06-16-2018, 02:41 PM | #1 |
Drives: 2010 camaro ss Join Date: Nov 2017
Location: north carolina
Posts: 57
|
Broken transmission
So last night at the drag strip when i hit 2nd gear i believe th output shaft broke havent got it on a lift yet but do know from what i can see the drive shaft is resting on the trans mount and its pouring trans fluid . Sooooooo what are my best trans options ? I see rpm transmissions sells some built ones . Should i stay with the 6060 ? Just replace it or repair it ?
|
06-17-2018, 12:42 AM | #2 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
If you have the original 2010 trans, it does not have an output shaft support bearing in the tailshaft. It will probably be about the same $$ to repair yours or get another one with low miles. The 6060 is pretty strong. The auto cars are quicker though
I happen to have a spare from a 2015 z28 with less than 1000 miles. PM if interested
__________________
|
06-17-2018, 11:09 AM | #3 |
'69 Owned Since '79
Drives: '69 Z/28 LeMans Blue w/White Join Date: Oct 2008
Location: LR AR
Posts: 1,847
|
The original output shafts on the 2010's had some that were breaking. Long time ago I know. You can have yours rebuilt and maybe even add the rear support bearing. That is probably what I would do.
|
06-17-2018, 11:26 AM | #4 |
Drives: 2010 camaro ss Join Date: Nov 2017
Location: north carolina
Posts: 57
|
Havent got it up on the lift yet but this is what i got hard to tell really maybe ill luck out but i doubt it
|
|
|
|
|