Utah Utes? - Page 389 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RogueSS · 09-21-2011, 04:33 PM

I no longer have a 4X4. JDP did a great job putting Pfadt drop springs and a rear balance bar in as well as a custom alignment. The car looks awesome and handles even better.

As always JDP rocks!

Darth V8R · 09-21-2011, 05:24 PM

Quote:

Originally Posted by RogueSS

I no longer have a 4X4. JDP did a great job putting Pfadt drop springs and a rear balance bar in as well as a custom alignment. The car looks awesome and handles even better.

As always JDP rocks!

Let's see some pictures!

UHP-CAMARO · 09-21-2011, 09:55 PM

Got the job. Have to spend all of next week in Salina for training.

StoopDude · 09-21-2011, 10:11 PM

Congrats!!

sheslc4 · 09-21-2011, 10:29 PM

Quote:

Originally Posted by UHP-CAMARO

Got the job. Have to spend all of next week in Salina for training.

Congrats!!

pogiskier · 09-21-2011, 11:37 PM

Best of luck with the new Job. UHP.
Thanks for the wheels they are great!

SSOOCH · 09-21-2011, 11:44 PM

Congrats UHP! Nice JonnyB! About f**king time Rogue!!

JDP Motorsports · 09-22-2011, 02:16 AM

Quote:

Originally Posted by RogueSS

I no longer have a 4X4. JDP did a great job putting Pfadt drop springs and a rear balance bar in as well as a custom alignment. The car looks awesome and handles even better.

As always JDP rocks!

We appreciate your business and support Mike!! I'm glad your enjoying it and let me know if you have any questions!

Quote:

Originally Posted by UHP-CAMARO

Got the job. Have to spend all of next week in Salina for training.

CONGRATS!!!!!

SSOOCH · 09-25-2011, 07:58 PM

Cruise night. Tuesday. 6-8pm at the Astro Burger on 104th and Redwood Road. FYI.*

thebrainhart · 09-26-2011, 01:39 AM

I might show up, if I wasn't spraying axle grease all over the #@$%^@^ place!

geminidreams · 09-26-2011, 12:31 PM

Congrats on the new job UHP.. Cool to all those that got mods done on your cars. Awesome...

I myself will be at JDP for some maint work to be done. I only trust my car with them..

Darth V8R · 09-26-2011, 03:40 PM

Quote:

Originally Posted by thebrainhart

I might show up, if I wasn't spraying axle grease all over the #@$%^@^ place!

Did you end up ordering replacements, or are you looking at upgraded ones? Mr. Wizard has talked me into getting the DSS Stage 5 1400HP bad boys

thebrainhart · 09-26-2011, 09:55 PM

Yeah, that's the route I'm going too. If Jordan blew through a brand new GM axle, they obviously won't cut it.
I'll probably put a new boot on it to band aid it for the cruise this weekend, but I'll be getting the 1400hp axles. Won't ever need that much, but for the price difference, might as well.
Sucks though, pushes off my plans for Pfadt rear subframe mounts, engine mounts, toe links, trailing arms, torque converter, a different cam, underdrive pulley, better exhaust, etc, etc, etc...

Darth V8R · 09-27-2011, 12:33 PM

Quote:

Originally Posted by thebrainhart

Yeah, that's the route I'm going too. If Jordan blew through a brand new GM axle, they obviously won't cut it.
I'll probably put a new boot on it to band aid it for the cruise this weekend, but I'll be getting the 1400hp axles. Won't ever need that much, but for the price difference, might as well.
Sucks though, pushes off my plans for Pfadt rear subframe mounts, engine mounts, toe links, trailing arms, torque converter, a different cam, underdrive pulley, better exhaust, etc, etc, etc...

Yeah, definitely pushes out some of the more fun mods, but I think we'll both be happier in the long run when don't have to keep replacing the weak links!

09-21-2011, 04:33 PM	#5433
RogueSS Drives: Black 2SS/RS M6 #100296 Join Date: Feb 2010 Location: Salt Lake City, UT Posts: 542 View My Garage	I no longer have a 4X4. JDP did a great job putting Pfadt drop springs and a rear balance bar in as well as a custom alignment. The car looks awesome and handles even better. As always JDP rocks! __________________ AirRaid CAI, GM Performance Parts Axle Back Exhaust, Pfadt Rear Balance Bar, Pfadt 1.25" Drop Sorings, Elite Engineering PCV Catch Can, Hurst Shifter All work by JDP Motorsports 04/14/12: 381 RWHP 383 RWTQ at JDP Motorsports

09-21-2011, 09:55 PM	#5435
UHP-CAMARO Drives: Traded this for a 2013 ZL1 Join Date: Aug 2008 Location: Utah Posts: 137	Got the job. Have to spend all of next week in Salina for training. __________________

09-21-2011, 11:37 PM	#5438
pogiskier Drives: 2011 camaro 2ss black,hurst shifter Join Date: Aug 2010 Location: Logan, UT Posts: 307	Best of luck with the new Job. UHP. Thanks for the wheels they are great! __________________

09-21-2011, 11:44 PM	#5439
SSOOCH Camaro SL,UTs Drives: 2010 Camaro SS/RS #16429 Join Date: Sep 2006 Location: South Jordan, UT Posts: 7,358 View My Garage	Congrats UHP! Nice JonnyB! About f**king time Rogue!! __________________

09-25-2011, 07:58 PM	#5441
SSOOCH Camaro SL,UTs Drives: 2010 Camaro SS/RS #16429 Join Date: Sep 2006 Location: South Jordan, UT Posts: 7,358 View My Garage	Cruise night. Tuesday. 6-8pm at the Astro Burger on 104th and Redwood Road. FYI.* __________________

09-21-2011, 10:11 PM	#5436
StoopDude Drives: 2011 Camaro 2LT RS Join Date: Apr 2011 Location: Layton, Utah Posts: 324	Congrats!!

09-26-2011, 01:39 AM	#5442
thebrainhart Drives: '10 Camaro 2SS/RS CGM LS3 A6 Join Date: May 2009 Location: Bountiful, UT Posts: 683	I might show up, if I wasn't spraying axle grease all over the #@$%^@^ place! __________________ - 2010 Camaro 2SS/RS CGM LS3 A6 "Lurch" - FLYNGSS - Some ProCharger, Alky, CompCams, Brian Tooley, Holley, Livernois, K&N, Ridetech, DSS, Kooks, JDP Motorsports, Pfadt, BMR, Prothane, Weld, M&H, Mickey Thompson, RKSport, Elite, Garys, Defenderworx, Anvil, etc.

09-26-2011, 12:31 PM	#5443
geminidreams Drives: ABM 2LT / RS Join Date: Jun 2009 Location: Utah Posts: 2,391	Congrats on the new job UHP.. Cool to all those that got mods done on your cars. Awesome... I myself will be at JDP for some maint work to be done. I only trust my car with them.. __________________ Mods to date: ABM Catch can, Pfadt stage II racing suspension, axel back magna flows, Araid CAI. New Vinyl stripes and Powder coated my factory rims.

09-26-2011, 09:55 PM	#5445
thebrainhart Drives: '10 Camaro 2SS/RS CGM LS3 A6 Join Date: May 2009 Location: Bountiful, UT Posts: 683	Yeah, that's the route I'm going too. If Jordan blew through a brand new GM axle, they obviously won't cut it. I'll probably put a new boot on it to band aid it for the cruise this weekend, but I'll be getting the 1400hp axles. Won't ever need that much, but for the price difference, might as well. Sucks though, pushes off my plans for Pfadt rear subframe mounts, engine mounts, toe links, trailing arms, torque converter, a different cam, underdrive pulley, better exhaust, etc, etc, etc... __________________ - 2010 Camaro 2SS/RS CGM LS3 A6 "Lurch" - FLYNGSS - Some ProCharger, Alky, CompCams, Brian Tooley, Holley, Livernois, K&N, Ridetech, DSS, Kooks, JDP Motorsports, Pfadt, BMR, Prothane, Weld, M&H, Mickey Thompson, RKSport, Elite, Garys, Defenderworx, Anvil, etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Order tracking for Utah	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	05-06-2009 03:32 PM
Utah Auto show - silver ss with inferno orange interior	kalel	5th Gen Camaro SS LS LT General Discussions	2	01-17-2009 11:18 AM
Utah role call!	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	3	10-15-2008 09:25 PM
Dealer news in Utah	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	23	03-27-2008 09:53 PM
GM bringing tricked-out trucks, utes, roadsters and more to SEMA show	KILLER74Z28	General Automotive + Other Cars Discussion	14	11-06-2006 05:44 PM