Massachusetts Shops for work etc

[closs2sx]

Originally Posted by Tomsusername

I actually just got some Pedders rear subframe inserts. They aren't as difficult as doing the full bushings, but still require the rear axle to be lowered. I understand that this might be 'too much' for a mod day, and the last thing I'd want to do is impose on other people. However, if it's ok to throw my car on the lyft, it'd definitely be helpful to have a group of guys present who share a knowledge of the 5th gen.

BUT because the job is a known PITA, it doesn't have to be done, and I'd still be happy to attend a mod day.

I have pulled the motor trans and driveshaft out of a 2011 bmw 328i xdrive by myself to replace the motor so I am sure with a couple people that should not be a problem

[Greenhornet2]

The inserts are quite easy. Just need a real nice big torque wrench to retorque those subframe bolts and something to support the subframe with. Who hosts this kinda stuff? I would have loved to have access to a list when i did my end lol.

[closs2sx]

Originally Posted by Greenhornet2

The inserts are quite easy. Just need a real nice big torque wrench to retorque those subframe bolts and something to support the subframe with. Who hosts this kinda stuff? I would have loved to have access to a list when i did my end lol.

got the torque wrench the lift and 2 under car supports

[Tomsusername]

Originally Posted by closs2sx

I have pulled the motor trans and driveshaft out of a 2011 bmw 328i xdrive by myself to replace the motor so I am sure with a couple people that should not be a problem

Originally Posted by Greenhornet2

The inserts are quite easy. Just need a real nice big torque wrench to retorque those subframe bolts and something to support the subframe with. Who hosts this kinda stuff? I would have loved to have access to a list when i did my end lol.

Originally Posted by closs2sx

got the torque wrench the lift and 2 under car supports

Thanks for the assurance! Also, closs2sx, I gotta commend you for pulling the driveline on an E90. That can't be easy.

I'm guessing you probably have most of the major tools that I have, but I too have a big @$$ torq wrench that should get the job done, along with an impact gun and impact sockets (if needed).

[closs2sx]

Originally Posted by Tomsusername

Thanks for the assurance! Also, closs2sx, I gotta commend you for pulling the driveline on an E90. That can't be easy.

I'm guessing you probably have most of the major tools that I have, but I too have a big @$$ torq wrench that should get the job done, along with an impact gun and impact sockets (if needed).

Have plenty of tools multiple air impacts multiple battery impacts even a miller 252 welder and a hypertherm plasma cutter and have multiple snap on torque wrenches including a 1/2 and 3/8 drive electronic ones that allow torque to angles.

[Happy_Dan]

Oh, he has the tools. I have enough for what you need and a lift too and I don't live in the middle of nowhere. Well actually I sort of do, but Brett needs to get here! He doesn't call, he doesn't write. Well ok, he does text.

Seriously, we can do this either place but I can tell you Brett knows what he is doing, is always helpful and a great guy. We should plan this day. We can stay apart enough and still get cars done.

Brett if you need an excuse, I have a bracket and a clutch reservoir so I can separate the clutch and brake fluid in my ZL1 and I need to bleed the brakes so I have something you can help with.

[closs2sx]

Dan you are definitely more central than I am. I am hurt Dan...lol. I do need to get down for a visit either way though. My place is an option as well though.

[Tomsusername]

Cool! No complaints from me about distance. My car is my daily, and I've been working from home since 3/2... I think I've filled the tank maybe 3 times. At this point, long drives are a welcome change.

[closs2sx]

let me know what works for you guys as long as I know a few days in advance I am down

[Happy_Dan]

We need to determine where and when.
I am pretty much free any day right now.
But I don't take my car out in bad weather.

[closs2sx]

I have to take time or I will lose it so I could do any day as well given enough notice and Dans place or mine is fine and like Dan I don't drive mine in bad weather but can drive my daily. If its rainy and we do it at my house I only have one lift available on a nice day I have 3 but 2 are 4 post so if you have to pull wheels off it can be done but not quick and easy.

[Happy_Dan]

Just an FYI - A simple brake bleed and flush on the 68 truck is turning into a project and my truck is on the lift right now. Hopefully not more than this weekend.

[Greenhornet2]

You guys still planning a workshop day? I don't have to do anything until my clutch decides to quit but i wouldn't mind helping, or drinking beer. My car also only goes out on nice days and i'm free on weekends.

[Happy_Dan]

I am in the process of bench bleeding the new master for 68 so hopefully it's off the lift in the next few days. After that, I am game for anything here.