New Build 2013 Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BlakeD · 10-29-2017, 11:12 PM

Hey everyone,

Just wanted to share my new build with you and document it as it progresses.

I purchased this car a little over 2 months ago. It's a Ashen Gray Metallic 2013 Camaro L99 2SS, that had 19,500 miles on it. I was able to get this car for $21k and couldn't pass up the deal. I'd like your ideas on the project name for this by the way. Post suggestions below.

I just installed my intake today and will start getting the MAF dialed in properly for idle and part throttle. From there I plan on ordering a wide band O2 so I can start tuning for WOT fueling. Once that is all dialed in I plan on working on the spark table to see what I can get out of the car with no knock. Future plans will be some FI route. I really like the ideas of turbos as my previous car was N/A with a cam.

Current Mods:

Cold Air Inductions intake
Air Scope
Catch Can
BMR Sturt Bar
Blacked out taillight bezels
Tune

LCPLPunk · 10-29-2017, 11:28 PM

I'm confused, so you have a L99 AND a 1LE?

BlakeD · 10-30-2017, 06:52 AM

Quote:

Originally Posted by LCPLPunk

I'm confused, so you have a L99 AND a 1LE?

I forgot to update my signature. I sold the 1LE a few months back.

silversleeper · 10-30-2017, 11:51 AM

That's a good deal. The 70s style rear spoiler is interesting. A build name? Herbie. Or Evilhelldeomonwarlocbadassblackedout. The latter seems more popular.

10-29-2017, 11:12 PM	#1
BlakeD Drives: 2015 Camaro SS 1LE Join Date: Aug 2014 Location: Chattanooga, TN Posts: 286	New Build 2013 Camaro Hey everyone, Just wanted to share my new build with you and document it as it progresses. I purchased this car a little over 2 months ago. It's a Ashen Gray Metallic 2013 Camaro L99 2SS, that had 19,500 miles on it. I was able to get this car for $21k and couldn't pass up the deal. I'd like your ideas on the project name for this by the way. Post suggestions below. I just installed my intake today and will start getting the MAF dialed in properly for idle and part throttle. From there I plan on ordering a wide band O2 so I can start tuning for WOT fueling. Once that is all dialed in I plan on working on the spark table to see what I can get out of the car with no knock. Future plans will be some FI route. I really like the ideas of turbos as my previous car was N/A with a cam. Current Mods: Cold Air Inductions intake Air Scope Catch Can BMR Sturt Bar Blacked out taillight bezels Tune __________________ 2013 2SS RS CAI Intake Air Scope BMR Strut Bar Tune Last edited by BlakeD; 10-29-2017 at 11:22 PM.

10-29-2017, 11:28 PM	#2
LCPLPunk USA-1 Drives: 2010 Camaro SS L99 Join Date: Jul 2016 Location: Near DC Posts: 1,893 View My Garage	I'm confused, so you have a L99 AND a 1LE? __________________ "A Camaro in the garage is safe, but that's not what Camaros are built for..." R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete

10-30-2017, 11:51 AM	#4
silversleeper Big Crow Drives: '13 ZL1 Join Date: Mar 2017 Location: California Posts: 1,487	That's a good deal. The 70s style rear spoiler is interesting. A build name? Herbie. Or Evilhelldeomonwarlocbadassblackedout. The latter seems more popular.