Where can I find these zip ties? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Roamer63 · 10-26-2020, 09:25 PM

I would like to replace several of these stud stand off wire ties. Can't seem to find anything on the web. Little help please.

InFiD3ViL · 10-26-2020, 09:36 PM

Where exactly is that located? What is it holding down?

Roamer63 · 10-26-2020, 10:41 PM

That one is holding down a ground cable under the hood. ( easy to take a pic). There are several more in the trunk/batt. area that I would like to replace.

sdynak · 10-27-2020, 04:39 AM

Google search stud mount ties and look at images.. there are options.

Here is a similar Amazon Prime if you were in a hurry.. Worst case if you want OEM I'm sure the dealer could order them.

https://www.amazon.com/HellermannTyt...%2C174&sr=8-24

Or these

https://www.amazon.com/Panduit-PLST4...%2C174&sr=8-15

demonspeed · 10-27-2020, 07:44 AM

You could also just get it from the dealership. At least just get the part number and I’m sure you’d find a pile cheaper

Roamer63 · 10-27-2020, 08:01 AM

Thank you Sydnak. A little pricey but they would work. However that may be cheap compared to what the dealer would charge.

Ashen 6.2 · 10-27-2020, 08:54 AM

Try looking at these - https://www.mcmaster.com/cable-ties/...-cable-ties-6/

or these - https://www.amazon.com/Gardner-Bende.../dp/B000BOE0TM

mikeman · 10-27-2020, 09:01 AM

Those look like the same wire tie downs inside the trunk/spare tire well that hold the battery wires/rear wiring harness against the body.

Roamer63 · 10-27-2020, 10:17 AM

Thanks guys. This forum has been very helpful.

oldman14ss · 10-28-2020, 09:08 PM

yes these folks are great! I've listened to the voice of experience on this site more than you can imagine. these guys have taught this old dog new tricks for sure.

InFiD3ViL · 10-28-2020, 09:24 PM

I have searched far and wide over the last few days as a result of this thread (It's a weird hobby), but cannot find these exact GM cable tie downs. Maybe better luck would be found at a GM dealership or body shop, which I did not try. Thankfully due to some of our other members we now know that there are suitable alternatives. This isn't so much an issue now as it will be in the future, when someone is trying to faithfully restore their 5th gen to exact factory specs. Luckily, 3D printers should be amazing in 20-30 years!

It is a possibility that these connectors are available only with the purchase of their respective master part. For example, I learned that if you purchase a new OEM negative or positive battery cable, it comes with these cable ties already attached, perfectly aligned so they can easily connect to the existing studs/anchor points. I saw this on several sites. But none of the parts sites actually list or catalog the cable ties individually, only as part of or included with their master part. Thanks again GM!

Ashen 6.2 · 10-29-2020, 06:16 AM

Quote:

Originally Posted by InFiD3ViL

I have searched far and wide over the last few days as a result of this thread (It's a weird hobby), but cannot find these exact GM cable tie downs.

I am the same way sometimes! lol

Here is another one I found and looks very close to what GM uses.

https://www.ebay.com/p/1751570248 - Im not sure if this is the size you need though.

Avery Denison is the mfg and here is a link to their catalog - https://fastener.averydennison.com/c...%20Rev%20A.pdf

Roamer63 · 10-29-2020, 07:44 AM

Thanks again guys. The ebay ones look good Ashen. Once you pull the O.E. off, they're pretty much done. I'd like to replace them with O. E. I need to talk to my local dealership and see what they say.

Caddytech112 · 10-29-2020, 09:15 AM

Auveco sells factory clips, ties, connectors ect. Check their site they will have it.

10-26-2020, 09:25 PM	#1
Roamer63 Drives: 2014 camaro 2ss/rs Join Date: Oct 2020 Location: Nebraska Posts: 57	Where can I find these zip ties? I would like to replace several of these stud stand off wire ties. Can't seem to find anything on the web. Little help please. Attached Images

10-26-2020, 09:36 PM	#2
InFiD3ViL Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016 Location: Spring Hill, FL Posts: 4,570	Where exactly is that located? What is it holding down? __________________ 2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI

10-27-2020, 04:39 AM	#4
sdynak Drives: 2010 1SS Join Date: Aug 2015 Location: Bayville, NJ Posts: 936	Google search stud mount ties and look at images.. there are options. Here is a similar Amazon Prime if you were in a hurry.. Worst case if you want OEM I'm sure the dealer could order them. https://www.amazon.com/HellermannTyt...%2C174&sr=8-24 Or these https://www.amazon.com/Panduit-PLST4...%2C174&sr=8-15 __________________ 2010 1SS LS3, Black, 235/250, .621/.615, 114 + 4, Kooks Stepped Headers, 3.91's, Bo White PTB, Flowmaster Mufflers, Cold Air Industries CAI, Apex Scoop & Windshield Washer Relocate, SLP Wheels, Skip Shift Eliminate, Barton Flat Stick, OEM HID/Halos, Dyno Tuned by ECS

10-27-2020, 07:44 AM	#5
demonspeed not afraid of the wall Drives: Camaros Join Date: Apr 2010 Location: Pittsburgh Posts: 2,148	You could also just get it from the dealership. At least just get the part number and I’m sure you’d find a pile cheaper __________________ 2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT 10/13/22: 1100 Past Camaros: 13 1LE\|02 SS\|01 Z28\|00 SS\|91 1LE\|91 Z28\|89 IROC-Z

10-27-2020, 08:54 AM	#7
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 1,993 View My Garage	Try looking at these - https://www.mcmaster.com/cable-ties/...-cable-ties-6/ or these - https://www.amazon.com/Gardner-Bende.../dp/B000BOE0TM __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, RPM 5” CAI, Kooks Headers, Solo Cat Back, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP

10-26-2020, 10:41 PM	#3
Roamer63 Drives: 2014 camaro 2ss/rs Join Date: Oct 2020 Location: Nebraska Posts: 57	That one is holding down a ground cable under the hood. ( easy to take a pic). There are several more in the trunk/batt. area that I would like to replace.

10-27-2020, 08:01 AM	#6
Roamer63 Drives: 2014 camaro 2ss/rs Join Date: Oct 2020 Location: Nebraska Posts: 57	Thank you Sydnak. A little pricey but they would work. However that may be cheap compared to what the dealer would charge.

10-27-2020, 09:01 AM	#8
mikeman Banned Drives: 2015 Camaro Join Date: Aug 2018 Location: My Garage Posts: 1,125	Those look like the same wire tie downs inside the trunk/spare tire well that hold the battery wires/rear wiring harness against the body.

10-27-2020, 10:17 AM	#9
Roamer63 Drives: 2014 camaro 2ss/rs Join Date: Oct 2020 Location: Nebraska Posts: 57	Thanks guys. This forum has been very helpful.

10-28-2020, 09:08 PM	#10
oldman14ss Drives: 2014 1ss camaro Join Date: Jul 2017 Location: missouri Posts: 705	yes these folks are great! I've listened to the voice of experience on this site more than you can imagine. these guys have taught this old dog new tricks for sure.

10-28-2020, 09:24 PM	#11
InFiD3ViL Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016 Location: Spring Hill, FL Posts: 4,570	I have searched far and wide over the last few days as a result of this thread (It's a weird hobby), but cannot find these exact GM cable tie downs. Maybe better luck would be found at a GM dealership or body shop, which I did not try. Thankfully due to some of our other members we now know that there are suitable alternatives. This isn't so much an issue now as it will be in the future, when someone is trying to faithfully restore their 5th gen to exact factory specs. Luckily, 3D printers should be amazing in 20-30 years! It is a possibility that these connectors are available only with the purchase of their respective master part. For example, I learned that if you purchase a new OEM negative or positive battery cable, it comes with these cable ties already attached, perfectly aligned so they can easily connect to the existing studs/anchor points. I saw this on several sites. But none of the parts sites actually list or catalog the cable ties individually, only as part of or included with their master part. Thanks again GM! __________________ 2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI

10-29-2020, 07:44 AM	#13
Roamer63 Drives: 2014 camaro 2ss/rs Join Date: Oct 2020 Location: Nebraska Posts: 57	Thanks again guys. The ebay ones look good Ashen. Once you pull the O.E. off, they're pretty much done. I'd like to replace them with O. E. I need to talk to my local dealership and see what they say.

10-29-2020, 09:15 AM	#14
Caddytech112 Drives: 2013 2ls camaro Join Date: Jan 2017 Location: Cromwell Ct. Posts: 8	Auveco sells factory clips, ties, connectors ect. Check their site they will have it.