10-08-2010, 12:17 PM | #1 |
|
hardened halfshafts?
Now that I have 660rwhp and 612rwtq I need to look at putting hardened halfshafts on and was wondering if anyone else has replaced the factory ones yet and if so what brands did y'all use and are they holding up to the punishment? I would also like to know if y'all changed out the gears in the rear end as well.
I know once I put slicks on my car and it hooks up that the stock halfshafts arent gonna last to long. thanks in advance
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ
T |
10-08-2010, 12:30 PM | #2 |
Banned
Drives: 2011 Avenger Heat Join Date: Nov 2009
Location: Oregon
Posts: 1,697
|
With that level of power..I would have done it already.
|
10-08-2010, 12:36 PM | #3 |
Drives: Me 2001 F150, The wife '11 2SS RS Join Date: Aug 2010
Location: Maryland
Posts: 532
|
Drop a little viagra in the gas tank and that should do it
|
10-08-2010, 12:44 PM | #4 |
|
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ
T |
10-08-2010, 12:46 PM | #5 |
|
I just got it back maybe 2 weeks ago so thats why it hasnt been done yet and after driving it for the couple days i have had it back i know it REALLY needs to be done
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ
T |
10-08-2010, 12:50 PM | #6 |
Drives: Me 2001 F150, The wife '11 2SS RS Join Date: Aug 2010
Location: Maryland
Posts: 532
|
Not to get off the subject but what mods have you done to get that power?
|
10-08-2010, 01:01 PM | #7 |
|
ARH LT headers, rotofab CAI, cam, maggie S/C, upgraded fuel system, and ofc a tune
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ
T |
10-09-2010, 10:51 AM | #8 |
Drives: Parts Taxi Join Date: Sep 2010
Location: Lewes DE
Posts: 268
|
|
10-09-2010, 11:35 AM | #9 |
Drives: 2014 Sonic, 2010 Camaro SS Join Date: Jan 2009
Location: Gig Harbor, WA
Posts: 2,453
|
Sounds like a broken axle until he gets that worked out. Don't forget the one piece drive shaft.
__________________
|
10-09-2010, 12:07 PM | #10 | |||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
Quote:
Uncle Robin runs the stock rear axles with slicks on his 6XX rwhp LSA powered camaro. and he's cutting 1.60 60's with slicks...
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
|||
10-09-2010, 12:17 PM | #11 |
Search Ninja
Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009
Location: Central Ark
Posts: 7,183
|
There are several companies making stronger half shafts. Hennessey makes some and I can't think of the others. Since you're close to ADM and TSP, i'd check with them to see what they recommend.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train. |
10-09-2010, 12:54 PM | #12 |
Drives: 2014 Sonic, 2010 Camaro SS Join Date: Jan 2009
Location: Gig Harbor, WA
Posts: 2,453
|
Uncle Robin is a professional! His launch was one of the smoothest I have ever seen. The front end just picked up and the car motivated forward smoothly without any bumps or jerks. Thats why he can run stock axles.
__________________
|
10-09-2010, 12:58 PM | #13 |
Caspers2SSRS
Drives: Summit White 2010 2SS/RS Camaro Join Date: Jul 2010
Location: Somewhere north of a midlife crisis.
Posts: 2,865
|
|
10-09-2010, 01:07 PM | #14 |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
GForce1320, Hendrix, Drive Shaft Shop
I personally am using GForce1320. |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I am a hardened CRIMINAL!!!!!!!!!!! | gabraddock | USA - California | 102 | 06-23-2010 07:45 PM |
hardened wheel studs? | boostedyards86 | Dragstrip and Launch Techniques Discussion | 1 | 10-27-2009 11:33 PM |