Engine Upgrade Shops in Portland, OR. area - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

evonschu · 03-04-2016, 06:54 PM

Looking to get some more in depth engine mods on my ZL1 (pulleys, injectors, headers, heat exchanger, and possibly a more aggressive cam). Wanted a shop local to Portland, OR. I've contacted a few but all are dragging their feet on getting me quotes, etc which doesn't make any sense to me. Anyone know of good, reputable shops in the area that could get these mods installed?

Nor Cal ZL1 · 03-05-2016, 10:31 AM

Contact owhite3003 the originator of this linked thread.

http://www.camaro5.com/forums/showthread.php?t=430179

He is from your area. He is probably going to recommend

http://www.jdpmotorsports.com/

And

https://starkweatherperformance.com/

He will set you straight on what direction to take.
Best wishes for your build. The above are among the best of the best. If your doing a cam this is absolutely important to use a very reputable shop. I am partial to Starkweather. Either one of those shops and you will have no issues at all tune or otherwise. Both use the best parts and have built many Zl1 set ups with over 700 rwhp on pump gas. Starkweather is also licensed rep for ADM.

03-04-2016, 06:54 PM	#1
evonschu Drives: Camaro ZL1 Join Date: Oct 2012 Location: Hillsboro, OR. Posts: 166 View My Garage	Engine Upgrade Shops in Portland, OR. area Looking to get some more in depth engine mods on my ZL1 (pulleys, injectors, headers, heat exchanger, and possibly a more aggressive cam). Wanted a shop local to Portland, OR. I've contacted a few but all are dragging their feet on getting me quotes, etc which doesn't make any sense to me. Anyone know of good, reputable shops in the area that could get these mods installed?

03-05-2016, 10:31 AM	#2
Nor Cal ZL1 Drives: 2013 ZL1 M6 Join Date: Oct 2013 Location: Nor Cal Posts: 1,825	Contact owhite3003 the originator of this linked thread. http://www.camaro5.com/forums/showthread.php?t=430179 He is from your area. He is probably going to recommend http://www.jdpmotorsports.com/ And https://starkweatherperformance.com/ He will set you straight on what direction to take. Best wishes for your build. The above are among the best of the best. If your doing a cam this is absolutely important to use a very reputable shop. I am partial to Starkweather. Either one of those shops and you will have no issues at all tune or otherwise. Both use the best parts and have built many Zl1 set ups with over 700 rwhp on pump gas. Starkweather is also licensed rep for ADM.