06-23-2023, 10:22 PM | #1 |
Drives: 2010 Camaro SS Join Date: Dec 2006
Location: MN
Posts: 1,172
|
Front main seal leak - ATI balancer
So now discovered that my freshly built motor has a leak coming from the front main seal. I’ve got the ATI dampener I put on. Did I miss something and those need some special seal?? I was very careful to let the seal center itself before torquing down the front cover bolts. This even caused a bit of a step between the front cover and the block. But I did use RTV along with my oil pan gasket.
Not sure what went wrong here. Anyone else have this problem with the ATI balancer? |
06-24-2023, 02:48 PM | #2 |
Drives: 2013 ZL1 Join Date: Sep 2021
Location: Virginia
Posts: 301
|
Is it possible you installed the seal backwards? If not the seal is easy to damage and needs to be installed dry no grease/oil on inner seal surface, no sealer on outer surface. If anything the finish on the ATI balancer is better than factory.
|
06-24-2023, 06:40 PM | #3 |
Drives: 2010 Camaro SS Join Date: Dec 2006
Location: MN
Posts: 1,172
|
I definitely didn’t install it backwards. My 3rd LS build and I’ve never had any problems. I know they need to be installed dry too. I wonder if I somehow got some lubricant on there accidentally. It’s the only thing I can think of.
|
|
|
|
|