07-21-2018, 09:30 PM | #1 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
adm solid cradle bushings, toe rods, trailing arms and more
sold
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
Last edited by ttshovel; 08-07-2018 at 07:39 PM. |
07-21-2018, 11:07 PM | #2 |
@LS.ACE
Drives: 2014 Chevy Camaro 2SS/1LE Join Date: Jan 2017
Location: North Jersey
Posts: 296
|
if you decide to split up the suspension I will buy the non adjustable trailing arms. I would buy the upper control arm mounts too, but they are red. I want it to look as stockish as possible back there.
If you are willing to do it, just pm me and send me some pictures so I know what they look like and what condition they are in. It's easier for me to see when someone PMs me while im working since it goes to my e-mail. PayPal ready.
__________________
Some weird snail with a belt on it | Tial Q Bov | CCP Jam Cam | Stainless Works 1 7/8" Headers to Custom 3" Exhaust | Alky Control Dual Nozzle| ProMeth Trunk Mount Tank | Melling Oil Pump | DSX Aux Pump | id1050x Injectors | McLeod RXT w/ Monster Billet Release Bearing | ZL1 3.73 Rear Diff | BMR Delrin/Poly Diff Bushings | DSS 1-Piece Aluminum Driveshaft | ZL1 Axles | Metco Driveshaft Loop | BMR Adjustable LCA's, TA's, Toe Rods | BMR Adjustable Sway Bar w/ Fe3 End Links | Mickey Thompson 305/35-20 Street S/S Drag Radials |
|
07-27-2018, 06:26 PM | #3 |
Drives: 2010 SS Camaro Join Date: Jul 2018
Location: Mississippi
Posts: 128
|
if U want to sell Just the adm solid cradle bushings - let me know, Thanks
|
08-02-2018, 10:56 PM | #4 |
Drives: 2015 Camaro 2SS Green Flash Edition Join Date: Dec 2015
Location: NW Arkansas
Posts: 200
|
Pm sent
__________________
Kooks stepped headers & Solo XL Cat-back
ADM CAI w/race scoop & Rotofab w/w relo GPI VVT SS1 cam and CNC ported heads milled .30 BTR .660 springs, Straub solid bushing trunions GPI rod-mod intake with I-M heat sheild Circle D 258mm Pro single disc 3700 rpm stall converter 169F thermostat & manual fan switch Tuned by Ryno at GPI - 455 RWHP / 416 lb-ft |
08-07-2018, 07:39 PM | #5 |
Drives: 2014 2SS Join Date: Dec 2017
Location: Mo
Posts: 166
|
payment sent.
|
|
|
|
|