10-27-2014, 08:55 AM | #15 |
Drives: 2013 TT ZL1 Join Date: Jun 2013
Location: NorCal
Posts: 849
|
I just saw this, maybe I'll come down there & try to break my ZL1 1/2 mile record.
__________________
|
10-27-2014, 09:06 AM | #16 |
"Cam Only"
|
You should ma, sign up and come down! You ran at the shift sector event and trapped like 170something right?
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
10-27-2014, 11:36 AM | #17 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
I was tempted to sign up. I have followed it since reading the post and videos last year. I have to have work done on my ZL1 before any speed events.The rear end is starting to howl slightly on 180 turns, it's still under warranty. Brakes and an oil change and I'm back to normal.
|
10-27-2014, 12:04 PM | #18 |
Drives: 2013 TT ZL1 Join Date: Jun 2013
Location: NorCal
Posts: 849
|
Yeah I set the record at 173.6 mph in May.
__________________
|
10-27-2014, 01:45 PM | #19 |
"Cam Only"
|
Then sign up and try to beat it again haha
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
10-27-2014, 01:52 PM | #20 |
Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014
Location: Fresno, CA
Posts: 927
|
Did any of you guys to Shift S3ctor yesterday? It's pretty much the same thing. There was a bunch of 2000+ hp Lambos, GTRs, Ford GTs. The fastest 1/2 mile run was 230mph in a 2600 HP Gallardo.
__________________
2015 Summit White 1SS, 1LE, Recaros, NPP
498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit | Stand Alone Fuel Cell w/ C16 | Custom Grind Cam | Stainless Power 1 7/8 LT Headers | CAI Intake | ATI Super Damper | BMR Trailing Arms & Toe Links | Prothane Polyurethane Sub-frame Bushings | JDP Upper Control Arm Bushings | MT Drag Radials | Tuned by SS Motorsports Youtube Channel: Click Here |
10-27-2014, 04:22 PM | #21 | |
"Cam Only"
|
Quote:
At this event you can get 30 passes in easily if you'd like to. And it's a laid back atmosphere.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
10-27-2014, 06:02 PM | #22 | |||
Drives: 18 ZL1 A10 & 18 2500HD Duramax Join Date: Oct 2012
Location: Chicago, IL
Posts: 733
|
Quote:
Quote:
Quote:
My ZL1 is doing the same thing.. It seems pretty common for ZL1's. Keep me posted on what the dealer does.
__________________
Procharged 2018 ZL1 A10
2018 2500HD Duramax Last edited by TripleBlkZL1; 10-27-2014 at 07:05 PM. |
|||
10-27-2014, 06:11 PM | #23 |
Drives: 2006 Z06 Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,712
|
Josh, come do the Arizona event.
__________________
Nick
Corvette Z06 -1200ish rwhp |
10-28-2014, 11:09 AM | #24 |
Drives: 96 camaro Join Date: May 2009
Location: Shafter, CA
Posts: 137
|
What time does this event start?
|
10-28-2014, 01:28 PM | #25 |
Drives: ford Join Date: Oct 2014
Location: mr
Posts: 4
|
I am going for sure. Car only has 600 miles so don't think she will be broken in by the time this rolls around. I know get out and drive.
|
10-28-2014, 02:38 PM | #26 |
"Cam Only"
|
Gates open around 6 something AM. Racing starts around 8ish in the AM.
Run until the sun goes down. Sign up!
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
10-30-2014, 02:04 PM | #27 |
Drives: 2014 ZL1 Join Date: Apr 2014
Location: San Diego, CA
Posts: 86
|
I'm in and rolling stock! Should be fun
__________________
2014 Ashen Grey Metallic ZL1
|
10-30-2014, 03:05 PM | #28 |
"Cam Only"
|
Thank god. Will be nice to see more Camaro's there.
I knew people with ZL1's would actually run their cars instead of just going on cruises and doing car shows lmao
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) Last edited by Jeff_SS; 10-30-2014 at 03:18 PM. |
|
|
|
|