote
Old 02-06-2015, 07:00 PM   #7
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
The results

So after I spent a bit of time seeing how much timing you can get into a ZL1 ON E-85 as compared to a ZL1 ON 93 Octane I have come to realize that E-85 WORKS GREAT FOR THESE 1.9 LITER BLOWER CARS!

With the 2.38 pulley and the LSA Blower spinning 21,300 rpm at 6500 the boost with stock 4 catalytic converters,stock 2.5" exhaust,stock cam,ADM Ported Blower Snout,LS3 Throttlebody,ADM Street Intake makes an averge of 14.7 psi boost.

Peak Torque is at 14.93 psi at 3800 rpm 633 RWTQ
Peak Power is at 14.72 psi at 5900 rpm 624 RWHP
Timing at Peak torque is 19
Timing at Peak Power is 27

Here ya go:

Torque compared to stock:














GT-500 at same boost :

ADM PERFORMANCE is offline   Reply With Quote
Old 10-21-2015, 10:32 AM   #8
mlee
Moderator
 
mlee's Avatar
 
Drives: 2019 Crush ZLE
Join Date: Oct 2008
Location: Conroe, TX
Posts: 35,120
Just found this... may be my next mod.
__________________
mlee is offline   Reply With Quote
Old 10-21-2015, 11:04 AM   #9
Scuzz
 
Scuzz's Avatar
 
Drives: 2012 Camaro SS
Join Date: Aug 2013
Location: Mckinney, TX
Posts: 339
Quote:
Originally Posted by mlee View Post
Just found this... may be my next mod.
Getting my e85 done as we speak

No brainier once they opened up a e85 gas station 5 min from house
__________________
2012 Camaro SS Automatic
AGP Twin Turbo LSX427 / ADM Magic / 4L80
“1318 Rwhp 21.70 lbs of boost”
On 22.9lbs so ~1345ish?
Scuzz is offline   Reply With Quote
Old 10-22-2015, 08:33 AM   #10
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
Quote:
Originally Posted by mlee View Post
Just found this... may be my next mod.

Old news mike,Old news!
ADM PERFORMANCE is offline   Reply With Quote
Old 10-22-2015, 08:57 AM   #11
mlee
Moderator
 
mlee's Avatar
 
Drives: 2019 Crush ZLE
Join Date: Oct 2008
Location: Conroe, TX
Posts: 35,120
Quote:
Originally Posted by ADM PERFORMANCE View Post
Old news mike,Old news!
LOL... that's why I just call you
__________________
mlee is offline   Reply With Quote
Old 10-22-2015, 11:10 AM   #12
Jeff_SS
"Cam Only"
 
Jeff_SS's Avatar
 
Drives: 2013 Camaro SS
Join Date: Nov 2011
Location: Thousand Oaks, CA
Posts: 1,659
I plan on going E85.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake | Pfadt Suspension | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno)

Jeff_SS is offline   Reply With Quote
Old 10-22-2015, 01:58 PM   #13
ADM PERFORMANCE
 
Drives: Anything I want
Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,382
Quote:
Originally Posted by mlee View Post
LOL... that's why I just call you
ADM PERFORMANCE is offline   Reply With Quote
Old 10-22-2015, 02:13 PM   #14
ZYBORG
Lets roll...
 
ZYBORG's Avatar
 
Drives: 14'
Join Date: Jun 2014
Location: TX/S.FL
Posts: 1,496
Andy, did you ever cecked out the PM and/or email I sent you about a month ago?
__________________
ZYBORG is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:56 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.