04-13-2018, 07:06 AM | #1 |
Pride and Joy
Drives: 2014 Camaro SS2 Spring Edition Join Date: Dec 2016
Location: NEW JERSEY
Posts: 18
|
Sub thump wire harness resistor location
I added an amp to my camaro using the sub thump wiring harness, Their is a resistor in the package, I have tried calling sub thump and e-mailing sub thump a few time but never got a reply. can some show me a diagram or picture of where this resister goes.
Thanks Johnny |
04-13-2018, 04:20 PM | #2 |
Drives: 03 BLK SSS, 13 BRM ZL1. Join Date: Feb 2012
Location: CT
Posts: 159
|
Go to YouTube, search for sub thump no space.
There is a link with 4 vids. One shows install of resistor. Not sure if below link will work. https://www.youtube.com/playlist?lis...31CED978B76B24 Last edited by Leviser; 04-13-2018 at 04:22 PM. Reason: Typo |
04-18-2018, 10:30 AM | #3 |
Pride and Joy
Drives: 2014 Camaro SS2 Spring Edition Join Date: Dec 2016
Location: NEW JERSEY
Posts: 18
|
Perfect, thank you.
|
04-23-2018, 07:57 AM | #4 |
Pride and Joy
Drives: 2014 Camaro SS2 Spring Edition Join Date: Dec 2016
Location: NEW JERSEY
Posts: 18
|
So I attached the resistor to the orange wire like the video showed still the chimes and bells are loud as hell.
Any advice? once again tried calling and e-mailing sub thump this guy will never answer or reply must be a 1 person company |
04-23-2018, 11:25 AM | #5 |
Drives: 03 BLK SSS, 13 BRM ZL1. Join Date: Feb 2012
Location: CT
Posts: 159
|
I have read that there is a setting to lower the chimes on the MyLink unit. Or others have said to turn down gain settings. Not sure if any of those options will work for you. Not sure what else to advise to help. Hopefully other forum mbrs will post suggestions.
|
04-26-2018, 01:38 PM | #6 |
Pride and Joy
Drives: 2014 Camaro SS2 Spring Edition Join Date: Dec 2016
Location: NEW JERSEY
Posts: 18
|
Yea I had to lower the gain a little bit
|
|
|
|
|