11-18-2011, 02:45 PM | #1 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
QuickTime bellhousing and new midplate pictures
Finally this package has been tested and is ready and I should have 3 units shortly. The bellhousing is a custom QuickTime SFI approved bellhousing and the midplate is made by Tremec. The pricing will be $3,995 INCLUDING the upgrades inside the transmission. The 9310 shafts are available as an option. I do have 2 Camaro TR6060 I can build from so you don't have to have any down time. Please let me know if anyone is interested. These should go pretty quick!
|
11-19-2011, 09:37 AM | #2 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
One unit has been sold. 2 units still avialable.
|
11-19-2011, 11:15 AM | #3 |
Boosted Moderator
|
Very nice looking... If my current mod attempts dont work out, I'll have to spend a chunk of change with you for a fully built one with the bellhousing and midplate... Staying tuned...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
11-24-2011, 12:47 PM | #4 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
|
11-24-2011, 02:13 PM | #5 |
i have one of the first ones...it was not made properly and i had to modify my shifter to make it fit. I was supposed to be sent one of these new ones. Any word on this?
__________________
85 Buick TType - 5.3l GT4202r 10.86 at 126
|
|
11-25-2011, 12:13 PM | #6 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
|
11-26-2011, 01:54 PM | #7 |
Banned
Drives: 2010 camrao Join Date: Sep 2011
Location: camaro5.com
Posts: 115
|
my tranny is already build by rpm transmissions. can i buy just the scatter shield?
if so, how much? |
11-26-2011, 02:05 PM | #8 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
You cannot use the bellhousing without the new front cover (midplate). The transmission has to be set up again since it will change the preload on the main and countershaft. Please call me for details.
|
11-29-2011, 01:54 PM | #9 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
Last one has been sold! I'll be getting another batch sometime in late January. Please PM me if you're interested getting one.
|
01-13-2012, 05:41 PM | #10 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
This is what it looks like when assembled without the bell. This one has the best of everything including the 9310 shaft with rear support bearing.
|
01-16-2012, 12:21 AM | #11 |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
Good shot of the rear support bearing.
|
04-12-2012, 08:01 PM | #12 | |
Quote:
-John |
||
04-12-2012, 08:07 PM | #13 | |
Drives: Corvette Join Date: Aug 2011
Location: Frederick
Posts: 101
|
Quote:
|
|
|
|
|
|