Anyone happen to have a set/extra set of ZL1addons deluxe (long) rock guards?

[HoodCheck]

I picked up another Z/28 (2014 build 428), however zl1 addons now only has the short deluxe rock guards. I went ahead and ordered a set since something is better than nothing, but they just look off since they don't match the front wheel flare extension length wise.

If anyone has a decent used set, or an extra new set laying around, of the long rock guards, I would be happy to buy them from you for above what you paid.

[HoodCheck]

<fingers crossed>

[SIM GhostrdrZ]

I have to say I was disappointed in how they didn’t match up to the z28 so I produced my own set from plastic sheeting, textured towards wheel and gloss towards side skirt. It comes out further to protect the side skirt and better protection with wider wheels. Not many folks will put the time into producing their own but if your so inclined it is possible to produce a better product, at least for our Z28’s.

[HoodCheck]

Originally Posted by SIM GhostrdrZ

I have to say I was disappointed in how they didn’t match up to the z28 so I produced my own set from plastic sheeting, textured towards wheel and gloss towards side skirt. It comes out further to protect the side skirt and better protection with wider wheels. Not many folks will put the time into producing their own but if your so inclined it is possible to produce a better product, at least for our Z28’s.

If I had the knowledge or time, I would give it a shot. However in lacking both, I suspect I'd just get pissed off trying lol.

[2SSRS@Gen5diy]

Originally Posted by HoodCheck

I picked up another Z/28 (2014 build 428), however zl1 addons now only has the short deluxe rock guards. I went ahead and ordered a set since something is better than nothing, but they just look off since they don't match the front wheel flare extension length wise.

If anyone has a decent used set, or an extra new set laying around, of the long rock guards, I would be happy to buy them from you for above what you paid.

You need to call me, i may have a set or more here.

[HoodCheck]

Originally Posted by 2SSRS@Gen5diy

You need to call me, i may have a set or more here.

Is this Ofer?

[2SSRS@Gen5diy]

Originally Posted by HoodCheck

Is this Ofer?

Yes still me.

[Palutz]

Long rock guards are back in stock at ZL1addons

[HoodCheck]

Originally Posted by Palutz

Long rock guards are back in stock at ZL1addons

Yep I got the email this morning and promptly bought 2 sets (in case I get another Z in the future)...now I literally have 4 spare sets of rock guards, and a long prototype (non-deluxe) version as well lol.

[Palutz]

Originally Posted by HoodCheck

Yep I got the email this morning and promptly bought 2 sets (in case I get another Z in the future)...now I literally have 4 spare sets of rock guards, and a long prototype (non-deluxe) version as well lol.

Do you know if these are the newer style with clips and 3m tape and no drilling required?

[HoodCheck]

Originally Posted by Palutz

Do you know if these are the newer style with clips and 3m tape and no drilling required?

No idea. I didn't know there were any with clips; my last set had to have a hole drilled. That being said, I'll still drill the hole if they do come with clips. I trust a screw much more than clips and tape.

[Palutz]

Originally Posted by HoodCheck

No idea. I didn't know there were any with clips; my last set had to have a hole drilled. That being said, I'll still drill the hole if they do come with clips. I trust a screw much more than clips and tape.

I saw a video on YouTube from Lethal Garage and he was putting some deluxe long rock guards on a 6th gen Camaro. He mentioned that the old style required drilling but the new style used a factory bolt plus 2 clips and 3m tape.

[HoodCheck]

Originally Posted by Palutz

I saw a video on YouTube from Lethal Garage and he was putting some deluxe long rock guards on a 6th gen Camaro. He mentioned that the old style required drilling but the new style used a factory bolt plus 2 clips and 3m tape.

Ahhh, I gotcha...the 6th gen ones are different than the Z/28 version. I had them on my 2016 2SS and my 2017 ZL1. That doesn't mean they didn't change to the clip style now though for the Z/28 either of course. Will reply back to this thread when I get mine in to let you know

[Palutz]

Originally Posted by HoodCheck

Ahhh, I gotcha...the 6th gen ones are different than the Z/28 version. I had them on my 2016 2SS and my 2017 ZL1. That doesn't mean they didn't change to the clip style now though for the Z/28 either of course. Will reply back to this thread when I get mine in to let you know

Thanks ... I ordered a set as well cuz I don’t want my ceramic coating to get destroyed.