Whipple 6 rib pulley. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ToddB · 04-07-2015, 05:44 AM

Did some searching but could not find a good answer. What is the smallest 6 rib pulley you can use without getting belt slip. I am using a 3.875 now with no slip but may go smaller if I can without getting belt slip. Thanks.

Sent from my iPhone using Tapatalk

Batmanntexas · 04-07-2015, 01:15 PM

ToddB,

I'm currently running a 3.75" 6-rib without any belt slip issues. I think it all depends on how much belt wrap you can get. With my current setup, I have about 60-65% belt wrap of the drive pulley. I'm pretty confident that I could drop to a 3.5" and still be good to go on the 6-rib setup.

-Scott

ToddB · 04-07-2015, 07:39 PM

Thanks. I'm going with a 3.625 and adding meth.

04-07-2015, 05:44 AM	#1
ToddB Drives: 2011 2SS Convertible Supercharged Join Date: Nov 2010 Location: WI Cert Welder Navy NSSN Posts: 1,157	Whipple 6 rib pulley. Did some searching but could not find a good answer. What is the smallest 6 rib pulley you can use without getting belt slip. I am using a 3.875 now with no slip but may go smaller if I can without getting belt slip. Thanks. Sent from my iPhone using Tapatalk

04-07-2015, 01:15 PM	#2
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	ToddB, I'm currently running a 3.75" 6-rib without any belt slip issues. I think it all depends on how much belt wrap you can get. With my current setup, I have about 60-65% belt wrap of the drive pulley. I'm pretty confident that I could drop to a 3.5" and still be good to go on the 6-rib setup. -Scott __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14

04-07-2015, 07:39 PM	#3
ToddB Drives: 2011 2SS Convertible Supercharged Join Date: Nov 2010 Location: WI Cert Welder Navy NSSN Posts: 1,157	Thanks. I'm going with a 3.625 and adding meth.