08-09-2015, 11:00 PM | #1 |
|
strut brace question with supercharger?
I have a 2010 with tvs2300 supercharger and would like to install strut brace. I like the stock ones over some of the after market ones. Ive seen the adaptor kits that sold long time ago and appear not available. any new ideas on a stock brace or oem I should say? Oem look nicer in my opinion. thanks
|
08-11-2015, 09:48 AM | #2 |
Drives: 2012 2SS/RS Join Date: Jul 2012
Location: Central IL
Posts: 901
|
What exactly was the adapter kit your talking about? Was it so that you could actually mount the OEM brace? Also I know that the BMR brace will not work with you kit. I had it on my car and added the same kit, it fit, but vibrations started to rub the paint abit. I know the OEM one has alot more room.
__________________
My Build thread! http://www.camaro5.com/forums/showthread.php?t=317027
|
08-12-2015, 09:52 PM | #3 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
2010 did not have the holes pre-drilled on the strut towers so a kit was sold to add them. Mine already had them. Gm parts direct may still have them..
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
08-13-2015, 03:23 AM | #4 |
Drives: 2011 Callaway SC572, 2000 Firehawk Join Date: Nov 2009
Location: Irving, TX
Posts: 465
|
I don't believe they were a GM part. I saw some on ebay 5 or 6 months ago.
__________________
|
08-13-2015, 10:49 AM | #5 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
https://tpis.com/parts/view/267
http://www.camaro5.com/forums/showthread.php?t=192389 This should get you what you need -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
08-19-2015, 08:19 AM | #6 |
Drives: 2011 Camaro 2SS/RS A6 Victory Red Join Date: Aug 2012
Location: Snohomish WA
Posts: 203
|
Here is what mine looks like.
__________________
2011 Camaro 2SS/RS A6/L99 Victory Red
SLP TVS2300 Supercharger 6psi & Coil Covers. Roto Fab CAI. RX Catch can ZL1 Fuel Pump Kooks 1 7/8" LT Headers w/ High Flow Cats Corsa out the back! NT555R 305/35/20 472 RWHP 466 RWTQ 12.11 @ 114.3 MPH 1.81 60' Pacific Raceways Kent, WA 6/6/13 |
08-19-2015, 09:00 PM | #7 |
Drives: IBM 2SS Join Date: Jan 2011
Location: San Antonio, TX
Posts: 858
|
Yikes the strut bar is cheaper than the hardware.
|
|
|
|
|