Eagle Eye High Beam HELP - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

easyfame · 05-07-2015, 04:49 PM

So I think I'm close to getting this but need some help.

I have the TRS h13 harness as shown and was wondering how to hook it up to the solenoid part of the eagle eyes.

Do I take the HIGH BEAM OUTPUT from the TRS harness as shown and use the 9006 adapters to connect to the white and black wires coming out of the eagle eye headlight???

Please

2SSRS@Gen5diy · 05-07-2015, 06:24 PM

Hi your hi beam are only a flap inside the headlight, if you apply 12V + to the white wire you will have high beams, that conecter is not right you need a H13 connector.

easyfame · 05-07-2015, 06:26 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

Hi your hi beam are only a flap inside the headlight, if you apply 12V + to the white wire you will have high beams, that conecter is not right you need a H13 connector.

That connecter is a 9006 for the high beam output on the trs harness.. I would take the red from the adapter and connect to white. If that's not right what do I need then and how do I do it?

Sent from my iPhone using Tapatalk

Fieryfight · 05-08-2015, 11:34 PM

I assume you are installing HID's so take a look at this guide http://www.camaro5.com/forums/showthread.php?t=128130

05-07-2015, 04:49 PM	#1
easyfame Drives: 2013 Camaro LFX Join Date: Jan 2013 Location: California Posts: 119	Eagle Eye High Beam HELP So I think I'm close to getting this but need some help. I have the TRS h13 harness as shown and was wondering how to hook it up to the solenoid part of the eagle eyes. Do I take the HIGH BEAM OUTPUT from the TRS harness as shown and use the 9006 adapters to connect to the white and black wires coming out of the eagle eye headlight??? Please __________________ 2013 1LS Black Mods MRT V2 Axle Back, Cold Air Inductions Intake, Vitesse Throttle Controller, 20" Voxx SS Wheels Matte Black, Blacked Out Bowtie, Side Markers, Taillight Bezels, Front Bowtie Delete, 1LE Suede Steering Wheel, Shift Knob and boot. 4-Pack Gauge Cluster, Fog Lights

05-08-2015, 11:34 PM	#4
Fieryfight Drives: 2011 Camaro 2LT IBM Convertible Join Date: May 2013 Location: Cabot, Arkansas Posts: 146 View My Garage	I assume you are installing HID's so take a look at this guide http://www.camaro5.com/forums/showthread.php?t=128130 __________________ ...........................................2011 2LT IBM Convertible

05-07-2015, 06:24 PM	#2
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Hi your hi beam are only a flap inside the headlight, if you apply 12V + to the white wire you will have high beams, that conecter is not right you need a H13 connector.