11-06-2015, 11:21 AM | #1 |
Drives: 2014 ZL1 M6 Join Date: Jul 2014
Location: Virginia
Posts: 493
|
tpms sensor question
What is the correct part number for the OEM ZL1 tpms sensor?
I have seen 2 or 3 different part numbers floating around. Thanks Tony
__________________
2014 ZL1 M6
Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq |
11-06-2015, 12:18 PM | #2 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,290
|
You can buy sensors at just about any parts house and get them cheaper than OE ones. Unless you just want to pay more and get OE ones the ones at the parts houses work just as good. Sorry I do not know the part numbers for the GM ones.
|
11-06-2015, 02:14 PM | #3 |
Drives: 2014 ZL1 Join Date: Feb 2014
Location: Tustin, CA
Posts: 237
|
https://www.amazon.com/gp/product/B0...=ATVPDKIKX0DER
These are the correct ones for a zl1. I purchased a set for my spare set of wheels. |
11-06-2015, 02:26 PM | #4 |
Drives: 2013 BRM ZL1 Camaro M6 Join Date: Feb 2014
Location: Auckland, New Zealand
Posts: 160
|
From what I have read, there was a change to the TPMS used in the first ZL1s, where you need a learning tool for the TPMS used in the later ZL1s.
http://www.amazon.com/gp/product/B00...ilpage_o00_s00 You may need the nuts also. http://www.amazon.com/gp/product/B00...ilpage_o09_s00 |
11-06-2015, 02:43 PM | #5 |
Drives: 2013 HWSE Indy Festial #26 Join Date: Mar 2011
Location: Fredericksburg, VA
Posts: 2,670
|
I have 3 new sensors for sale. 50.00 shipped. I have no need for them since they won't fit my Z/28 wheels.
__________________
There are only so many days in your lifetime. So get out and drive your Camaro...
Dan |
11-10-2015, 11:12 AM | #6 |
Drives: 2014 ZL1 M6 Join Date: Jul 2014
Location: Virginia
Posts: 493
|
Does the 2014 require the relearn tool?
Tony
__________________
2014 ZL1 M6
Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq |
11-10-2015, 11:29 AM | #7 |
Drives: '12 ZL1 #1609 Join Date: Feb 2010
Location: Georgia
Posts: 1,762
|
Yes the tool was required starting in the middle of the 2011 production run and from then on for all model Camaro's.
__________________
Life is too short to drive cars that suck.
My build Thread |
11-10-2015, 11:33 AM | #8 |
Drives: 2014 ZL1 Join Date: Feb 2014
Location: Tustin, CA
Posts: 237
|
|
|
|
Thread Tools | |
|
|