Adding Mylink to older gen5 camaro's - Page 60 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

WEAPONX42 · 01-05-2014, 11:20 PM

Quote:

Originally Posted by The Stig

I've talked with some of the GM engineers while at SEMA and Fest - they are not doing a conversion kit for earlier models.

I spoke with some dealers and they say the same to me...nothing GM make for upgrade or put Mylink in old Camaros.
:(

Eich · 01-06-2014, 07:22 AM

Quote:

Originally Posted by The Stig

I've talked with some of the GM engineers while at SEMA and Fest - they are not doing a conversion kit for earlier models.:

Quote:

Originally Posted by WEAPONX42

I spoke with some dealers and they say the same to me...nothing GM make for upgrade or put Mylink in old Camaros.
:(

There's not much incentive for GM to create an upgrade kit. They want to sell new cars. There's not much money in it for them to create a ~$2k upgrade package to serve only 3 model years. They would much rather these people trade-in for a new car.

FISHTAIL · 01-06-2014, 07:04 PM

This website sells brand new upgrade OEM kits that come preprogrammed and with all parts needed for about $1800.

They even have used kits starting as low as $1500

http://autospatech.com/navi/chevrole...avigation.html

Pagliaro · 01-06-2014, 08:06 PM

Quote:

Originally Posted by FISHTAIL

This website sells brand new upgrade OEM kits that come preprogrammed and with all parts needed for about $1800.

They even have used kits starting as low as $1500

http://autospatech.com/navi/chevrole...avigation.html

Linked many times in this thread.

Not one person has stated they have purchased their kit. Non-Nav I believe is $1800 from them.

Caddyroger · 01-06-2014, 08:17 PM

Quote:

Originally Posted by FISHTAIL

This website sells brand new upgrade OEM kits that come preprogrammed and with all parts needed for about $1800.

They even have used kits starting as low as $1500

http://autospatech.com/navi/chevrole...avigation.html

Well you can buy one and let every one know about it.

The Stig · 01-06-2014, 08:37 PM

Quote:

Originally Posted by Pagliaro

Linked many times in this thread.

Not one person has stated they have purchased their kit. Non-Nav I believe is $1800 from them.

This.

Pagliaro · 01-06-2014, 08:58 PM

Out of curiosity can I power up the unit without it being in a car even if it just goes to a chev logo screen?

I know aftermarket units can be powered without being in the car but these sound like they need to be.

About the link above that keeps reappearing It's too bad we can't put a disclaimer that automatically posts to the last response in the thread so it doesn't keep resurfacing.

The Stig · 01-06-2014, 09:33 PM

Quote:

Originally Posted by Pagliaro

Out of curiosity can I power up the unit without it being in a car even if it just goes to a chev logo screen?

I know aftermarket units can be powered without being in the car but these sound like they need to be.

About the link above that keeps reappearing It's too bad we can't put a disclaimer that automatically posts to the last response in the thread so it doesn't keep resurfacing.

No. To power up a MyLink it needs a data connection to a CANbus to tell it to turn on.

Pagliaro · 01-06-2014, 09:57 PM

Quote:

Originally Posted by The Stig

No. To power up a MyLink it needs a data connection to a CANbus to tell it to turn on.

Thanks it will be a long time I guess before I figure out if mine is indeed a dud.

I found this if it's of any help

http://ifar.ca/en/products/evo-series/evo-all/

WarWolfX0 · 01-06-2014, 11:05 PM

So my nav unit that i got has a part #23182551
I didn't see that part listed, it is listed as F-RADIO.
yours nav 22992934 = F-CONTROL, non-nav 22965237 = DASH CONTROL UNIT
Do you think there will be a issue?

I was looking to start getting the parts
So from what is looks like I may lose my onstar doing this upgrade (safe & sound)
I am not sure what part i will still need this is my list so far

Onstar part #22903686
Antenna(nav/sunroof) #22739134
Splitter #20960972
harness #20016940
DIGITAL RDO&VEH LOC ANT COAX #13581173
COMN INTERFACE MDL COAX #13581174
dose this look right?
btw what is the part number for the backup cam that will work with this.

DWALEX · 01-07-2014, 06:46 AM

Quote:

Originally Posted by WarWolfX0

So my nav unit that i got has a part #23182551
I didn't see that part listed, it is listed as F-RADIO.
yours nav 22992934 = F-CONTROL, non-nav 22965237 = DASH CONTROL UNIT
Do you think there will be a issue?

I was looking to start getting the parts
So from what is looks like I may lose my onstar doing this upgrade (safe & sound)
I am not sure what part i will still need this is my list so far

Onstar part #22903686
Antenna(nav/sunroof) #22739134
Splitter #20960972
harness #20016940
DIGITAL RDO&VEH LOC ANT COAX #13581173
COMN INTERFACE MDL COAX #13581174
dose this look right?
btw what is the part number for the backup cam that will work with this.

this are the parts:
*Camera p/n 22767362
*Bracket p/n 22766257

GTPprix · 01-07-2014, 08:08 AM

Quote:

Originally Posted by Pagliaro

Out of curiosity can I power up the unit without it being in a car even if it just goes to a chev logo screen?

I know aftermarket units can be powered without being in the car but these sound like they need to be.

About the link above that keeps reappearing It's too bad we can't put a disclaimer that automatically posts to the last response in the thread so it doesn't keep resurfacing.

You may be able to. I cant remember on the Camaro application specifically but on most my link applications you can bypass the wakeup by simply pressing the power button on the unit with battery power applied.

I would do this on a bench though definitely, there are considerable changes in the data frames the radio uses between 2010 and 2013 this is part of what our programming corrects (in addition to unlocking features in motion, setting it up for the differences in audio etc). There was even a lockup issue that had a PI on it due partially to this and its very easy to lockup the radio in certain instances that requires a reflash to unlock.

2SSRS@Gen5diy · 01-07-2014, 08:10 AM

Quote:

Originally Posted by DWALEX

this are the parts:
*Camera p/n 22767362
*Bracket p/n 22766257

That is for cars that have the plug in the rear of the bumper, in 2010 no car came with that so you need to use a flat camera

DWALEX · 01-07-2014, 09:26 AM

Guys, I don't know why make this more hard, if the car doesn't have the harness you can make a new one with the same characteristics. if you can't find the connector you always can use another, any delphi 150 sealed series with the same positions can be used for this just change the OEM camera connector

01-06-2014, 07:04 PM	#829
FISHTAIL Drives: Sedan & 2SS / RS Join Date: Jun 2009 Location: Florida Posts: 377	This website sells brand new upgrade OEM kits that come preprogrammed and with all parts needed for about $1800. They even have used kits starting as low as $1500 http://autospatech.com/navi/chevrole...avigation.html __________________ Drives: 2012 2SS/Black/RS/A6

01-06-2014, 08:58 PM	#833
Pagliaro RIP Betsy ( Vitara ) Drives: '11 SGM 1LT/RS Join Date: Oct 2012 Location: Ottawa, Ontario Posts: 1,178	Out of curiosity can I power up the unit without it being in a car even if it just goes to a chev logo screen? I know aftermarket units can be powered without being in the car but these sound like they need to be. About the link above that keeps reappearing It's too bad we can't put a disclaimer that automatically posts to the last response in the thread so it doesn't keep resurfacing. __________________ First retrofitted 2014 mylink.

01-07-2014, 09:26 AM	#840
DWALEX Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010 Location: Kansas Posts: 978	Guys, I don't know why make this more hard, if the car doesn't have the harness you can make a new one with the same characteristics. if you can't find the connector you always can use another, any delphi 150 sealed series with the same positions can be used for this just change the OEM camera connector __________________ ...First CAMARO (2SS/RS 2010)

01-06-2014, 11:05 PM	#836
WarWolfX0 Drives: 2010 Chevy Camaro 2SS/RS 1LE Manual Join Date: Jan 2011 Location: Park Ridge Posts: 114 View My Garage	So my nav unit that i got has a part #23182551 I didn't see that part listed, it is listed as F-RADIO. yours nav 22992934 = F-CONTROL, non-nav 22965237 = DASH CONTROL UNIT Do you think there will be a issue? I was looking to start getting the parts So from what is looks like I may lose my onstar doing this upgrade (safe & sound) I am not sure what part i will still need this is my list so far Onstar part #22903686 Antenna(nav/sunroof) #22739134 Splitter #20960972 harness #20016940 DIGITAL RDO&VEH LOC ANT COAX #13581173 COMN INTERFACE MDL COAX #13581174 dose this look right? btw what is the part number for the backup cam that will work with this.