2013 Driver Seat Upholstery Issue - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mred2nice · 10-10-2018, 09:52 PM

Hello There

I have a permanent stain appearing issue with my driver's seat(part you sit on). I had it cleaned and it didn't come out. Further inspection, it appears it is burned/melted.

Is it even possible to have it re-upholstered? Or am I better off buying a new seat? If so, what is the going rate and do you have suggestions on where I can find one?

Thanks,
Ed

db59 · 10-14-2018, 08:53 PM

You can just buy a new seat cover from GM, #23161545. Multiple sites online or from you local Chevy dealer. If you can't install it find a good upholstery shop near you to do it.

VRZL113 · 10-16-2018, 11:26 AM

subd

GONMAD510 · 10-17-2018, 08:52 AM

This is good to know. The lower bolster is starting to look worn on mine from getting in and out of the car

mred2nice · 10-22-2018, 07:28 PM

Thanks for the help on the part number.

swampcritter · 10-23-2018, 04:52 AM

Quote:

Originally Posted by mred2nice

Hello There

I have a permanent stain appearing issue with my driver's seat(part you sit on). I had it cleaned and it didn't come out. Further inspection, it appears it is burned/melted.

Is it even possible to have it re-upholstered? Or am I better off buying a new seat? If so, what is the going rate and do you have suggestions on where I can find one?

Thanks,
Ed

I have to replace my drivers side also,for the same reason.I got an estimate of @50$ if I pull the seat.

VRZL113 · 10-23-2018, 06:13 AM

I just ordered a drivers side seat bottom cover for my ZL1. My seat has two tiny holes in the suede that were repaired by the original owner... Started bothering me, even though they aren't that noticeable. The correct part# per my vin# is 23161532 just an FYI for those ordering for their ZL1.

el ess A · 11-06-2018, 06:49 AM

These are per my VIN supplied request to gmpartsdirect. I got this back as far as front seat covers. NOTE: My car is a convertible. I do not know if the seats are different, but apparently the driver seat bottom is the same, so.....but you should verify to be sure.

Quote:

23161566 Driver sear back cover; black in color (suede trim)

23161532 Driver seat cushion cover; black in color (suede trim)

23162177 Passenger seat back cover; black in color (suede trim)

23162138 Passenger seat cushion cover; black in color (suede trim)

1Willy1 · 11-09-2018, 08:50 PM

how does the suede inserts age compared to leather?

Are they holding up well so far in most peoples case ?

VRZL113 · 11-20-2018, 11:54 AM

Quote:

Originally Posted by 1Willy1

how does the suede inserts age compared to leather?

Are they holding up well so far in most peoples case ?

I know I responded to this (not sure where my post went)....

The suede holds up great, as long as you maintain it. I use my Adam's cockpit brush on my seats, and steering wheel about once a week to prevent matting.

The steering wheel, and shift knob (with suede package), see extra wear from the abrasive contact with your skin on a daily basis. Keep that in mind.

10-10-2018, 09:52 PM	#1
mred2nice Drives: 2013 Camaro ZL1 & 1979 10.5 Camaro Join Date: Jul 2016 Location: North Olmsted Posts: 110	2013 Driver Seat Upholstery Issue Hello There I have a permanent stain appearing issue with my driver's seat(part you sit on). I had it cleaned and it didn't come out. Further inspection, it appears it is burned/melted. Is it even possible to have it re-upholstered? Or am I better off buying a new seat? If so, what is the going rate and do you have suggestions on where I can find one? Thanks, Ed

10-16-2018, 11:26 AM	#3
VRZL113 Drives: 2013 VR ZL1, M6 Join Date: Nov 2017 Location: PA Posts: 335	subd __________________ #3257 \| 485whp 526wtq \| K&N 63-3079 \| Gates K080660HD (Green Belt) \| ACDelco UPF48R \| ZL1 Addons Wicker Bill \| Mild2Wild

10-17-2018, 08:52 AM	#4
GONMAD510 Drives: 2013 ZL1 M6 Join Date: Sep 2016 Location: CA Bay Area Posts: 248	This is good to know. The lower bolster is starting to look worn on mine from getting in and out of the car __________________ Fast 850cc Injectors, ATI Balancer, 8.66 Lower Pulley, 2.55 Upper Pulley, Lingenfelter CAI, Kooks LT with cat delete pipes, Noweeds Exhaust Cutouts (extremely loud under full throttle), BTR Stage 3 Cam, BTR Platinum 660 Valve Spring Kit, TR7ix Iridium Spark Plugs, Lingenfelter Solid Isolator, 160 Degree Thermostat, Larger SC Coolant Reservoir with Hose Relocation Kit, BMR 1.25" Lowering Springs, MGW Short Throw Shifter, Racing Brake 2 piece rotors front and rear, Starkweather Performance Custom Dyno Tune on 91 Octane. 691.38 RWHP 630.35 RWTQ

10-23-2018, 06:13 AM	#7
VRZL113 Drives: 2013 VR ZL1, M6 Join Date: Nov 2017 Location: PA Posts: 335	I just ordered a drivers side seat bottom cover for my ZL1. My seat has two tiny holes in the suede that were repaired by the original owner... Started bothering me, even though they aren't that noticeable. The correct part# per my vin# is 23161532 just an FYI for those ordering for their ZL1. __________________ #3257 \| 485whp 526wtq \| K&N 63-3079 \| Gates K080660HD (Green Belt) \| ACDelco UPF48R \| ZL1 Addons Wicker Bill \| Mild2Wild Last edited by VRZL113; 10-23-2018 at 11:27 AM.

10-14-2018, 08:53 PM	#2
db59 Drives: 15 ZL1, 61 Vette, 32 Ford Roadster Join Date: Jun 2014 Location: Washington Posts: 24	You can just buy a new seat cover from GM, #23161545. Multiple sites online or from you local Chevy dealer. If you can't install it find a good upholstery shop near you to do it.

10-22-2018, 07:28 PM	#5
mred2nice Drives: 2013 Camaro ZL1 & 1979 10.5 Camaro Join Date: Jul 2016 Location: North Olmsted Posts: 110	Thanks for the help on the part number.

11-09-2018, 08:50 PM	#9
1Willy1 Drives: corvette z06 Join Date: Feb 2018 Location: toronto Posts: 97	how does the suede inserts age compared to leather? Are they holding up well so far in most peoples case ?