Z/28 Parts List

[2SSRS@Gen5diy]

Most parts are not out, but keep trying they will get out soon.

[Midnight Rat]

What about the cai and filter? Is there any pn for these items?

[The Stig]

Originally Posted by 2013 1LE

What about the cai and filter? Is there any pn for these items?

Would it fit an LS3?

[Nick S]

I've done some e searching but can't find the specs on the Z/28 stabilizer bars. Anyone know what diameters GM is running front and rear on the Z/28?

Part numbers perhaps? Curious to know if they are different than the 1LE stabilizer bars.

[tramtwo]

Originally Posted by Nick S

I've done some e searching but can't find the specs on the Z/28 stabilizer bars. Anyone know what diameters GM is running front and rear on the Z/28?

Part numbers perhaps? Curious to know if they are different than the 1LE stabilizer bars.

It is a different type of front suspension setup Pete put out the specs a few months ago... other components in the front allow for a smaller bar.

I'll dig around and see if I can find it...

EDIT: Here ya go Nick. http://www.camaro5.com/forums/showpo...ostcount=13812

[Nick S]

Originally Posted by tramtwo

It is a different type of front suspension setup Pete put out the specs a few months ago... other components in the front allow for a smaller bar.

I'll dig around and see if I can find it...

EDIT: Here ya go Nick. http://www.camaro5.com/forums/showpo...ostcount=13812

Thanks Dale!

It's looking like in order to obtain optimum handling with Z/28 suspension parts it will either all need to be done or none at all! At least if you are a system person and not just a person that likes to throw parts at a car and hope they all work together.

[Firefighter]

Most of the regular Camaro's would be best suited with the 1LE set up or a 1LE 27mm front bar and the 32mm rear bar.

Sent from my DROID RAZR HD using Tapatalk

[woodside783]

Anyone know about the rear knuckles

[Nutro]

Come on! The Grille needs to come avail like yesterday!

[SSTG]

Originally Posted by Nutro

Come on! The Grille needs to come avail like yesterday!

[Midnight Rat]

I was under the impression it would, being that i saw it somewhere as future upgrades.

Originally Posted by The Stig

Would it fit an LS3?

[Nutro]

Originally Posted by radrace19

This is what the catalog shows for that grill, but it may not be correct.
If I'm wrong someone let me know. I'm not 100% up to date with the Camaro grills.

Can you please post the whole illustration of that '14 front end with all part numbers on it like clips, screws, bowtie emblem etc etc?

[The Stig]

Originally Posted by Nutro

Can you please post the whole illustration of that '14 front end with all part numbers on it like clips, screws, bowtie emblem etc etc?

The diagrams dont' usually have part numbers on them, or at least on GM Parts Direct they don't/

[Nick S]

Originally Posted by The Stig

The diagrams dont' usually have part numbers on them, or at least on GM Parts Direct they don't/

If you add the part to your cart and then go check out and type "I Agree" twice when GMPD asks you to then the summary page will list the GM part numbers for you.