04-12-2013, 08:45 AM | #1 | |
Drives: Camaro Join Date: Apr 2013
Location: Beltsville, MD
Posts: 21
|
Hi Everyone, wer're Back on Camaro5
Hey everyone, how's it going? We at Behe Performance have been off of Camaro5 for a while, but now we're back on the forum again as a Camaro5 and Mid-Atlantic Vendor. Just wanted to take a moment to say hi to the forum and give everyone our new contact info as our shop moved.
We're now in Beltsville, MD just of 495 exit 25. So we're really accessible to most everyone in the DC/MD/NoVA area now. We can do almost anything in house too. Obviously we're well known for tuning, but car builds, race prep, fabrication, engine building, etc... there's nothing we can't do. Feel free to give us a call if you need anything. Just to make this post a little bit more interesting I thought I'd throw up a gratuitous dyno video, of course. This is actually a pretty neat race car that we've been helping out with and it's very near and dear to my heart. By the way, on the forum or on the phone, you'll probably interact with me, Andy. I'm the guy that has to drive this car on track too. It's really neat though, at my other job at KaleidoLINKS I teach physics 3 days a week and 2 days a week the students come and help build race cars, so the car in the dyno vid was almost entirely built by high school students. Local guys may have seen it in the DC Auto Show or on TV the past few years, as well. Anyway, enjoy the video and we'll see you guys around the forum. Last edited by BehePerformance; 04-12-2013 at 09:06 AM. |
|
04-12-2013, 03:31 PM | #2 |
Drives: 2010 Join Date: May 2012
Location: Riva
Posts: 16
|
Since you have been of the forum for a while have you considered a open house for Camaro 5 club members? I know you guys built my 2010 with 703 to the rear wheels two years ago and I've only one problem. I was to dumb to listen to you about the clutch
Good luck see you sometime soon about the clutch. |
04-12-2013, 04:21 PM | #3 | |
Drives: Camaro Join Date: Apr 2013
Location: Beltsville, MD
Posts: 21
|
Quote:
You know, I've considered an open house, it might be a great thing to really showcase why we're so good at tuning and the fact that we don't just do internet flashes and how involved, tedious, and time consume true tuning truly is. Not to mention all of the other work we can do on cars! We also work on a lot of Porsches, of course, so we've done PCA open houses here. It would be neat to do an open house for Camaro 5 members. The other some other cool promotional things we might be able to do for Camaro 5 members too, so we'll definitely think about some of those. Thanks for the post and we're glad you're enjoying your car! Let us know whenever we can help you out with your clutch. In fact I'm putting one in the Camaro in the video this weekend. Andy |
|
04-14-2013, 07:55 PM | #4 |
Drives: pontiac g8 gt Join Date: Jan 2012
Location: silver spring MD
Posts: 37
|
Can't wait to take my G8 in for a tune ! Do you guys sell headers and stuff too?
|
04-14-2013, 08:20 PM | #5 |
Drives: 2SS RS Join Date: Mar 2010
Location: MD
Posts: 1,272
|
Hmmm...you folks are fairly close to me. I may need some exhaust cutouts installed and a suspension issue looked at. That sound like something you folks can handle?
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
|
04-15-2013, 07:13 AM | #6 |
Drives: Camaro Join Date: Apr 2013
Location: Beltsville, MD
Posts: 21
|
Absolutely. We're really not parts vendors, so you won't see any ads for us selling parts in the vendors marketplace or anything like that, but we can certainly get parts for customers and install them.
|
04-15-2013, 07:14 AM | #7 |
Drives: Camaro Join Date: Apr 2013
Location: Beltsville, MD
Posts: 21
|
|
|
|