05-28-2009, 11:39 PM | #1 |
SS badge to replace bowtie on grille and tail -anyone making them?
direct replacments would work for me.... take off bowties and put the SS ones on...
|
|
05-29-2009, 12:01 AM | #2 |
Dances With Mustangs
|
There's a couple of places you can get them on the internet:
If you want the old school style from the 69 Camaro: https://www.americanrestorationparts...M-P1029C0.aspx If you want current style: http://visionmotorworks.com/chssemsip.html The current style are stick-on which would work on the back but the front might be tough.
__________________
Blue Angel is here!! 1SS/RS LS3 M6 IBM |
05-29-2009, 12:20 AM | #3 | |
Drives: 2010 Camaro 2SS VIN#11184 Join Date: May 2009
Location: Irvine, California
Posts: 580
|
Quote:
Will those fit the 2010? |
|
05-29-2009, 01:07 AM | #4 |
Dances With Mustangs
|
Don't know since I don't have my car yet. It's only going to cost about $20 to find out though.
__________________
Blue Angel is here!! 1SS/RS LS3 M6 IBM |
05-29-2009, 07:42 AM | #5 |
|
I would do te SS thing to. But chances are you will have to replace the whole grill. I wouldnt only do a bolt on type thing if i did it.
__________________
2010 1SS/RS Black, CGM stripes, polished Rims, Tinted windows, Hurst shifter
|
05-29-2009, 08:55 AM | #6 |
Oldbie that nobody knows
|
Yeah, when you remove the bowtie it leaves an indention that is shaped in its likeness - kinda hard to fit an SS in that without it looking terrible. They're probably going to reproduce a stock-like grille but with the SS logo in the center. Hopefully it'll be the new style SS since that will feel a little more appropriate. They're apparently making one right now at the Tom Henry thread.
|
05-29-2009, 10:24 AM | #7 |
|
well if anybody sees one pm me. I would like one of those I would want red because I have the RS package on the SS. I probably would do the grill thing and not touch the back as that bowtie leaves holes. But didnt the ole camaro have the SS in front and bowtie in back
__________________
2010 1SS/RS Black, CGM stripes, polished Rims, Tinted windows, Hurst shifter
|
05-29-2009, 10:42 AM | #8 | |
Yep I'm back!
Drives: 2017 Krypton Green 1SS 1LE Join Date: Mar 2009
Location: Indian Trail, NC
Posts: 2,565
|
Quote:
|
|
06-03-2009, 11:39 PM | #9 |
Drives: #5 Tom Henry Racing 2010 2SS/RS Join Date: May 2009
Location: North Coast
Posts: 370
|
|
06-06-2009, 03:45 AM | #10 |
been looking around.... still no luck.... hope someone makes them.... also one to cover the two holes after you remove the rear tail bowtie....
once i get my car i think I'll have to draw a set out and get it made by a machine shop (billet) then i can remove the mini ones (stock SS ones) i like the old school ones ('69) but i think a will match the mini ones (on car)... then they will match all the rest |
|
06-07-2009, 12:43 PM | #11 |
Drives: 2010 Camaro 2SS VIN#11184 Join Date: May 2009
Location: Irvine, California
Posts: 580
|
Defenderworx is making them. www.defenderworx.com
|
06-07-2009, 01:04 PM | #12 |
"That Guy"
Drives: Camaro SS...........what else? Join Date: Apr 2009
Location: OOOOOOOklahoma where the wind comes sweepin' down the plains.
Posts: 2,360
|
can't wait to see 'em.
__________________
|
06-08-2009, 12:24 AM | #13 |
I haz camaro again :)
Drives: 2010 Chevrolet Camaro 1SS Join Date: Mar 2009
Location: Union, South Carolina
Posts: 660
|
my grandpa thought about buying a v6 grill and painting the bowtie flatblack to match the grill and throwing one of them stickers on my car when i get it, but i'd much rather do a grill swap where the ss is already in the middle.
|
06-16-2009, 08:07 PM | #14 |
any pictures of SS grilles?
|
|
|
|
|
|