09-26-2021, 10:30 PM | #1 |
Drives: 2011 Camaro 2SS/RS Join Date: Jan 2011
Location: Azusa, CA
Posts: 360
|
Goodridge - Rears don’t fit
Went to install my new lines today, but the rear lines won’t fit through the bracket that has the one flat side on it. It’s too large and will not go through. Is this a known issue or did the packaging at the manufacture get messed up. The part number on the box is correct: 12219
I ordered them through Phastek. Thanks
__________________
Allen
2011 Camaro 2SS/RS Last edited by dma05; 09-26-2021 at 10:31 PM. Reason: More info |
09-27-2021, 07:21 AM | #2 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,735
|
I used their 12227 kit when I switched to ZL1 brakes and the lines fit perfectly. A pic of the problem might help.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. Last edited by CamaroCracka; 09-27-2021 at 01:59 PM. |
09-27-2021, 10:07 AM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
An move to the suspension, chassis an steering might get you some more answers as well.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
09-27-2021, 10:31 AM | #4 | |
Drives: 2011 Camaro 2SS/RS Join Date: Jan 2011
Location: Azusa, CA
Posts: 360
|
Quote:
Thanks
__________________
Allen
2011 Camaro 2SS/RS |
|
09-28-2021, 12:08 AM | #5 |
Drives: 2011 Camaro 2SS/RS Join Date: Jan 2011
Location: Azusa, CA
Posts: 360
|
I contacted Phastek who contacted Goodridge who then contacted me. It seems that it was a problem with packaging at the manufacturer. I will have an answer by tomorrow and hopefully a new set of lines on the way.
__________________
Allen
2011 Camaro 2SS/RS |
|
|
|
|