Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Roto-Fab
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 06-29-2018, 04:09 PM   #1
LCPLPunk
Formerly 5LAVE1
 
LCPLPunk's Avatar
 
Drives: 2010 Camaro SS/2SS
Join Date: Jul 2016
Location: Near DC
Posts: 1,043
What should I replace when doing rear shocks?

Hey guys,

So I have 1LE rear shocks to go on and I need to know what else I should replace while i'm there. I did my fronts a month ago and the strut mounts and rear isolators were shot. Should I replace the rear shock mounts?

I'm going to replace the isolators anyway because my front ones were garbage and I'm sure the rears are the same.
__________________
R2C Cold Air Intake / VMAX Throttle Body / Speed Engineering LTHs / DynoSteve tuned / Z28 Replicas in rear (275 square)/ 1LE Suspension / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket / B&M Tranny Cooler / RX Catch Can / Jannetty Transmission Dipstick
LCPLPunk is offline   Reply With Quote
Old 06-29-2018, 11:28 PM   #2
olblue75


 
olblue75's Avatar
 
Drives: 2010 2SS/RS
Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 4,203
There is a specific 1LE upper shock mount.
__________________
Orange Krush II
1LE Front sway bar with DSE Links, Splitter, 3.91 Gears and Axles, 14/15 Heat extractor, shocks and struts, Suede Flat bottom Steering wheel, short throw shifter with the Pegasus rear poly shifter mount, diffuser with dual mode mufflers, ZL1 Rockers, Belly Pan and pedals, Z/28 Intake, Headers, Cats,Toe Rods and UCA Bushings, 1 piece DSS Drive Shaft, C7 Z06 Vented Piston Calipers with CTS-V Rotors, PAFDT Solid Cradle bushing, 32mm JPSS Rear Bar, and Skip Shift eliminator. ASC race spec splitter and wicker. 6th Gen M017 Wheels.
olblue75 is offline   Reply With Quote
Old 06-30-2018, 06:39 AM   #3
LCPLPunk
Formerly 5LAVE1
 
LCPLPunk's Avatar
 
Drives: 2010 Camaro SS/2SS
Join Date: Jul 2016
Location: Near DC
Posts: 1,043
Ya, and I was going to buy them, but one is $35 and the other is like $70. I just decided to replace with new stockers since my car is now 8 years old and has 66k miles.
__________________
R2C Cold Air Intake / VMAX Throttle Body / Speed Engineering LTHs / DynoSteve tuned / Z28 Replicas in rear (275 square)/ 1LE Suspension / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket / B&M Tranny Cooler / RX Catch Can / Jannetty Transmission Dipstick
LCPLPunk is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.