You are browsing camaro5 
 |
|
11-24-2017, 07:36 PM
|
#1 |
 
Drives: 2014 ZL1 Summit White Join Date: Jul 2012
Location: Boulder,Co
Posts: 312
|
Tow hook
I am looking at adding a front tow hook on my 14 ZL1, I see there are quite a few companies that sell them.
Is it lots of drilling to install one? Which is the hook most of you are getting? |
|
|
|
11-24-2017, 10:52 PM
|
#2 |
|
Formerly RJT2SSRS
Drives: 2013 ZL1 Join Date: Jun 2016
Location: Woodhaven,MI
Posts: 122
|
Randy T ZL1 Addons has a decent tow hook kit. Put one on the front of my 13 ZL1 and was pretty easy. Go to their web site and take a look at the install instructions. Good luck with your project.
|
|
|
|
|
11-25-2017, 11:06 AM
|
#3 |
|
Resident nomad
Drives: 2014 Summit White 1SS/1LE Join Date: Nov 2015
Location: Gilbert, AZ
Posts: 1,765
|
Same here. Used ZL1 Add On's tow hook for the front, and it was straight forward. Just had to drill one hole (well, pilot and full) behind the removable plastic cover on the passenger side of the bumper, and then bolt the tow hook receiver on.
__________________
Sold:
2007 Z06 2002 Viper GTS/ACR 2003 Z06 1965 FFR Cobra 2012 Nissan 370Z ADM LSA Stage II, Roto-Fab CAI, Kooks LTH/HFC's, Phastek CC, ported TB, Mishimoto radiator and oil cooler, BC Racing ER Series CO's, JPSS 32mm Black Magic rear bar, JPSS front inserts, R1 Concepts Premier slotted rotors/Goodrich SS lines, Schroth ASM harness, MGW flatstick, Brey-Krause HB, Tuned by NicD, at Cordes Performance Racing. |
|
|
|
|
11-25-2017, 04:21 PM
|
#4 |
|
HAMMER PILOT
Drives: 13 ZL1#182, 85 CJ7, 16 Silverado Join Date: Nov 2011
Location: Tucson AZ
Posts: 4,386
|
I believe Skylane765 has some.
__________________
 "DO YOU WANT ME TO PUT THE HAMMER DOWN?" |
|
|
|
|
11-27-2017, 07:28 PM
|
#5 | |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,063
|
Install Instructions
Quote:
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
|
11-27-2017, 07:58 PM
|
#6 |
|
Formerly RJT2SSRS
Drives: 2013 ZL1 Join Date: Jun 2016
Location: Woodhaven,MI
Posts: 122
|
olblue75 I went to the web site but did not find th instructions. I will look in garage tomorrow. May still have them.
Did you try youtube for install video? May also be in the DIY thread. |
|
|
|
|
11-28-2017, 09:35 AM
|
#7 |
 Drives: 2013 ZL1 M6 Join Date: Sep 2016
Location: CA Bay Area
Posts: 248
|
Super easy to install. They include good instructions with a template on where to drill the hole. I didn't see any instructions on their site.
__________________
Fast 850cc Injectors, ATI Balancer, 8.66 Lower Pulley, 2.55 Upper Pulley, Lingenfelter CAI, Kooks LT with cat delete pipes, Noweeds Exhaust Cutouts (extremely loud under full throttle), BTR Stage 3 Cam, BTR Platinum 660 Valve Spring Kit, TR7ix Iridium Spark Plugs, Lingenfelter Solid Isolator, 160 Degree Thermostat, Larger SC Coolant Reservoir with Hose Relocation Kit, BMR 1.25" Lowering Springs, MGW Short Throw Shifter, Racing Brake 2 piece rotors front and rear, Starkweather Performance Custom Dyno Tune on 91 Octane.
691.38 RWHP 630.35 RWTQ |
|
|
|
|
12-04-2017, 11:37 PM
|
#8 |
 
Drives: Shop Foreman Join Date: Dec 2017
Location: Gilbertsville Ky
Posts: 24
|
Check out are new crash bumpers designed to work with ZL1 addons tow hooks http://www.camaro5.com/forums/showthread.php?t=514715
|
|
|
|
|
12-18-2017, 01:58 PM
|
#9 | |
|
Quote:
|
|
|
|
|
|
|
|
|
 |
|
|
