What are you V6 supercharger folks doing for clutches? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rmaringa · 04-17-2013, 10:38 PM

I can't imagine the stock clutch is holding up to the extra abuse?

JohnnyBfromPeoria · 04-17-2013, 10:43 PM

Mine's fine...so far.

John B.

Vader2011v6 · 04-17-2013, 11:57 PM

Still stock and it feels good

Lil' Nasty · 04-18-2013, 12:15 AM

Ask sycraft, he's getting one.

lscamaro · 04-18-2013, 12:26 AM

I know sixjak has an upgraded one.

sycraft · 04-18-2013, 06:18 AM

I just recieved my 9.5 inch twin disc with billett flywheel, pics soon. Getting installed soon too, along with Ideal G master and remote resovoir from JDP. I have the first production unit from RAM and will be doing some testing on it before it is made available to the masses. Either GMHT or Camaro Now may be doing an article on it as well so I have to be cautious of what I can post until we get this done. I will at least try to get a photo ot later, travelling now, All I can say is thats its clutch porn, too bad its all hidden once installed.

Nutbutt · 04-18-2013, 08:40 AM

Still on the oem clutch. No issues but I have not really pushed it on a track yet. It's all going to depend on how much you are going to push the limits. I have seen V8 clutches being up grade from oem when pushed due to limits on the track. From what I have seen of the V6 clutch it actually is better than most oem's I have seen and replaced.

Can't_C_Me · 04-18-2013, 10:30 AM

Stock clutch after a year of being boosted still good for now. All my races are from a roll so not really killing the clutch to back. BUt getting a replacement soon anyway.

hunterv6 · 04-18-2013, 10:53 AM

havent drove mine in a while but the clutch is shot it just depends on your driving style. but i have the replace and flywheel ready to go in.

IPF-Tuning · 04-19-2013, 03:32 PM

We can build you a custom race clutch. I have 3 of them out there kickin ass on the street and track! Let me know if you want one.

Thanks,

Jesse!

IPF-Tuning · 04-19-2013, 03:33 PM

LS, we did Six's when it was here at IPF.

Thanks,

Jesse!

rmaringa · 04-19-2013, 08:56 PM

^^^How do your clutches compare to these guys?

http://w.ivenue.com/hendrixengineeri...-clutches.html

lscamaro · 04-19-2013, 09:11 PM

Quote:

Originally Posted by rmaringa

^^^How do your clutches compare to these guys?

http://w.ivenue.com/hendrixengineeri...-clutches.html

Hendrix doesn't make one for the v6

sycraft · 04-19-2013, 09:13 PM

I have the RAM prototype, it is a 9.5 inch dual disk unit with some cool features, GMHT is covering install, not sure what I can post yet.

04-17-2013, 10:38 PM	#1
rmaringa Drives: 2012 Black Camaro Join Date: Apr 2013 Location: Florida Posts: 27	What are you V6 supercharger folks doing for clutches? I can't imagine the stock clutch is holding up to the extra abuse?

04-17-2013, 10:43 PM	#2
JohnnyBfromPeoria Drives: 2012 LS M6, Black Join Date: May 2009 Location: Phoenix, AZ Posts: 2,045	Mine's fine...so far. John B. __________________ 12 LS M6, IPF S/C, ASA GT-5 wheels, VMax PTB 1995 Mitsubishi Montero SR 1987 Dodge Raider Turbo Project 1986 Mitsubishi Montero 2.4l FI Transplant

04-17-2013, 11:57 PM	#3
Vader2011v6 Drives: 2014 custom blue ZL1 Join Date: Jun 2011 Location: Sacramento Posts: 1,246	Still stock and it feels good __________________ Custom blue 2014 ZL1. Cold air intake,clear bra,apex springs,apex oil catchcan,18 percent pulley,stainless works long tubes wit high flow cats,ls3 throttle body, (595tq/607hp) to the wheels

04-18-2013, 12:15 AM	#4
Lil' Nasty [COTW 4/13/15] Drives: Supercharged LLT Join Date: Jul 2010 Location: Florida Posts: 5,957	Ask sycraft, he's getting one. __________________ LiL' Nasty's Build Journal

04-18-2013, 12:26 AM	#5
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	I know sixjak has an upgraded one. __________________ Click Picture for Build Thread

04-18-2013, 06:18 AM	#6
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	I just recieved my 9.5 inch twin disc with billett flywheel, pics soon. Getting installed soon too, along with Ideal G master and remote resovoir from JDP. I have the first production unit from RAM and will be doing some testing on it before it is made available to the masses. Either GMHT or Camaro Now may be doing an article on it as well so I have to be cautious of what I can post until we get this done. I will at least try to get a photo ot later, travelling now, All I can say is thats its clutch porn, too bad its all hidden once installed. __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

04-18-2013, 08:40 AM	#7
Nutbutt Drives: 2011 RJT 2LT/RS Convertible Join Date: Nov 2009 Location: Western Massachusetts Posts: 3,381 View My Garage	Still on the oem clutch. No issues but I have not really pushed it on a track yet. It's all going to depend on how much you are going to push the limits. I have seen V8 clutches being up grade from oem when pushed due to limits on the track. From what I have seen of the V6 clutch it actually is better than most oem's I have seen and replaced. __________________ 1st IPF Supercharged 2011 2LT/RS RJT Convertible

04-18-2013, 10:30 AM	#8
Can't_C_Me Don't Sleep on My V6 Drives: 2016 C7 1LT Join Date: Dec 2010 Location: Oxford, GA Posts: 3,596 View My Garage	Stock clutch after a year of being boosted still good for now. All my races are from a roll so not really killing the clutch to back. BUt getting a replacement soon anyway. __________________

04-18-2013, 10:53 AM	#9
hunterv6 Always bet on Black Drives: 2011 turbo LS, 2012 f 150, Join Date: Nov 2010 Location: Concord Nc Posts: 1,983	havent drove mine in a while but the clutch is shot it just depends on your driving style. but i have the replace and flywheel ready to go in. __________________

04-19-2013, 03:32 PM	#10
IPF-Tuning Drives: Camaro, CTS-V, Escalade, GMC Sierra Join Date: Nov 2011 Location: Scottsdale, AZ Posts: 577	We can build you a custom race clutch. I have 3 of them out there kickin ass on the street and track! Let me know if you want one. Thanks, Jesse!

04-19-2013, 03:33 PM	#11
IPF-Tuning Drives: Camaro, CTS-V, Escalade, GMC Sierra Join Date: Nov 2011 Location: Scottsdale, AZ Posts: 577	LS, we did Six's when it was here at IPF. Thanks, Jesse!

04-19-2013, 08:56 PM	#12
rmaringa Drives: 2012 Black Camaro Join Date: Apr 2013 Location: Florida Posts: 27	^^^How do your clutches compare to these guys? http://w.ivenue.com/hendrixengineeri...-clutches.html

04-19-2013, 09:13 PM	#14
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	I have the RAM prototype, it is a 9.5 inch dual disk unit with some cool features, GMHT is covering install, not sure what I can post yet. __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said