Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro Z/28 Forum - Z/28 Specific Topics


Reply
 
Thread Tools
Old 09-22-2020, 06:09 PM   #1
SummitWhite1LE
SICC
 
SummitWhite1LE's Avatar
 
Drives: 2014 2SS1LE Summit White Camaro
Join Date: May 2014
Location: St. Louis Missouri
Posts: 485
will 325 30 19 Eagle F1 Supercar 3 fit square?

Will 325 30 19 Eagle F1 Supercar 3 fit square?



Hello I was seeing if anyone knows or has run 325 eagle f1 supercar square on their z28 with stock suspension. I am at maxed out with camber.

Thank you.
SummitWhite1LE is offline   Reply With Quote
Old 09-22-2020, 07:11 PM   #2
cdb95z28


 
cdb95z28's Avatar
 
Drives: 2022 1SS 1LE A10 BCD WCT+PDR
Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,192
It partly depends on your wheel offset. And you state you are maxed out on camber, what is your camber #? What tire are you currently running?

I just did 325/30-19 Goodyear 3R square on my '14 1LE with the Z's DSSV struts. I run 20mm offset front wheels and used a 5mm spacer, effectively making it a 15mm offset.

But I also have Vorshlag camber plates at full in. As long as you have about .250" clearance between the tire and the strut you will be good. You may need a small spacer.

Take a look at your current clearance and make the call from that. If you are already near .250" clearance then you'll have to run a spacer.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
cdb95z28 is online now   Reply With Quote
Old 09-22-2020, 07:18 PM   #3
SummitWhite1LE
SICC
 
SummitWhite1LE's Avatar
 
Drives: 2014 2SS1LE Summit White Camaro
Join Date: May 2014
Location: St. Louis Missouri
Posts: 485
Quote:
Originally Posted by cdb95z28 View Post
It partly depends on your wheel offset. And you state you are maxed out on camber, what is your camber #? What tire are you currently running?

I just did 325/30-19 Goodyear 3R square on my '14 1LE with the Z's DSSV struts. I run 20mm offset front wheels and used a 5mm spacer, effectively making it a 15mm offset.

But I also have Vorshlag camber plates at full in. As long as you have about .250" clearance between the tire and the strut you will be good. You may need a small spacer.

Take a look at your current clearance and make the call from that. If you are already near .250" clearance then you'll have to run a spacer.
I also have vorshlag camber plates I am at -3.3 front 1.9 rear. I am also a 14 1le with stock z28 suspension and wheels. Did you have any rub when you are turning lock to lock?

Sent from my SM-G892A using Tapatalk
SummitWhite1LE is offline   Reply With Quote
Old 09-22-2020, 07:35 PM   #4
AG1LE


 
AG1LE's Avatar
 
Drives: '14 1LE
Join Date: Nov 2013
Location: NJ
Posts: 2,435
It may not help, but I run 325 square MPS4S on Z/28 wheels, but with coilovers (not OEM DSSV).
AG1LE is offline   Reply With Quote
Old 09-22-2020, 07:37 PM   #5
cdb95z28


 
cdb95z28's Avatar
 
Drives: 2022 1SS 1LE A10 BCD WCT+PDR
Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,192
I am currently at -2.3*/-1.6*, but I have the Detroit Speed Kit 1 springs and ARBs on the DSSVs. Your Z/28 wheels have an 11mm offset, so that helps. You are currently running 305/30 up front?

I do not have any rubbing anywhere.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
cdb95z28 is online now   Reply With Quote
Old 09-22-2020, 07:42 PM   #6
SummitWhite1LE
SICC
 
SummitWhite1LE's Avatar
 
Drives: 2014 2SS1LE Summit White Camaro
Join Date: May 2014
Location: St. Louis Missouri
Posts: 485
Quote:
Originally Posted by cdb95z28 View Post
I am currently at -2.3*/-1.6*, but I have the Detroit Speed Kit 1 springs and ARBs on the DSSVs. Your Z/28 wheels have an 11mm offset, so that helps. You are currently running 305/30 up front?

I do not have any rubbing anywhere.
Yes I have been on 305 30 19 rival for the last two seasons for autocross I was thinking about running these for next season

Sent from my SM-G892A using Tapatalk
SummitWhite1LE is offline   Reply With Quote
Old 09-22-2020, 07:56 PM   #7
cdb95z28


 
cdb95z28's Avatar
 
Drives: 2022 1SS 1LE A10 BCD WCT+PDR
Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,192
My first move would be to see what clearance you have now. The Tire rack specs a section width of 13" for the 325/30-19 F1 Supercar 3 and 12.3" for the Rival 305/30-19. That is .350" (on paper) change in sidewall width on one side that will eat into any clearance you currently have.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
cdb95z28 is online now   Reply With Quote
Old 09-22-2020, 07:58 PM   #8
cdb95z28


 
cdb95z28's Avatar
 
Drives: 2022 1SS 1LE A10 BCD WCT+PDR
Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,192
I installed longer wheel studs long ago in anticipation of being able to fine tune with spacers of varying thickness. I can go to 12mm with no problems. But I believe with the OE studs, 5mm is the max spacer.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
cdb95z28 is online now   Reply With Quote
Old 09-22-2020, 08:38 PM   #9
AustexaSS
Build Date - Dec 08, 2014
 
AustexaSS's Avatar
 
Drives: 2015 Z/28, #1007, Black A/C Stereo
Join Date: Oct 2015
Location: Austin, Texas
Posts: 197
Quote:
Originally Posted by cdb95z28 View Post
I installed longer wheel studs long ago in anticipation of being able to fine tune with spacers of varying thickness. I can go to 12mm with no problems. But I believe with the OE studs, 5mm is the max spacer.
A 5mm spacer will still allow 8 full turns of the lug nuts on stock studs. Would recommend switching to some Detroit Speed open ended lug nuts to make certain you have achieved enough coverage on the threads.
AustexaSS is offline   Reply With Quote
Old 09-28-2020, 09:26 PM   #10
RaycinSS
 
RaycinSS's Avatar
 
Drives: 2015 Camaro Z/28
Join Date: Jan 2011
Location: Arlington,TX
Posts: 557
Quote:
Originally Posted by SummitWhite1LE View Post
Will 325 30 19 Eagle F1 Supercar 3 fit square?



Hello I was seeing if anyone knows or has run 325 eagle f1 supercar square on their z28 with stock suspension. I am at maxed out with camber.

Thank you.
These are the exact tires with stock wheels that were on my car when I purchased it. I had zero issues with rubbing running the stock alignment settings. I don't know if/
how it would be affected with your maxed out camber.
RaycinSS is offline   Reply With Quote
Old 09-29-2020, 03:13 PM   #11
SummitWhite1LE
SICC
 
SummitWhite1LE's Avatar
 
Drives: 2014 2SS1LE Summit White Camaro
Join Date: May 2014
Location: St. Louis Missouri
Posts: 485
Thank you

Sent from my SM-G892A using Tapatalk
SummitWhite1LE is offline   Reply With Quote
Old 09-29-2020, 03:37 PM   #12
The_Raging_Bull
Raging Bull Reborn
 
The_Raging_Bull's Avatar
 
Drives: '09 CGM Z063LZ '15 RH Z/28 #0631
Join Date: Mar 2012
Location: Broken Arrow OK
Posts: 765
You can certainly run 325-30-19 square on all four corners with Michelin Piiot Sport Cup 2 tires. They corner like a scalded dog on my Z.
__________________


Toy 1 '15 RH Z/28 w/AC & Radio S/N 0631
Toy 2 '09 CGM Z06 3LZ
My DD: '17 Ford Mustang GT
Her DD: '14 F150 Ecoboost 3.5
The_Raging_Bull is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.