DIY: ZL1 pull-strap for your trunk - Page 4

Markoz28 · 08-26-2018, 10:15 AM

Quote:

Originally Posted by speedraider

exactly what I have been doing

X2 been doing this

krazyk86cu · 08-30-2018, 01:40 AM

Finally got around to doing this. Works like a charm!

JonDaddy82 · 09-06-2018, 06:54 PM

Anyone had the factory screw too short to thread back in?

Sakudog · 09-07-2018, 12:37 PM

Quote:

Originally Posted by JonDaddy82

Anyone had the factory screw too short to thread back in?

Yeah, some people have. Options include use a vice to smash the rivet holes, or remove one of the rivets.

*mlee* · 09-07-2018, 01:50 PM

Very nice... this would work on any car. Not just a ZL1

OVERPAR73 · 09-07-2018, 08:49 PM

Got mine done also, had to modify the strap bracket a little bit to fit just right.

URBAN LEGEND · 09-08-2018, 12:39 PM

Quote:

Originally Posted by mlee

Very nice... this would work on any car. Not just a ZL1

Good point.

Joszer · 09-08-2018, 05:00 PM

I managed to do this with a $3 tie down strap I got from Home Depot. Took 10 minutes.

777Jackpot777 · 09-08-2018, 05:00 PM

OP I know this is off topic, but you tail lights look phenomenal where to I get those or what do I need to do in order for them to look like yours?

Thanks in advance!

Can'tHave2MuchHP · 09-08-2018, 05:23 PM

Quote:

Originally Posted by 777Jackpot777

OP I know this is off topic, but you tail lights look phenomenal where to I get those or what do I need to do in order for them to look like yours?

Thanks in advance!

Those are OEM ZL1 1LE taillights. They're made by GM and can be purchased through a GM dealer, parts department, Wildhammer, Phastek, etc.

Part number for pair of taillights: 84136777
Part number for 3rd brake light: 84330249

Also look at the Diode Dynamic dark sidemarkers. They match them dead on and complete the look, especially on white.

777Jackpot777 · 09-08-2018, 08:56 PM

Quote:

Originally Posted by Can'tHave2MuchHP

Those are OEM ZL1 1LE taillights. They're made by GM and can be purchased through a GM dealer, parts department, Wildhammer, Phastek, etc.

Part number for pair of taillights: 84136777
Part number for 3rd brake light: 84330249

Also look at the Diode Dynamic dark sidemarkers. They match them dead on and complete the look, especially on white.

Thanks Im looking to achieve the same look.

OPP · 09-12-2018, 05:16 PM

How about using this instead?
Kaizen Reflective Universal Skull Racing Tow Strap JDM Towing Strap Punisher Bumper Towing Set for Front Or Rear Bumper Towing Hook (Red) https://www.amazon.com/dp/B072C462WW..._U.yMBb7X7R1TZ

Sakudog · 09-12-2018, 09:41 PM

Quote:

Originally Posted by OPP

How about using this instead?
Kaizen Reflective Universal Skull Racing Tow Strap JDM Towing Strap Punisher Bumper Towing Set for Front Or Rear Bumper Towing Hook (Red) https://www.amazon.com/dp/B072C462WW..._U.yMBb7X7R1TZ

Personally, I think the "Jake" Skull thing is played out, but to each their own.

Sakudog · 09-12-2018, 09:42 PM

Quote:

Originally Posted by Joszer

I managed to do this with a $3 tie down strap I got from Home Depot. Took 10 minutes.

ha, I mean.. it is a Camaro but Home Depot tie down strap?

08-30-2018, 01:40 AM	#44
krazyk86cu Drives: 18 Red Hot ZL1 10A Join Date: Aug 2018 Location: Triangle-Triad NC Posts: 13 View My Garage	Finally got around to doing this. Works like a charm! __________________ Red Hot ZL1 \| 10A \| CF Hood Insert \| PDR \| Nav \| Sunroof \| Roto-Fab \| Ryker Mod

09-06-2018, 06:54 PM	#45
JonDaddy82 Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017 Location: Nolensville, TN Posts: 618	Anyone had the factory screw too short to thread back in? __________________ 1989 Forumla 350 WS6 <- High School 2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily

09-07-2018, 01:50 PM	#47
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,501 View My Garage	Very nice... this would work on any car. Not just a ZL1 __________________

09-07-2018, 08:49 PM	#48
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,471 View My Garage	Got mine done also, had to modify the strap bracket a little bit to fit just right. __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

09-08-2018, 05:00 PM	#50
Joszer Drives: 2018 ZL1 1LE Join Date: Feb 2018 Location: CA Posts: 52	I managed to do this with a $3 tie down strap I got from Home Depot. Took 10 minutes. Attached Images

09-08-2018, 05:00 PM	#51
777Jackpot777 Drives: 2018 ZL1, 2018 Tahoe RST Edition Join Date: Aug 2018 Location: Orlando FL Posts: 106	OP I know this is off topic, but you tail lights look phenomenal where to I get those or what do I need to do in order for them to look like yours? Thanks in advance!

09-12-2018, 05:16 PM	#54
OPP Drives: 2018 MBM ZL1 Auto Join Date: Sep 2009 Location: San Juan, Puerto Rico Posts: 960 View My Garage	How about using this instead? Kaizen Reflective Universal Skull Racing Tow Strap JDM Towing Strap Punisher Bumper Towing Set for Front Or Rear Bumper Towing Hook (Red) https://www.amazon.com/dp/B072C462WW..._U.yMBb7X7R1TZ __________________ .

User Name		Remember Me?
Password