04-30-2016, 03:22 PM | #1 |
Drives: 2013 SW 2SS/1LE Join Date: Jan 2014
Location: San Diego
Posts: 316
|
Hood done and on. Testing time next weekend at ACS
The vented hood will be put to test next weekend.
__________________
2013 2SS SW 1LE
478rwhp/427rwtq Cunningham Motorsports built and tuned stage 2 cam with WCCH ported heads. |
04-30-2016, 07:23 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
What vents are those???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
04-30-2016, 07:51 PM | #3 |
Drives: 2013 SW 2SS/1LE Join Date: Jan 2014
Location: San Diego
Posts: 316
|
They are currently a one of a kind RnD set from my bros company Singular motorsports
__________________
2013 2SS SW 1LE
478rwhp/427rwtq Cunningham Motorsports built and tuned stage 2 cam with WCCH ported heads. |
05-01-2016, 02:37 AM | #4 |
Drives: Summit White 2015 1LE 2SS/RS Join Date: Feb 2016
Location: Tacoma, WA
Posts: 37
|
Nice looking ride my man
|
05-01-2016, 02:56 AM | #5 |
Drives: 2012 1SS M6 IOM Join Date: Dec 2012
Location: New Rochelle New York
Posts: 1,428
|
I can only assume that you track your car.
Again, I will also assume that this will vent the heat out of the engine bay nicely. Can these vents be closed? Just wondering about if it rains.
__________________
2012 1SS Camaro LS3 Inferno Orange
Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018. |
05-01-2016, 03:15 AM | #6 |
Drives: '16 C7 Z51 Join Date: May 2012
Location: Redmond, WA
Posts: 3,056
|
I do have the singular brand vents on my Miata. They did not come with any cover for rain or regular street use, but I easily fabricated covers using polycarbonate cut to the shape and fastened with wing-nuts.
__________________
'16 Corvette C7 Z51 1LT (Build Thread)
'14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD |
05-01-2016, 10:03 AM | #7 | |
Drives: 2013 SW 2SS/1LE Join Date: Jan 2014
Location: San Diego
Posts: 316
|
Thanks DAWG! Sweet one you get there your self!
Quote:
Heat extraction and lift reduction is the main focus of these. The 10-13 suffered from front end lift at speed, I will know pretty quickly next weekend when I hit the banking at ACS. Previously front end would push bad at about 130, hope to be more planted. }\ I have talked with my bro and his partner about making some but they are easily fabricated with some thin sheet aluminum or as he did poly. Nice X25 looks good. Always nice to see my bros products out there.
__________________
2013 2SS SW 1LE
478rwhp/427rwtq Cunningham Motorsports built and tuned stage 2 cam with WCCH ported heads. |
|
05-01-2016, 10:49 AM | #8 |
Drives: 2015 Red Hot Camaro 2LT RS Join Date: Apr 2016
Location: Illinois
Posts: 4
|
That sure is a beauty! Functional and in my opinion, adds a bit of a fear factor!
|
05-01-2016, 02:16 PM | #9 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
|
|
|
|
|