"The Shop" Finally - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JusticePete · 08-08-2011, 11:07 AM

Quote:

Originally Posted by mws444

Once they finish the power trowel......water and lots of it! I figure we are putting on about 1,000 gallons every two hours.

I think my gate guards (the ones wetting it down) hate this shop about now. Since I have to keep it wet for seven days I may just shovel a border around it and flood it. We are topping out at 103 today, how bad is it in the Hill Country?

We share the same hot box. We are lucky we are not in Dallas!

mws444 · 08-08-2011, 05:46 PM

Yeah, I feel for my fellow Texans. I saw where Houston hit 110 the other day, I used to live there and 95 was Tarzan hot....110 has to be dangerous!

mws444 · 08-08-2011, 05:50 PM

Final pour went off without a hitch. Looks like next Monday they will start puting up the building. They are telling me 3 weeks to get the building up then I can start on the interior.

GhostRS · 08-09-2011, 01:58 PM

Looking good man

Finished product should be awesome!

mws444 · 08-09-2011, 09:23 PM

Quote:

Originally Posted by GhostRS

Looking good man

Finished product should be awesome!

Hey Thanks for your service!!! PM me your APO shipping info and I will get a little taste of home sent over to you if you promise to share with your buds over there.

JusticePete · 08-09-2011, 09:27 PM

Quote:

Originally Posted by mws444

Hey Thanks for your service!!! PM me your APO shipping info and I will get a little taste of home sent over to you if you promise to share with your buds over there.

Mojave · 08-10-2011, 01:04 PM

That is so cool and I am so jealous !

Mr Twisty · 08-12-2011, 07:18 PM

Maybe one of the mods could rename your thread "ShopZilla"

PIANOMN · 08-14-2011, 04:06 PM

For that "barn party" grand opening get in touch with me about music! Can perform solo or get a band together for the event

mws444 · 08-14-2011, 06:02 PM

Quote:

Originally Posted by PIANOMN

For that "barn party" grand opening get in touch with me about music! Can perform solo or get a band together for the event

I like the way you think!

mws444 · 08-15-2011, 07:50 PM

WoooHooo progress! The crew got two bays up today, only three more to go. Looks like they might start sheeting the sides by the end of the week.

JusticePete · 08-15-2011, 10:23 PM

Looking good Mike, real good.

mws444 · 08-17-2011, 09:18 PM

Man this crew is kicking butt and taking names. They should start sheeting on Monday.
Man I am getting excited about all of this now.

JusticePete · 08-17-2011, 09:38 PM

When so we can all plan our road trip is the Grand Openning?

08-08-2011, 05:46 PM	#30
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Yeah, I feel for my fellow Texans. I saw where Houston hit 110 the other day, I used to live there and 95 was Tarzan hot....110 has to be dangerous! __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

08-08-2011, 05:50 PM	#31
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Final pour went off without a hitch. Looks like next Monday they will start puting up the building. They are telling me 3 weeks to get the building up then I can start on the interior. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

08-10-2011, 01:04 PM	#35
Mojave San Diego Head Tuners Drives: 2016 Camaro 1SS ,NPP,MagRide, A8 Join Date: May 2009 Location: Temecula, CA Posts: 2,440 View My Garage	That is so cool and I am so jealous ! __________________ 2016 1SS A8, NPP, MagRide, Black Rims My 5th Camaro (3 Gen5, 1 Gen4) Member of San Diego Head Tuners https://www.youtube.com/c/MojaveKY https://www.instagram.com/mojaveky/ https://twitter.com/MojaveKY http://dinowax.refr.cc/bryanm 15% off DinoWax orders

08-12-2011, 07:18 PM	#36
Mr Twisty Drives: the 2nd amendment home Join Date: May 2008 Location: OK Posts: 14,707	Maybe one of the mods could rename your thread "ShopZilla" __________________ "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Benjamin Franklin

08-14-2011, 04:06 PM	#37
PIANOMN Epic; Winning! Drives: 2010 1SS ABM Join Date: Feb 2011 Location: Las Cruces NM Posts: 595	For that "barn party" grand opening get in touch with me about music! Can perform solo or get a band together for the event __________________ 1SS ABM LS3 Lots of parts from SouthwestSpeed... Thanks Ivan!!

08-09-2011, 01:58 PM	#32
GhostRS Veteran Drives: BLK 2010 2SS/RS Join Date: Apr 2010 Location: Empire State Posts: 441 View My Garage	Looking good man Finished product should be awesome!

08-15-2011, 07:50 PM	#39
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	WoooHooo progress! The crew got two bays up today, only three more to go. Looks like they might start sheeting the sides by the end of the week. Attached Images __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

08-15-2011, 10:23 PM	#40
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Looking good Mike, real good.

08-17-2011, 09:18 PM	#41
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Man this crew is kicking butt and taking names. They should start sheeting on Monday. Man I am getting excited about all of this now. Attached Images __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

08-17-2011, 09:38 PM	#42
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	When so we can all plan our road trip is the Grand Openning?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New to the family. Finally got mine!	BA RS	Camaro Photos \| Spyshots \| Video \| Media Gallery	17	05-03-2011 08:42 PM
Finally ordered, finally posting.	SolidGoldBomb	5th Gen Camaro SS LS LT General Discussions	29	04-21-2011 01:07 AM
It's Here...It's finally freakin here!!!!!	blkonblk	Canada	34	06-13-2009 07:31 AM
The final ARRRGHH Thread (really!). I finally get mine Monday. Pics/Vid comning.	2Muchmark	5th Gen Camaro SS LS LT General Discussions	33	06-08-2009 08:49 PM
Detroit's 3 finally on track, tough critic says	TAG UR IT	General Automotive + Other Cars Discussion	1	10-14-2007 12:16 PM