My 2010 1SS M6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bo White · 11-10-2013, 03:16 PM

I bought the car from a member here about 6 weeks ago. Car already had good parts on it like LTs and an ECS 1500 Paxton blower setup so it had potential. I just want to jot some stuff down as I go with this thing. Some updated pix, it still looks the same as it did except I raised it up a couple of inches and put LS3 badging on the side:

the rich dude · 11-10-2013, 04:04 PM

u raised it a couple inches???? how low was it?

aquablueL99 · 11-10-2013, 04:32 PM

Looks awesome....White is so cool..

Kurt ABL99...

Bo White · 11-10-2013, 05:29 PM

Quote:

Originally Posted by the rich dude

u raised it a couple inches???? how low was it?

It was on the F'n ground.

Bo White · 11-10-2013, 05:47 PM

Since I've bought it I put a lot of BMR stuff in the rear, lightened the tint and put a remote clutch fluid rezzy on.

Bo White · 11-10-2013, 05:50 PM

Since it had OBX headers on it I bought the catback and redyno tune:

LS3 SS · 11-10-2013, 06:15 PM

I love this car. Love all the mods as well. Can you give me a quick breakdown on all of your suspension mods? I'm done with power, and now I'm gonna start doing my suspension. So far I have BMR front rear sway bars, BMR trailing arms with outer bushings, and lowering springs.

Bo White · 11-10-2013, 06:32 PM

Cradle full bushings, trailing arms and bushings, tie rod links and upper control arm bushings.

2010 SSRS · 11-10-2013, 11:45 PM

really nice looking Camaro you have

midnighter · 11-10-2013, 11:53 PM

Awesome ride!

the rich dude · 11-11-2013, 12:23 AM

I'm assuming it has coil overs? Did the guy drive around at that ride height? Love the stance!!!! LoL

Bo White · 11-11-2013, 02:06 AM

Yeah it was drove around like that. Thanks for the complements. And yes, KW coil overs.

Bo White · 12-30-2013, 09:00 AM

So far this is whats done to it:

Exterior

Custom paint
Wrapped roof
Rear Aero Sport Concepts wickerbill
Heritage Front Grille
LED fog lights
ZL1 style front splitter
Painted Tail light Bezels
Tinted side markers
35% tint windows
Lamborghini Orange Brake Calipers
ZL1 Side Skirts
Race Star Dark Stars 17x4.5 front MT 28x6 radials
Race Star Dark Stars 17x10.5 rear Hoosier 28/10.5
Race Star Dark Stars 18x10.5 rear Nitto 295/45 G2s for daily use

Interior

B&M Pro Ratchet Shifter
SLP guage pod
Aeroforce Interceptor Gauge
Metra Dash Kit
Pioneer AVH-4500BT Head Unit
ALL speakers have been replaced with Precision Power speakers
Precision Power 5 channel amp
10" Precision Power subwoofer with custom box for the Camaro

Suspension

BMR Rear Trailing Arms
BMR Rear Trailing Arm Bushings
BMR Toe Rods
BMR Full Cradle Bushings
BMR Upper Control Arm Bushings
BMR engine mounts

Performance

LPE Twin Fuel Pumps
FIC 72lb injectors
Flexfuel
Powerbond underdrive pulley
TSP custom 243/255 camshaft
PRC 13* 260cc cylinder heads milled .035"
Eagle #12946 416ci rotating assembly
Clevite H bearings
ARP 2000 rod bolts
ARP main studs
ARP head bolts
ARP cam bolts
ARP flexplate bolts
Mast stroker windage tray
Rings gapped .024/.020
12.6:1 compression
Powell trunion bushings
Melling 10295 pump with COPO spring
Two Elite Engineering catch cans
ZR1 MAP Sensor
TR7 plugs
TSP 2" Cerakoted Long Tube Headers
OBX Catback
Edelbrock Pro Flo XT LS3 manifold(ported for 102mm TB)
Edelbrock billet fuel rails
102mm Throttle body
5" custom cold air intake
Holley Aluminum LS Valve Covers (Black Crinkle Finish)
TCI flexplate
PTC 8" 5500 stall
Th400
Motive 4.10 gears
LPW Diff cover
HPTuners Gen3Performance and Dyno

Chris-10 · 12-30-2013, 08:21 PM

That looks like gl2filmerguy's ride. Badazz car!!!

11-10-2013, 04:32 PM	#3
aquablueL99 Jackson's COTW Drives: 1968 Camaro & 2010 Camaro 2SS Join Date: Jul 2009 Location: Chalmers, Indiana Posts: 1,740 View My Garage	Looks awesome....White is so cool.. Kurt ABL99... __________________ Tru Blu Beauty http://www.camaro5.com/forums/showthread.php?t=183914

11-10-2013, 05:47 PM	#5
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	Since I've bought it I put a lot of BMR stuff in the rear, lightened the tint and put a remote clutch fluid rezzy on. Attached Images __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

11-10-2013, 05:50 PM	#6
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	Since it had OBX headers on it I bought the catback and redyno tune: Attached Images __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

11-10-2013, 06:15 PM	#7
LS3 SS Drives: 2010 Cyber Grey Camaro SS (LS3) Join Date: Mar 2010 Location: Clarksville TN Posts: 2,275	I love this car. Love all the mods as well. Can you give me a quick breakdown on all of your suspension mods? I'm done with power, and now I'm gonna start doing my suspension. So far I have BMR front rear sway bars, BMR trailing arms with outer bushings, and lowering springs. __________________ GPI SS3 Cam / PRC 255 heads / Forged 376ci bottom / Fore level 2 fuel system / D1SC ProCharger on 12lbs / Alky control dual nozzle / 770 whp / 649 wtq tuned by Ryan Stevens at GPI

11-10-2013, 06:32 PM	#8
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	Cradle full bushings, trailing arms and bushings, tie rod links and upper control arm bushings. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

11-10-2013, 03:16 PM	#1
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	My 2010 1SS M6 I bought the car from a member here about 6 weeks ago. Car already had good parts on it like LTs and an ECS 1500 Paxton blower setup so it had potential. I just want to jot some stuff down as I go with this thing. Some updated pix, it still looks the same as it did except I raised it up a couple of inches and put LS3 badging on the side: Attached Images __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

11-10-2013, 04:04 PM	#2
the rich dude Drives: Getting 2010 Camaro Join Date: Jul 2008 Location: Vancouver Posts: 1,149	u raised it a couple inches???? how low was it?

11-10-2013, 11:45 PM	#9
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	really nice looking Camaro you have __________________ Jannetty Racing JRE Street Package

11-10-2013, 11:53 PM	#10
midnighter Account Suspended Drives: nothing Join Date: Nov 2010 Location: a hole Posts: 17,906	Awesome ride!

11-11-2013, 12:23 AM	#11
the rich dude Drives: Getting 2010 Camaro Join Date: Jul 2008 Location: Vancouver Posts: 1,149	I'm assuming it has coil overs? Did the guy drive around at that ride height? Love the stance!!!! LoL

11-11-2013, 02:06 AM	#12
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	Yeah it was drove around like that. Thanks for the complements. And yes, KW coil overs. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

12-30-2013, 09:00 AM	#13
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	So far this is whats done to it: Exterior Custom paint Wrapped roof Rear Aero Sport Concepts wickerbill Heritage Front Grille LED fog lights ZL1 style front splitter Painted Tail light Bezels Tinted side markers 35% tint windows Lamborghini Orange Brake Calipers ZL1 Side Skirts Race Star Dark Stars 17x4.5 front MT 28x6 radials Race Star Dark Stars 17x10.5 rear Hoosier 28/10.5 Race Star Dark Stars 18x10.5 rear Nitto 295/45 G2s for daily use Interior B&M Pro Ratchet Shifter SLP guage pod Aeroforce Interceptor Gauge Metra Dash Kit Pioneer AVH-4500BT Head Unit ALL speakers have been replaced with Precision Power speakers Precision Power 5 channel amp 10" Precision Power subwoofer with custom box for the Camaro Suspension BMR Rear Trailing Arms BMR Rear Trailing Arm Bushings BMR Toe Rods BMR Full Cradle Bushings BMR Upper Control Arm Bushings BMR engine mounts Performance LPE Twin Fuel Pumps FIC 72lb injectors Flexfuel Powerbond underdrive pulley TSP custom 243/255 camshaft PRC 13* 260cc cylinder heads milled .035" Eagle #12946 416ci rotating assembly Clevite H bearings ARP 2000 rod bolts ARP main studs ARP head bolts ARP cam bolts ARP flexplate bolts Mast stroker windage tray Rings gapped .024/.020 12.6:1 compression Powell trunion bushings Melling 10295 pump with COPO spring Two Elite Engineering catch cans ZR1 MAP Sensor TR7 plugs TSP 2" Cerakoted Long Tube Headers OBX Catback Edelbrock Pro Flo XT LS3 manifold(ported for 102mm TB) Edelbrock billet fuel rails 102mm Throttle body 5" custom cold air intake Holley Aluminum LS Valve Covers (Black Crinkle Finish) TCI flexplate PTC 8" 5500 stall Th400 Motive 4.10 gears LPW Diff cover HPTuners Gen3Performance and Dyno Last edited by Bo White; 10-29-2021 at 09:08 AM.

12-30-2013, 08:21 PM	#14
Chris-10 Drives: 2ss/rs vr 6m Join Date: Mar 2009 Location: New Port Richey,fl Posts: 2,831	That looks like gl2filmerguy's ride. Badazz car!!! __________________ My build thread.click the pic. COTW 10/24/11