hatch pull down motor parts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GRASSHOPPER · 05-04-2011, 07:05 AM

does anybody know if i can still get the little plastic slides for the hatch pull down motor for my 87 iroc, my dealer is having problems figuring it out for me
thanks, mike

drknow90rs · 05-04-2011, 10:17 PM

There are a few companies that reproduce them. www.topdownsolutions.com is one of them. They are really good guys there and probably make the best parts for that.

Nexus6 · 05-04-2011, 10:25 PM

This brings back nightmares.

GRASSHOPPER · 05-05-2011, 07:00 AM

i clicked on the link and a 'woman coupon ' site comes up, so i closed and tried again and some other site comes up about travel plans or something. is there a trick to opening the link or i am just missing something, thanks
mike

GRASSHOPPER · 05-06-2011, 07:00 AM

i figure there is lots of guys out there looking for these parts and i was able to find the site. so here is the link for future reference
http://www.top-downsolutions.com/
this link works, i ordered my parts last night
thanks

drknow90rs · 05-06-2011, 11:10 PM

OOppsss! I forgot the hyphen! (-) Glad you got it figured out! The owner is a really knowledgable guy and owns a thirdgen himself.

2ndgenz28 · 05-12-2011, 07:21 PM

TDS: To many grumbles around door pin kits, sent me in circles when I wanted some Alston SFC. Glad I wised up and save a good $40 not using him. On top of he charges you extra for the bolt kit that comes free with them. [ they are both bolt and weld in's]

Got my Alston SFC from dough herbert racing, dropped shipped right from Alston to me, was even cheaper then Alston sells them.

drknow90rs · 05-12-2011, 10:29 PM

I love their door pin kits. (Got one on the '86 IROC and the '90 RS. As far as I know, theirs is the only adjustable set on the market.) I wouldnt buy SFC's there, but I also wouldnt buy a hamburger from an ice cream shop! (LOL, sorry Dairy Queen....)

2ndgenz28 · 05-13-2011, 12:18 AM

Quote:

Originally Posted by drknow90rs

(LOL, sorry Dairy Queen....)

hated that place every since I was little, put them free sunday coupons on cereal boxes and when you finally get to one [stores spread thin] they give you a teaspon of icecream and charge you tax.

They can sit n spin...............

Allot didn't like the door pin kits as it wasn't complete or clear, I meber the big uproar over it. Like him taking the free bolts out of the boxes if you don't pay an extra $5-10. His excuess is some folks are just going to weld them in.
Ok keep them, but don't charge someone more for stolen bolts.

drknow90rs · 05-14-2011, 12:48 AM

LOL, I remember hearing about that on TGO... (about the bolts.) I always hated Dairy queen too...

05-04-2011, 07:05 AM	#1
GRASSHOPPER Drives: 1987 z28 Join Date: Jan 2011 Location: callander, ontario, can Posts: 49 View My Garage	hatch pull down motor parts does anybody know if i can still get the little plastic slides for the hatch pull down motor for my 87 iroc, my dealer is having problems figuring it out for me thanks, mike

05-04-2011, 10:25 PM	#3
Nexus6 More human than human Drives: 2010 IOM 2SS/RS Join Date: May 2008 Location: The mouth of hell Posts: 1,887 View My Garage	This brings back nightmares. __________________ 1100 - 10/22/2008 3000 - 05/27/2009 3300 - 06/06/2009 3800 - 06/29/2009 4B00 - 06/29/2009 Warehouse 13 survivor Blood stains,speed kills,fast cars,cheap thrills,rich women,fine wine,i lost my sense i lost control i lost my mind.

05-12-2011, 07:21 PM	#7
2ndgenz28 Thread Killer Drives: All Black Join Date: Aug 2009 Location: NWO Toledo Area Posts: 4,720	TDS: To many grumbles around door pin kits, sent me in circles when I wanted some Alston SFC. Glad I wised up and save a good $40 not using him. On top of he charges you extra for the bolt kit that comes free with them. [ they are both bolt and weld in's] Got my Alston SFC from dough herbert racing, dropped shipped right from Alston to me, was even cheaper then Alston sells them. __________________ 2013 5th Gen Firebird on order. 86 Pontiac Firebird [a work in progress] [68 Firebird hoodscoops, custom notchback[1-3 built]rear mounted tach, inverted wing] http://www.thirdgen.org/techboard/v6...-all-over.html ---------------------------------------------- "In certain extreme situations, the law is inadequate. In order to shame its inadequacy, it is necessary to act outside the law. To pursue... natural justice. This is not vengeance. Revenge is not a valid motive, it's an emotional response. No, not vengeance. Punishment."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lone Star Camaro Club Discussions (DFW)	Camaro21	USA - Texas	576	03-31-2017 05:08 PM
Fuse Pull Still Needed?	raider8654	5th Gen Camaro SS LS LT General Discussions	15	12-20-2010 01:34 PM
Stock baseline pull vs. Cammed pull dyno graph	Huggerorange73	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	09-13-2010 09:11 AM
Fuse pull question	2SSARMY	5th Gen Camaro SS LS LT General Discussions	19	06-15-2010 01:35 AM
Fuse pull?	Rage	5th Gen Camaro SS LS LT General Discussions	22	06-06-2010 01:08 AM

05-04-2011, 10:17 PM	#2
drknow90rs Drives: '90 RS 427ci LS-1, '86 IROC 305 TPI Join Date: Apr 2011 Location: Wittmann, AZ Posts: 40	There are a few companies that reproduce them. www.topdownsolutions.com is one of them. They are really good guys there and probably make the best parts for that.

05-05-2011, 07:00 AM	#4
GRASSHOPPER Drives: 1987 z28 Join Date: Jan 2011 Location: callander, ontario, can Posts: 49 View My Garage	i clicked on the link and a 'woman coupon ' site comes up, so i closed and tried again and some other site comes up about travel plans or something. is there a trick to opening the link or i am just missing something, thanks mike

05-06-2011, 07:00 AM	#5
GRASSHOPPER Drives: 1987 z28 Join Date: Jan 2011 Location: callander, ontario, can Posts: 49 View My Garage	i figure there is lots of guys out there looking for these parts and i was able to find the site. so here is the link for future reference http://www.top-downsolutions.com/ this link works, i ordered my parts last night thanks

05-06-2011, 11:10 PM	#6
drknow90rs Drives: '90 RS 427ci LS-1, '86 IROC 305 TPI Join Date: Apr 2011 Location: Wittmann, AZ Posts: 40	OOppsss! I forgot the hyphen! (-) Glad you got it figured out! The owner is a really knowledgable guy and owns a thirdgen himself.

05-12-2011, 10:29 PM	#8
drknow90rs Drives: '90 RS 427ci LS-1, '86 IROC 305 TPI Join Date: Apr 2011 Location: Wittmann, AZ Posts: 40	I love their door pin kits. (Got one on the '86 IROC and the '90 RS. As far as I know, theirs is the only adjustable set on the market.) I wouldnt buy SFC's there, but I also wouldnt buy a hamburger from an ice cream shop! (LOL, sorry Dairy Queen....)

05-14-2011, 12:48 AM	#10
drknow90rs Drives: '90 RS 427ci LS-1, '86 IROC 305 TPI Join Date: Apr 2011 Location: Wittmann, AZ Posts: 40	LOL, I remember hearing about that on TGO... (about the bolts.) I always hated Dairy queen too...