![]() |
|
|
#267 |
|
"Cam Only"
|
Wish I could still find these. Maybe one day I'll get lucky and can get the real ones and not run the reps.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger, Monster S Series Triple Disc Clutch | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/674rwtq |
|
|
|
|
|
#268 |
![]() |
It’s just not a good idea you can get those tho I just saw them somewhere. It literally goes against everything the engineers at Chevy performance did and basically makes it all a waste. They gotta be boxed it was specifically engineered that way. I’m not entirely opposed to keeping the offset wheels the way they are and then going a little bigger on the tires to get more surface area but it’s gotta be done with the same width on the front and back or it throws it all off and it will never handle the same. The 5th gen zr1’s really can’t even **** with a 1le on a track. Obviously need a bit more power but you get 560-580hp out of a 1le and it will eat a zl1 alive on a track. 5th gen only of course.
|
|
|
|
|
|
#269 | |
|
Searching for the truth
|
Quote:
__________________
|
|
|
|
|
|
|
|
|
![]() |
| Thread Tools | |
|
|