04-12-2021, 11:37 AM | #1 |
BUMBL Z
|
Suspension question
Can't remember if our factory magride uses bump stops. Can anyone confirm? Going back to magride from coilovers and trying to get a parts list together.
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq Last edited by spadz93; 04-12-2021 at 11:52 AM. |
04-12-2021, 12:24 PM | #2 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,212
|
Yes they do
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
04-12-2021, 01:02 PM | #3 |
BUMBL Z
|
Got it, thanks. gmpartsdirect.com has "without performance package" in the comments under the part number, so I was a little confused
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
04-12-2021, 02:26 PM | #4 | |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,212
|
Quote:
I'm not so sure now if the ZL1 has an internal or external at the front. I could not find a parts diagram with the mag ride strut, you might have to take your vin to a local dealer. They will have a detailed parts diagram. Here's the rear, but it doesn't call out the part # https://www.wholesalegmpartsonline.c...rimLevel=25857
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
|
|
|
|
|