Looking For Z28 Resurrection Parts

[Blownfogger540]

like the title says

shipping would be to 98230 WA business

car is 2015
i hoping to find all in U 130X color painted already lol ya i know
need both front fenders
hood
front fascia
rear fascia
bumper supports front and rear
bumper energy absorber front and rear
rad support and other from front to firewall

[chip4]

Just curious:
What is the VIN of the car?
Is this going to be your personal vehicle?
History and location of the vehicle?

We are a small group of enthusiasts/owners in this forum trying keep track of this special limited production vehicles.

[Blownfogger540]

not really what i was looking for

[joelster]

All of the parts you need are the same as on all 5th gen SS's. You might want to post up in the classified section on the forum. If you need a Z/28 specific part then post in here.

[j o n]

Originally Posted by joelster

All of the parts you need are the same as on all 5th gen SS's. You might want to post up in the classified section on the forum. If you need a Z/28 specific part then post in here.

Fenders and bumer are specific to z/28 due to clips for flares. Grill is z/28 specific too.

Hood would need to be 2014/2015 SS at least

OP, ebay has some take off z/28 parts like the flares I see from time to time

[96SS390]

Originally Posted by j o n

Fenders and bumer are specific to z/28 due to clips for flares. Grill is z/28 specific too.

Hood would need to be 2014/2015 SS at least

OP, ebay has some take off z/28 parts like the flares I see from time to time

I would think at the point the one was doing a reconstruction title of such a limited production vehicle there might be limitations to the extent of which "one" tries to use model specific pieces. If the only issue is the "clips" for the fender/bumper relative to the flares on an R-Title vehicle I would probably forgo as I am sure the is another solution to fit the flare on a standard bumper/fender even if that means recreating a similar clip or finding another ingenuitive way to mount them.

I say this as waiting around for another wrecked Z/28 and the chances of finding a salvageable fender that maintains these clips intact is probably some pretty low probabilities and to have the car finished in any reasonable time frame may not make sense. I did a reconstruction title on a 1996 Camaro SS (i.e. similar production numbers I think?) and to find an OEM hood and a single ZR1 wheel took well over a year and I think their part out rate is probably higher due to the lower sale prices of the LTSS car's back in the day.

Also very substantial side conversation but you didn't happen to be driving through Murrysville on Sunday October 7th? I saw a white Z/28 on 22.

[2SSRS@Gen5diy]

Originally Posted by j o n

Bumper are specific to z/28 due to clips for flares. Grill is z/28 specific too.

Hood would need to be 2014/2015 SS at least

OP, ebay has some take off z/28 parts like the flares I see from time to time

The Fenders are the same, the bumper has extra holes in it for the flares and clips but if you had to can make it work.

[Blownfogger540]

Originally Posted by j o n

Fenders and bumer are specific to z/28 due to clips for flares. Grill is z/28 specific too.

Hood would need to be 2014/2015 SS at least

OP, ebay has some take off z/28 parts like the flares I see from time to time

yes thank you ive got what i could from ebay

[j o n]

Originally Posted by 96SS390

Also very substantial side conversation but you didn't happen to be driving through Murrysville on Sunday October 7th? I saw a white Z/28 on 22.

Indeed was me

[Blownfogger540]

Originally Posted by 96SS390

I would think at the point the one was doing a reconstruction title of such a limited production vehicle there might be limitations to the extent of which "one" tries to use model specific pieces. If the only issue is the "clips" for the fender/bumper relative to the flares on an R-Title vehicle I would probably forgo as I am sure the is another solution to fit the flare on a standard bumper/fender even if that means recreating a similar clip or finding another ingenuitive way to mount them.

I say this as waiting around for another wrecked Z/28 and the chances of finding a salvageable fender that maintains these clips intact is probably some pretty low probabilities and to have the car finished in any reasonable time frame may not make sense. I did a reconstruction title on a 1996 Camaro SS (i.e. similar production numbers I think?) and to find an OEM hood and a single ZR1 wheel took well over a year and I think their part out rate is probably higher due to the lower sale prices of the LTSS car's back in the day.

Also very substantial side conversation but you didn't happen to be driving through Murrysville on Sunday October 7th? I saw a white Z/28 on 22.

nope not me, are you here visiting

[1badchicken]

I have an OEM Summit White Z28 front bumper cover.

[Blownfogger540]

Originally Posted by 1badchicken

I have an OEM Summit White Z28 front bumper cover.

what shape is it in

[Blownfogger540]

added parts needed

[chip4]

Originally Posted by Blownfogger540

not really what i was looking for

You sound like a one of those flippers.