02-02-2014, 11:04 AM | #1 |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: Dubai
Posts: 757
|
Dyno Graph
Hope this is clear enough:
Im not a fan of dynos due to the discrepancies associated with different dynos, different days, different correction factors and gimmicks that shop owners play on readings yet I decided to give it a shot. This was done on a 4wd Dynojet. The car made 2 less PSI on the dyno for 20psi max vs 22psi on the street, inlet air temps were noticeably hotter in the dyno room, and there was no ventilation for the exhausts so all the exhaust gases were prossibly recirculating to the front of the car. This is on straight 93 octane and no meth, no cooldown no bullshit. Made 850rwtq on the second back to back pull but a few less HP so I took a printout of this graph. 1000rwhp on the street no joke. and look at how long it carries peak torque Exhaust ventilation plus were gonna put the 1LE on the dyno next week to see what it does for the hell of it.
__________________
1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1 |
02-02-2014, 11:21 AM | #2 |
Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010
Location: Alberta
Posts: 1,408
|
Very impressive. Mylftft and your car are the best two builds to date in my mind.
The only numbers bigger than that are on the license plates. |
02-02-2014, 11:44 AM | #3 |
Drives: 2010 2SS/RS Join Date: Sep 2011
Location: Mn
Posts: 481
|
nicely done! congrats! and enjoy that beast!
|
02-02-2014, 12:26 PM | #4 |
Drives: 2013 ZL1 Camaro 2000 SLP Camaro Join Date: Oct 2012
Location: Ruther Glen, VA
Posts: 357
|
Nice.
|
02-02-2014, 01:01 PM | #5 |
|
Post some vids of the pull. I want to hear that thing roar !
__________________
Laus Deo
|
02-02-2014, 02:12 PM | #6 |
709 RWHP & 677 RWTQ
Drives: 13' HPE 800 ZL1..... IOM vert, M6 Join Date: Feb 2013
Location: South Windsor, CT
Posts: 1,140
|
WOW, now thats a monster!
__________________
11.34 @ 124.88
|
02-02-2014, 04:17 PM | #7 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Nice, the power band is always very linear with whipples and they seem like they can keep on climbing. You gain almost 50 hp above 6000rpm.... wow.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
02-03-2014, 08:49 AM | #8 | |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: Dubai
Posts: 757
|
Quote:
too bad it goes through the 4th gear pull so quickly it cant manage to squeeze out the last 2 psi that I usually see on the street.
__________________
1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1 Last edited by ayousef; 02-03-2014 at 02:29 PM. |
|
02-03-2014, 10:55 AM | #9 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Congrats, Awesome!
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
02-03-2014, 11:22 AM | #10 |
Drives: 2013 ZL1, 2016 Denali HD Join Date: Jun 2013
Location: Greensboro Ga.
Posts: 540
|
WOW ! Very impressive numbers.....
__________________
LSX 427, Twin Precision Turbo's, 64/66. Nitrous Outlet System. Pro EFI Engine Management Systems. Vengeance Racing Built......
|
02-03-2014, 07:05 PM | #11 |
Drives: 2013 ZL1 Join Date: Jul 2012
Location: upstate New York
Posts: 166
|
Very impressive numbers! That's got to be an animal on the streets.
__________________
2013 ZL1 AGM, ECF, A6, sunroof, black rims
mods complete! 664 RWHP, 645 RWTQ Ported snout, 2.5 upper, Innovators west balancer with 9.1 lower, New era intake, American Racing long tube headers with hollow cats and X pipe, KDI heat exchanger, ID850's, TS29 cam ! |
02-04-2014, 06:30 AM | #12 |
Drives: 2019 GT350 Join Date: Jan 2011
Location: NC
Posts: 3,232
|
Very impressive numbers, now lets see some videos of these cars racing and using this newfound power
__________________
2019 GT350 RR
2013 Boss Mustang 2012 SRT Challenger 392 auto 12:40s 112 stock 2012 Ford Mustang 5.0. Brembo, 3:73s 2010 SS, LS3, Cammed, LTs, 12:20s 2004 Redfire Cobra, Pullied & Tuned 1986 GT, Ed Curtis 347ci, 11:20s motor. 10:30s 100-hp shot |
02-04-2014, 08:22 AM | #13 |
I Carry!
Drives: 2013 CRT ZL1 Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
|
SWEET JESUS, that's insane! Congrats!
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/ |
|
|
|
|