2014 Camaro Rear Bumper Conversion - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

chevy24@Gen5diy · 01-10-2014, 11:18 AM

Here is a list of the part numbers need to install the new 2014 rear bumper on prior year camaro's. The prices listed are GM list prices. I don't have a hardware list yet, so that will be a rough quote for now, until we actually do a conversion and now what is all needed... Also GM for some very strange reason has put core charges on the rear bumper and diffuser. Unfortunately turning in your old bumper and diffuser wont give you the core charge money back, since it is not the exact part.

List:
Upper Bracket:22833655 $17.37

Fascia w/park assist sensor holes:23164145 $495 + $75 core
Fascia w/o park assist sensor holes:23164146 $498 + $75 core

Absorber:22829531 $122.53

Brackets: L&R 22829479,22829480 $13.82 each

Diffuser w/single tip:22829476 $126.07 + $75 core
Diffuser w/dual tip(1LE style):22829477 $139.60 + $75 core

Outer brackets L&R:22915167,22915168 $14.57 each

Outer brackets L&R:23186324,23186325 $34.60 each

Lower brackets:23104631 x 2 $8.65 each

Mounting screws,retainers and rivets:$100

Also new taillights will be required for the install.

GundamX7X · 01-11-2014, 10:28 AM

I for one can't wait to see this done and to see the package cost.

el ess A · 01-11-2014, 11:07 AM

With parts listed and $100 for bolts and such, cheapest pricing I can get so far is $975 WITHOUT any taillamps, trunklid (and trunklid bits) and spoiler.

Going to be an expensive proposition for anyone wanting to update.

GundamX7X · 01-12-2014, 09:53 AM

Quote:

Originally Posted by el ess A

With parts listed and $100 for bolts and such, cheapest pricing I can get so far is $975 WITHOUT any taillamps, trunklid (and trunklid bits) and spoiler.

Going to be an expensive proposition for anyone wanting to update.

Very true it might hit about $1,500 but I hope at least a package deal comes out. Also I hope they release the z28 prototype wing along with the z28 diffuser. I wonder if anybody is currently producing any after market taillights for 2014 Camaros like spyder did for the 10-13 Camaro, would be nice to see what they come up with.

My question is will the new sensors, trunk light, plate light, taillights and backup camera be compatible with the 10-13 wiring harness or will it require a new wire harness.

Jason@JacFab · 01-12-2014, 10:32 AM

Thanks for posting, I was having a hard time finding part numbers for any 2014 stuff. Just ordered a new diffuser yesterday so I can get it painted body color, it was 97 dollars and some change. Don't suppose anyone has a diagram of the rear showing how it comes apart so I don't damage anything?

Angrybird 12 · 01-12-2014, 10:50 AM

I think people are going to find it's going to be a lot more involved with many more parts than they think to do a conversion. And the cost will be a lot higher than anyone anticipates.
IMO best thing to do if you want a 2014 look is trade for a 2014..

2SSRS@Gen5diy · 01-12-2014, 11:33 AM

On a side note, got a new 2010 bumper last week for the 69 tail light look, and it had no back up sensors, but did come with the new back up camera hole, LOL after this is done will do the 2014 rear and front on a 2010 car.

el ess A · 01-12-2014, 01:53 PM

Well, if anyone can come up with a package deal, Ofer would be one to put money down on!

GundamX7X · 01-27-2014, 03:20 PM

Quote:

Originally Posted by Angrybird 12

I think people are going to find it's going to be a lot more involved with many more parts than they think to do a conversion. And the cost will be a lot higher than anyone anticipates.
IMO best thing to do if you want a 2014 look is trade for a 2014..

I still love my 2013, I'm trying to focus on the parts I deem necessary to change and create something new. For me to trade my car in to get a 14 would cost me an extra $7,000, besides if I had the 14, I would have to change the front end, I do not like the refresh look compared to the zl1.

DagoCountyGee · 03-15-2014, 05:42 PM

So has anyone done this?

ZL1 Spoked · 03-17-2014, 02:03 AM

I'm waiting too

01pewterz28 · 03-17-2014, 09:10 AM

Yep I am in the same boat I am waiting to see it done I am ready to do the conversion

GundamX7X · 04-05-2014, 02:43 AM

Just wondering if anybody has any pics or updated info on this

Pagliaro · 04-05-2014, 06:44 AM

Nutro will be doing this from the sounds of it. He already did the front end which looks amazing in SGM.

01-10-2014, 11:18 AM	#1
chevy24@Gen5diy Drives: 2010 1SS Join Date: Apr 2013 Location: arizona Posts: 105	2014 Camaro Rear Bumper Conversion Here is a list of the part numbers need to install the new 2014 rear bumper on prior year camaro's. The prices listed are GM list prices. I don't have a hardware list yet, so that will be a rough quote for now, until we actually do a conversion and now what is all needed... Also GM for some very strange reason has put core charges on the rear bumper and diffuser. Unfortunately turning in your old bumper and diffuser wont give you the core charge money back, since it is not the exact part. List: Upper Bracket:22833655 $17.37 Fascia w/park assist sensor holes:23164145 $495 + $75 core Fascia w/o park assist sensor holes:23164146 $498 + $75 core Absorber:22829531 $122.53 Brackets: L&R 22829479,22829480 $13.82 each Diffuser w/single tip:22829476 $126.07 + $75 core Diffuser w/dual tip(1LE style):22829477 $139.60 + $75 core Outer brackets L&R:22915167,22915168 $14.57 each Outer brackets L&R:23186324,23186325 $34.60 each Lower brackets:23104631 x 2 $8.65 each Mounting screws,retainers and rivets:$100 Also new taillights will be required for the install. Last edited by chevy24@Gen5diy; 01-10-2014 at 11:37 AM.

01-11-2014, 11:07 AM	#3
el ess A Older Than Dirt Drives: 2010 & 2013 Camaros Join Date: Apr 2010 Location: Aiken, SC Posts: 4,564	With parts listed and $100 for bolts and such, cheapest pricing I can get so far is $975 WITHOUT any taillamps, trunklid (and trunklid bits) and spoiler. Going to be an expensive proposition for anyone wanting to update. __________________ 2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54

01-12-2014, 10:50 AM	#6
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	I think people are going to find it's going to be a lot more involved with many more parts than they think to do a conversion. And the cost will be a lot higher than anyone anticipates. IMO best thing to do if you want a 2014 look is trade for a 2014.. __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

01-12-2014, 01:53 PM	#8
el ess A Older Than Dirt Drives: 2010 & 2013 Camaros Join Date: Apr 2010 Location: Aiken, SC Posts: 4,564	Well, if anyone can come up with a package deal, Ofer would be one to put money down on! __________________ 2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54

03-15-2014, 05:42 PM	#10
DagoCountyGee Drives: '15 SS Join Date: Sep 2012 Location: North County Posts: 1,235	So has anyone done this? __________________ Follow My Car on INSTAGRAMhttp://www.instagram.com/forb1dd3n_ss

01-11-2014, 10:28 AM	#2
GundamX7X Drives: 2013 Camaro SS Join Date: Apr 2013 Location: KY Posts: 115 View My Garage	I for one can't wait to see this done and to see the package cost.

01-12-2014, 10:32 AM	#5
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,688 View My Garage	Thanks for posting, I was having a hard time finding part numbers for any 2014 stuff. Just ordered a new diffuser yesterday so I can get it painted body color, it was 97 dollars and some change. Don't suppose anyone has a diagram of the rear showing how it comes apart so I don't damage anything?

01-12-2014, 11:33 AM	#7
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	On a side note, got a new 2010 bumper last week for the 69 tail light look, and it had no back up sensors, but did come with the new back up camera hole, LOL after this is done will do the 2014 rear and front on a 2010 car.

03-17-2014, 02:03 AM	#11
ZL1 Spoked Drives: Camaro ZL1 Join Date: Aug 2012 Location: CA Posts: 1,131	I'm waiting too __________________ -2013 Camaro ZL1-Black Stripe Package-Ambient Light Kit-Subwoofer Package-Sunroof-Suede Package-NAV MYLINK-MANUAL BABY-Dual Vented Fenders-Exposed Carbon Fiber Insert -Black 10 Spoke Wheels 604 RWHP 602 LBS/TQ

03-17-2014, 09:10 AM	#12
01pewterz28 #TeamBeckyD Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008 Location: Apopka, FL Posts: 10,496 View My Garage	Yep I am in the same boat I am waiting to see it done I am ready to do the conversion __________________ #TeamBeckyD FIFTY HBM 2SS VERT

04-05-2014, 02:43 AM	#13
GundamX7X Drives: 2013 Camaro SS Join Date: Apr 2013 Location: KY Posts: 115 View My Garage	Just wondering if anybody has any pics or updated info on this __________________ In ? we trust.

04-05-2014, 06:44 AM	#14
Pagliaro RIP Betsy ( Vitara ) Drives: '11 SGM 1LT/RS Join Date: Oct 2012 Location: Ottawa, Ontario Posts: 1,178	Nutro will be doing this from the sounds of it. He already did the front end which looks amazing in SGM. __________________ First retrofitted 2014 mylink.