Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Members Classifieds - Parts for sale or wanted > V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment


Reply
 
Thread Tools
Old 10-04-2023, 02:52 PM   #43
The_bald_eagle_machine
Anthony S
 
The_bald_eagle_machine's Avatar
 
Drives: 2011 chevrolet camaro 2ss/rs
Join Date: Apr 2021
Location: Chiefland, FL
Posts: 942
I am reaching out to a few local fabrication shops and seeing if i can strike a deal to get these made, and powder coated. I will let you guys know what I come up with. Currently quoting a batch of 25. It would probably be a one and done type of order. because as my experience with the ground cables... once the 20 people who want them buy them.. Then you end up with a bunch of ornaments on the shelf.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181

Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR font and rear sway bars, Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links.
The_bald_eagle_machine is online now   Reply With Quote
Old 10-04-2023, 07:21 PM   #44
Scooter18155
 
Scooter18155's Avatar
 
Drives: 2010 ss/rs 6 speed manual
Join Date: Aug 2013
Location: Ny
Posts: 584
Quote:
Originally Posted by The_bald_eagle_machine View Post
I am reaching out to a few local fabrication shops and seeing if i can strike a deal to get these made, and powder coated. I will let you guys know what I come up with. Currently quoting a batch of 25. It would probably be a one and done type of order. because as my experience with the ground cables... once the 20 people who want them buy them.. Then you end up with a bunch of ornaments on the shelf.

Here’s someone that already makes them both front and rear. I have thier front one and have no complaints. Made you can contact them and get a deal done for ordering so many from them. I’d be interested in a rear one myself.
https://www.leftcoast32.com/shop-per...point-receiver
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
Scooter18155 is offline   Reply With Quote
Old 10-05-2023, 01:57 AM   #45
truepatriotmjm
 
truepatriotmjm's Avatar
 
Drives: 2015 2SS/RS with Twin Turbskies
Join Date: Dec 2017
Location: Shreveport, LA
Posts: 266
Quote:
Originally Posted by Scooter18155 View Post
Here’s someone that already makes them both front and rear. I have thier front one and have no complaints. Made you can contact them and get a deal done for ordering so many from them. I’d be interested in a rear one myself.
https://www.leftcoast32.com/shop-per...point-receiver
That dude doesn't respond to messages, answer the phone, and everything says Out of Stock so wondering if he is even still in business.
truepatriotmjm is offline   Reply With Quote
Old 10-05-2023, 05:28 AM   #46
SlowLS1

 
SlowLS1's Avatar
 
Drives: 2010 Camaro SS , 2011 Colorado LS1
Join Date: Jan 2022
Location: Greenville, SC
Posts: 938
Quote:
Originally Posted by The_bald_eagle_machine View Post
I am reaching out to a few local fabrication shops and seeing if i can strike a deal to get these made, and powder coated. I will let you guys know what I come up with. Currently quoting a batch of 25. It would probably be a one and done type of order. because as my experience with the ground cables... once the 20 people who want them buy them.. Then you end up with a bunch of ornaments on the shelf.
Thanks for doing this!
__________________
SlowLS1 is offline   Reply With Quote
Old 10-05-2023, 08:09 AM   #47
Scooter18155
 
Scooter18155's Avatar
 
Drives: 2010 ss/rs 6 speed manual
Join Date: Aug 2013
Location: Ny
Posts: 584
Quote:
Originally Posted by truepatriotmjm View Post
That dude doesn't respond to messages, answer the phone, and everything says Out of Stock so wondering if he is even still in business.
Maybe it was a few years ago I dealt with them. They were responsive when I messaged them. They were out of stock when I ordered my front bar and I messaged them and they told me they make them per order. But yeah if you don’t get a response at all maybe your right.
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
Scooter18155 is offline   Reply With Quote
Old 10-05-2023, 08:22 AM   #48
The_bald_eagle_machine
Anthony S
 
The_bald_eagle_machine's Avatar
 
Drives: 2011 chevrolet camaro 2ss/rs
Join Date: Apr 2021
Location: Chiefland, FL
Posts: 942
Quote:
Originally Posted by Scooter18155 View Post
Maybe it was a few years ago I dealt with them. They were responsive when I messaged them. They were out of stock when I ordered my front bar and I messaged them and they told me they make them per order. But yeah if you don’t get a response at all maybe your right.
I reached out to him and we are working on the details to see if it makes sense.

I will keep my local machine shops in mind while I work this. If i had a mandrel pipe bender and a little more skill with the welder I would just make them myself, but I'm not sure that they would be resale quality. My welds are good enough for me, but I am sure others would disagree.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181

Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR font and rear sway bars, Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links.
The_bald_eagle_machine is online now   Reply With Quote
Old 10-05-2023, 01:38 PM   #49
The_bald_eagle_machine
Anthony S
 
The_bald_eagle_machine's Avatar
 
Drives: 2011 chevrolet camaro 2ss/rs
Join Date: Apr 2021
Location: Chiefland, FL
Posts: 942
I've got a solid lead on this project, is everyone in agreement that they want to use the zl1 addons tow hook?

Also, I need to gauge interest on who on this page still wants a crash bar. I have worked out a deal with a vendor RSM and we are going to build a prototype now, and they will ship it to me to test fit on my camaro with the tow hook. I will be purchasing all of the units up front. Will keep you guys updated. But feedback would be appreciated.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181

Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR font and rear sway bars, Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links.
The_bald_eagle_machine is online now   Reply With Quote
Old 10-05-2023, 10:45 PM   #50
olblue75


 
olblue75's Avatar
 
Drives: 2010 2SS/RS
Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
I would be interested if as long as they’re not 400 or 500 a piece.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.
olblue75 is offline   Reply With Quote
Old 10-06-2023, 05:58 AM   #51
SlowLS1

 
SlowLS1's Avatar
 
Drives: 2010 Camaro SS , 2011 Colorado LS1
Join Date: Jan 2022
Location: Greenville, SC
Posts: 938
Quote:
Originally Posted by The_bald_eagle_machine View Post
I've got a solid lead on this project, is everyone in agreement that they want to use the zl1 addons tow hook?

Also, I need to gauge interest on who on this page still wants a crash bar. I have worked out a deal with a vendor RSM and we are going to build a prototype now, and they will ship it to me to test fit on my camaro with the tow hook. I will be purchasing all of the units up front. Will keep you guys updated. But feedback would be appreciated.
I am in as long as the price is reasonable. And yes to the tow hook. Thank you sir for your contributions.
__________________
SlowLS1 is offline   Reply With Quote
Old 10-06-2023, 06:51 AM   #52
fnhowe84
 
fnhowe84's Avatar
 
Drives: 2018 Hotwheels M6 & 2010 1LE V6 M6
Join Date: Dec 2016
Location: VA
Posts: 310
im in on the bar, i can take or leave the toe hooker
__________________
CamaroLIFE
fnhowe84 is offline   Reply With Quote
Old 10-06-2023, 08:35 AM   #53
The_bald_eagle_machine
Anthony S
 
The_bald_eagle_machine's Avatar
 
Drives: 2011 chevrolet camaro 2ss/rs
Join Date: Apr 2021
Location: Chiefland, FL
Posts: 942
Concerns on price are noted. I am here to support my community and make a buck. Not looking to get rich.

Tow hook would be purchased seperately. But they will develop the crash bar with the Zl1addons tow hook as the standard. I am ordering one and having it sent to them for fitment.

They told me that if this project is successful, they will be interested in making a rear crash bar as well.

This project may take a little time but it looks like I have 3 interested so far.
Front bar
-Olblue75
-SlowLs1
-Fnhowe84
- 500hpbluez28
-Deftones - 2 pieces
- ScottyD

Rear bar
-Scooter18155
-Olblue75
-Shodown
-Fnhowe84
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181

Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR font and rear sway bars, Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links.

Last edited by The_bald_eagle_machine; 10-17-2023 at 12:11 PM.
The_bald_eagle_machine is online now   Reply With Quote
Old 10-06-2023, 09:20 AM   #54
Scooter18155
 
Scooter18155's Avatar
 
Drives: 2010 ss/rs 6 speed manual
Join Date: Aug 2013
Location: Ny
Posts: 584
I would be interested in a rear crash bar myself if it gets that far. I already have a front one already.
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
Scooter18155 is offline   Reply With Quote
Old 10-06-2023, 11:11 PM   #55
olblue75


 
olblue75's Avatar
 
Drives: 2010 2SS/RS
Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
Would be interested in rear bar as well again depending on price.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.
olblue75 is offline   Reply With Quote
Old 10-07-2023, 10:00 PM   #56
The_bald_eagle_machine
Anthony S
 
The_bald_eagle_machine's Avatar
 
Drives: 2011 chevrolet camaro 2ss/rs
Join Date: Apr 2021
Location: Chiefland, FL
Posts: 942
Just for context. I ordered a ZL1 addons tow hook and sent it to RSM on Friday. So they are going to test fit and make me a prototype to test fit on my car. If all goes well, I'll approve the sample and get a small run made up for you guys. They will be branded RSM. I'll keep you guys updated as much as possible.
__________________
Follow me on instagram @The_bald_eagle_machine
https://www.camaro5.com/forums/showthread.php?t=600181

Mods: Texas Speed 2 inch headers, high flow cats, and X-pipe. Custom mid-pipe, Borla Xr1 mufflers. Torqstorm Supercharger, 3.1" pulley, ZL1 fuel pump. MGW Shifter, Mcleod RST clutch, Tick master cylinder and Tick Billet bushing reinforced slave cylinder. DSS One-piece 3.5" Driveshaft, Metco Driveshaft safety loop, BCRacing Coilovers. BMR font and rear sway bars, Poly Diff bushings, Poly Rear cradle bushings, Sub-frame connectors, Lower control arms, camber arms, and toe links.
The_bald_eagle_machine is online now   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:18 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.