2010 SS PRO STREET/PRO TOURING BACK HALF - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Badaz ss · 10-26-2017, 09:22 AM

Quote:

Originally Posted by Badaz ss

Yes I would tend to agree with you there. Like I said its the old school look and it really turns heads at the car shows. Of course you could run any size tire at the strip and that is where the 4 link wishbone anti-roll and that 9" Ford 35 spline would shine big time.

All that and you don't need to worry about hauling passengers in the rear seat.

10aSSee D · 10-30-2017, 07:57 PM

What did it cost to back half that car? Who did the work? Sorry if it has already been answered and I'm not trying to take away from your thread either just curious.

Badaz ss · 10-31-2017, 07:31 AM

No problem in asking. Advanced Chassis did the back half tube frame 4 link 9" Ford, fab work, tunnel, roll bar, exhaust, fuel cell, etc. They came highly recommended by the guys at Lingenfelter. Then the car went back to Lingefelter to work out the new fuel system and any faults created. Cost for the back half alone without wheels, tires, interior and working out faults:$20,000 but its done right. The complete job around $25,000. I will post a few build photos soon.

Badaz ss · 10-31-2017, 07:59 AM

Quote:

Originally Posted by Badaz ss

No problem in asking. Advanced Chassis did the back half tube frame 4 link 9" Ford, fab work, tunnel, roll bar, exhaust, fuel cell, etc. They came highly recommended by the guys at Lingenfelter. Then the car went back to Lingefelter to work out the new fuel system and any faults created. Cost for the back half alone without wheels, tires, interior and working out faults:$20,000 but its done right. The complete job around $25,000. I will post a few build photos soon.

By the way my complements on your car, nice ride!

Badaz ss · 10-31-2017, 08:25 AM

Posting a few build photos.

Badaz ss · 10-31-2017, 09:00 AM

A few more photos near the end of build.

10aSSee D · 10-31-2017, 11:07 AM

Thanks for the info and the compliment on my car. I've been wanting to do a back half on my car and yours has been right. Beautiful job on your ride, hate to see you get rid of it.

Badaz ss · 10-31-2017, 04:02 PM

Thanks, if i can be of any assistance to you on doing the back half feel free to contact me.

Taylortoons · 10-31-2017, 04:38 PM

That's some serious fab work. Lots of triangles. Well done!

Badaz ss · 10-31-2017, 06:01 PM

Thanks for the compliment! I'll bet you like that 3.91 gear.

10aSSee D · 11-01-2017, 07:29 AM

Quote:

Originally Posted by Badaz ss

Thanks, if i can be of any assistance to you on doing the back half feel free to contact me.

Thank you. My dad just bought a 72 nova that is mini tubbed and I showed him your car and he said when we get finished building my garage we should buy your car lol. I would love to have yours, I want the exact setup you have on the back half. Absolutely love your car.

Badaz ss · 11-01-2017, 10:21 AM

Quote:

Originally Posted by 10aSSee D

Thank you. My dad just bought a 72 nova that is mini tubbed and I showed him your car and he said when we get finished building my garage we should buy your car lol. I would love to have yours, I want the exact setup you have on the back half. Absolutely love your car.

Thanks for the compliment and good luck with the garage.

Badaz ss · 11-08-2017, 06:51 PM

Reducing Price $69,900

10-30-2017, 07:57 PM	#16
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	What did it cost to back half that car? Who did the work? Sorry if it has already been answered and I'm not trying to take away from your thread either just curious. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

10-31-2017, 08:25 AM	#19
Badaz ss Drives: 2010SS red jewel w/silver stripes Join Date: May 2011 Location: Columbia City, In Posts: 50 View My Garage	Posting a few build photos. Attached Images

10-31-2017, 09:00 AM	#20
Badaz ss Drives: 2010SS red jewel w/silver stripes Join Date: May 2011 Location: Columbia City, In Posts: 50 View My Garage	A few more photos near the end of build. Attached Images

10-31-2017, 11:07 AM	#21
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Thanks for the info and the compliment on my car. I've been wanting to do a back half on my car and yours has been right. Beautiful job on your ride, hate to see you get rid of it. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

10-31-2017, 04:38 PM	#23
Taylortoons Drives: 2011 2SS/RS LS3 Join Date: Apr 2017 Location: Dallas Posts: 482	That's some serious fab work. Lots of triangles. Well done! __________________ GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD

10-31-2017, 07:31 AM	#17
Badaz ss Drives: 2010SS red jewel w/silver stripes Join Date: May 2011 Location: Columbia City, In Posts: 50 View My Garage	No problem in asking. Advanced Chassis did the back half tube frame 4 link 9" Ford, fab work, tunnel, roll bar, exhaust, fuel cell, etc. They came highly recommended by the guys at Lingenfelter. Then the car went back to Lingefelter to work out the new fuel system and any faults created. Cost for the back half alone without wheels, tires, interior and working out faults:$20,000 but its done right. The complete job around $25,000. I will post a few build photos soon.

10-31-2017, 04:02 PM	#22
Badaz ss Drives: 2010SS red jewel w/silver stripes Join Date: May 2011 Location: Columbia City, In Posts: 50 View My Garage	Thanks, if i can be of any assistance to you on doing the back half feel free to contact me.

10-31-2017, 06:01 PM	#24
Badaz ss Drives: 2010SS red jewel w/silver stripes Join Date: May 2011 Location: Columbia City, In Posts: 50 View My Garage	Thanks for the compliment! I'll bet you like that 3.91 gear.

11-08-2017, 06:51 PM	#27
Badaz ss Drives: 2010SS red jewel w/silver stripes Join Date: May 2011 Location: Columbia City, In Posts: 50 View My Garage	Reducing Price $69,900