You are browsing camaro5 
 |
|
08-22-2016, 01:53 PM
|
#1 |
 
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
Aftermarket Heated Seats - Need Seat Connector Pinout 2015 LS
I bit the bullet on new Katzkin leather seat covers and bought seat heaters to go along with them. Original seats are cloth and no heaters.
The heater kits from Katzkin have the heater harness, relays, and switches with them. What I am thinking is that I should be able to just connect into the power feed under each seat. I believe each seat connector has a power feed for the back heater and another power feed for the seat heater. If so, does anyone know what pins these are or what colors they are and if this would work? I wanted to just change out the dash control panel but finding one for a 2014 or 2015 at a decent price has not worked out. Although the panels look the same, the earlier models are a different P/N and will not work from what I have been told. Would appreciate any info that may be available. |
|
|
|
08-26-2016, 08:10 AM
|
#2 |
|
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
.
|
|
|
|
|
08-28-2016, 06:09 PM
|
#3 |
 
Drives: 2013 Victory Red ZL1 M6 Vert Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 58
|
I think they are logic controlled anyway, it uses can buss. Just add a button to each seat and call it done. I did that on my daughters G6.
__________________
2013 ZL1 M6
 Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils. White Collar Grease Monkey https://www.youtube.com/user/gjodexter |
|
|
|
|
08-29-2016, 08:49 AM
|
#4 | |
|
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
Quote:
Thanks, I was already starting to lean that way. I was hoping to tap into the main power under each seat and then when I changed to an aftermarket dash panel for a new sound head unit I could have potentially leveraged the functions then. The factory panel was like $500. Crazy... |
|
|
|
|
|
08-29-2016, 05:01 PM
|
#5 |
 Drives: 2ss/rs Join Date: Apr 2016
Location: space
Posts: 334
|
have to ask what will this cost you when all said and done..
|
|
|
|
|
08-30-2016, 12:14 PM
|
#6 | |
|
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
Quote:
Leather custom seat covers from Katzkin Canada Seat Covers: $1143.96 Included the heated seat kits (upper and lower) with relay and switch harness. Shipping included. Had them on my doorstep within a week. Seat and Heater Installation: $450 That is assuming to just use their installation kit and not trying to adopt the factory setup. There was also a big range in cost on installers from one shop to another. Install going in tomorrow. I will post up afterwards. |
|
|
|
|
|
08-30-2016, 12:39 PM
|
#7 |
|
Drives: 2ss/rs Join Date: Apr 2016
Location: space
Posts: 334
|
[QUOTE=MyLocalDJ;9285606]************************
Leather custom seat covers from Katzkin Canada Seat Covers: $1143.96 Included the heated seat kits (upper and lower) with relay and switch harness. Shipping included. Had them on my doorstep within a week. Seat and Heater Installation: $450 That is assuming to just use their installation kit and not trying to adopt the factory setup. There was also a big range in cost on installers from one shop to another. good luck 
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
