10-02-2016, 09:51 PM | #1 |
Drives: black car Join Date: Jun 2016
Location: Los Angeles
Posts: 3
|
68 wiper arm /motor problem ?
I'm not the technical guy, just the owner-forgive me if I don't know all the names of the parts. OK- the place that holds the arm assembly to the motor - there is a screw that goes on to hold the arm. When the arm is off we turn on the wipers they little bolt area is spinning as it should.
https://descargartonos.info/sueno-be...o-alboran.html As soon as we attach the arm, they go about half way and stop- like it's hitting something and jamming, but it's not. When we manually pull on the arm it will move about half, then it stops. We tried putting the arm "bracket" on, top, bottom etc.. (meaning the arm is above the bracket and bolt, or below) Hope that makes sense- what could be causing the motor to spin fine with no arms attached, then when attached, only move half the way?? Thanks Last edited by Luxion; 06-07-2020 at 02:30 AM. |
10-03-2016, 11:04 AM | #2 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
Go see the gang over at Team Camaro
camaros.net They will have your answer!
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
|
|
|
|