Vengeance Racing Introduces KAOTIC S/C Kit for 2010+ Camaro!! GRAPH/PICS/VIDEO - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Kevin@V · 01-19-2012, 01:29 PM

INTRODUCING
Vengeance Racing's
KaotiK
Package

Our Brand New Stage 2 Supercharger Kit
is now available for your 5th Gen Camaro!

PACKAGE INCLUDES:

Whipple 2.9L Supercharger
3.5" Pulley
Optional Carbon Jack Shaft Cover and Inlet Tube
VR Stage 3 Blower Cam Kit PLUS (which also includes)
TrickFlow 5/16th Hardened Pushrods
VR Dual Spring Kit with Ti Retainers
Melling Hi Volume Oil Pump
Katech C5R Timing Chain
LS7 Timing Gear
Comp Trunion Kit for Stock Rockers
All Gaskets, Seals and Bolts (GM and ARP)
American Racing Headers Full Exhaust System (1 7/8"x 3")
American Racing Axle Back Exhaust
Pfadt Coilover Suspension with Adjustable Sway Bars
MGW Shifter
RPS Street Twin Full Carbon Clutch
C6 Slave Adapter
Kenny Bell Boost-a-Pump for Forced Induction-40 amp
Flow Matched 60lb/hr Fuel Injectors
DSS 1400HP Stage 5 Axles
Vengeance Racing Spark Plug Wires
NGK TR6 Spark Plugs
Hawk Ceramic Brake Pads
Stainless Brake Lines
GM 2 bar Map Sensor
Vengeance Racing T Shirt & Carbon Fiber Decal

VR 5th Gen Camaro KaotiK Package-
$18,899 Parts Only
$23,499 Installed and Tuned

DYNO GRAPH:

VENGEANCE RACING
LSX Performance Professionals
Shop online at
www.VengeanceRD.com/Ecart
or call
678-513-7105
FaceBook Page | YouTube Channel

Watch Vengeance Racing In Action

MANNYS2SS/RS · 01-19-2012, 02:26 PM

Wow Kevin nice numbers is that the cam you sent me.

Kevin@V · 01-19-2012, 03:08 PM

Quote:

Originally Posted by MANNYS2SS/RS

Wow Kevin nice numbers is that the cam you sent me.

YES SIR IT IS!!!

camslambam · 01-19-2012, 03:18 PM

How have the stock bottom ends been handling 12 psi?

Zman12 · 01-19-2012, 03:49 PM

Question
Package shows with a Bap but video shows LPE dual setup? Ate using the Bap with this?

NYJETSFAN · 01-19-2012, 04:33 PM

Sounds badazz..

10aSSee D · 01-19-2012, 05:48 PM

Wow!!! Great torque numbers.

navyblueSS · 01-19-2012, 07:20 PM

Nice!

skip1718 · 01-19-2012, 07:27 PM

i am half way there.

Firefighter Batts · 01-19-2012, 09:26 PM

Kevin I can't wait, hope mine sounds and runs as strong.

ken53007 · 01-20-2012, 09:33 AM

nice setup sounds great!!

Kevin@V · 01-20-2012, 09:40 AM

Quote:

Originally Posted by camslambam

How have the stock bottom ends been handling 12 psi?

They hold up great!! LS3 Internals are stout from the factory! There's a lot of help in the tune. Some customers have added a meth kit for extra safety measure, and of course helps to make more power.

Quote:

Originally Posted by Zman12

Question
Package shows with a Bap but video shows LPE dual setup? Ate using the Bap with this?

I'm glad you noticed this and asked about it! The customer plans to exceed the power that he's making now and opted for the optional upgrade to the LPE twin fuel pump kit. However the Boost-a-Pump is more than capable for this amount of power.

Quote:

Originally Posted by skip1718

i am half way there.

Yes sir you are!! In fact, I just heard your car on the dyno on the opposite side of the shop! I'll see you this afternoon for pickup!.... a little birdie told me she made 477!

Quote:

Originally Posted by Firefighter Batts

Kevin I can't wait, hope mine sounds and runs as strong.

NO WORRIES THERE! You're gonna have a lot of power on your hands soon!

MANNYS2SS/RS · 01-22-2012, 10:53 AM

Kevin great numbers on skip1718 car 477 rwhp, did you use the above cam?

Kevin@V · 01-22-2012, 01:47 PM

Quote:

Originally Posted by MANNYS2SS/RS

Kevin great numbers on skip1718 car 477 rwhp, did you use the above cam?

Yes sir! Skip1718 is working towards a Whipple build on his car so he went with this cam and as you see it also works GREAT with a N/A setup also!

01-19-2012, 02:26 PM	#2
MANNYS2SS/RS Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010 Location: South Florida Posts: 1,237	Wow Kevin nice numbers is that the cam you sent me. __________________ LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi

01-19-2012, 03:49 PM	#5
Zman12 Drives: 2010 Camaro 2SS Join Date: May 2011 Location: Gardner,Ks Posts: 490	Question Package shows with a Bap but video shows LPE dual setup? Ate using the Bap with this? __________________ Whipple,custom cam,CAI,Kooks,Pedders and PFADT 626RWHP 549TQ ..

01-19-2012, 05:48 PM	#7
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Wow!!! Great torque numbers. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

01-19-2012, 07:20 PM	#8
navyblueSS Drives: 2002 Camaro SS Join Date: Jul 2009 Location: Quitman, LA Posts: 609	Nice! __________________ 2015 1LE - CAI intake, TSP longtubes, NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms

01-19-2012, 07:27 PM	#9
skip1718 Drives: 2011 2SS green w/black rally strips Join Date: Feb 2011 Location: Loganville Posts: 196	i am half way there. __________________ 2011 2SS SGM M6 675 RWHP 618 TQ CAI air induction, ARH 1-7/8 Headers, high flow cats, X-pipe, Whipple Super Charger 10 lbs of boost Stage 3 blower cam and DMH cutouts vengeance EFI Live tune pfadt stage 2 suspension. Drop springs and sway bars Granatelli 1G suspension package RX Catch Can

01-19-2012, 03:18 PM	#4
camslambam Account Suspended Drives: 2010 SS, 06 SRT10 Ram Join Date: Nov 2011 Location: C. America Posts: 1,658	How have the stock bottom ends been handling 12 psi?

01-19-2012, 04:33 PM	#6
NYJETSFAN El Hefe Drives: Black Camaro 2SS/RS Join Date: Jul 2010 Location: Maryland Posts: 1,067	Sounds badazz..

01-19-2012, 09:26 PM	#10
Firefighter Batts Drives: 2012 45th anniversary Camaro SS Join Date: Dec 2011 Location: Griffin, GA Posts: 28	Kevin I can't wait, hope mine sounds and runs as strong. __________________ In loving memory of, Johnni Mae Batts 10/4/51-10/27/11

01-20-2012, 09:33 AM	#11
ken53007 Drives: 2010 camaro ss Join Date: Dec 2010 Location: acworth ga Posts: 1,721	nice setup sounds great!!

01-22-2012, 10:53 AM	#13
MANNYS2SS/RS Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010 Location: South Florida Posts: 1,237	Kevin great numbers on skip1718 car 477 rwhp, did you use the above cam? __________________ LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	467	06-11-2013 09:45 PM
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
Vengeance Racing \| Limited Edition 2010 Camaro Package	Ron@Vengeance	Camaro Photos \| Spyshots \| Video \| Media Gallery	3	06-16-2010 08:56 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM