Power Steering Inlet Fitting Question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

riki3fan · 02-19-2014, 08:37 PM

I have a small weep at the power steering inlet. Does anyone on here happen to know the dimensions of the O-ring at this point? Diameter and thickness would be most helpful. I'd like to know before pulling the pump. Could save me a ton of time.

Thanks in advance!

Sikoriko · 02-20-2014, 03:41 PM

OEM from the dealer. It's looks like metric, tried an standard will not work

02-19-2014, 08:37 PM	#1
riki3fan Camaro Obsessed Drives: 2010 ABM 2SS/RS Supercharged A6 Join Date: Mar 2011 Location: Fort Lupton, CO Posts: 224 View My Garage	Power Steering Inlet Fitting Question I have a small weep at the power steering inlet. Does anyone on here happen to know the dimensions of the O-ring at this point? Diameter and thickness would be most helpful. I'd like to know before pulling the pump. Could save me a ton of time. Thanks in advance! __________________ *Riki* driving *SSafire, a New-to-Me 2010 2SS/RS A6 ABM w/Ghost Rally Stripes* Mods done before I got her: Vortech V3 Supercharger, full exhaust, high flow cats, LTH, trailing arms, tow rods and anti-sway bars, window tint, body kit - I've since added Drag Radials Mods Up Next: Linelock, upgraded air filter, heat shield Dyno 601 RWHP 8/20/2019 - Purchased from fellow CCOTR member, who purchased from another CCOTR member in 2015 *Gone to a new home: Nadia-2014 2SS/RS A6 IBM* *Gone to a new home: Eva-2011 2LT/RS M6 IBM Supercharged!*

02-20-2014, 03:41 PM	#2
Sikoriko Drives: 2011 V6 IOM Join Date: Jul 2012 Location: San Diego Posts: 1,385 View My Garage	OEM from the dealer. It's looks like metric, tried an standard will not work