2013 Inferno Metallic Orange 1LE: Photoshoot! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Lio Martinez · 10-06-2018, 03:30 PM

Here are a few pics talents during lasts Saturdays photo and video shoot. I think they came out pretty darn good. Yes I do get crap on my car all the time that is a busy car to look at, so much shit I hand on it, been called the Autozone Sponsorship or special . But at the end I know I put nothing but good parts of reputable companies. The car is for me and my liking I’m just sharing pics just like everyone else is . The car in not just show and go it’s actuskky been Modified up and down, from engine , suspension , brakes etc. Hope you guys like it .

Lio Martinez · 10-06-2018, 04:13 PM

Here are a few more

Tyestick · 10-08-2018, 02:39 AM

That, my friend, is a very busy looking 1LE. Lots going on.

Billy10mm · 10-08-2018, 09:41 AM

I'll say this Lio. I'm a 41-year old purist. I care very little for how a car looks, and care much more about how a car feels to me as a driver, how it sounds, and how well it handles. Case in point, my 1LE is my daily driver, it sits outside (I don't have a garage) and the last time I washed it was in April. I've never cleaned the engine bay, not in 4 years and almost 50K miles.

So normally, when I see aesthetically-modified cars, I don't get it. I would much rather spend my money on tires, brakes, and track time. But with all of that said, your car looks damned good. I hate when people take a great looking car like the 1LE and stick some big ass wing on it that looks out of place, but you touched the ENTIRE car. The whole thing has has the same level of aggressiveness from the tip of the front lip, to the back of rear wing. I wouldn't spend my money the same way, but I do like your car.

Chevyjk33 · 10-08-2018, 12:01 PM

I like it! Yeah, there's a lot going but its all been done well. Does not look like a catalog car to me and certainly not an Autozone car.

1LeSS · 10-09-2018, 06:00 PM

Great job Leo. I've followed you from the start and think that car rocks. Still running the turbos up front?
Also where did you get the frontend wind deflectors, Called canards maybe?

Great job

Panda1LE · 10-11-2018, 02:35 PM

badass, def one of if not my fav 5th gen.

Lio Martinez · 10-13-2018, 04:22 PM

Here is the engine bay and interior pics.

Glassman66 · 01-13-2019, 11:35 AM

I like it a ton. I love when someone's got a pair of balls and could give a f___ what others think. Badass

George-CZ · 01-13-2019, 01:58 PM

In this mask you look like the idiot (sorry for honesty), but your Camaro is one the best ever I seen!!!

CamaroDreams76 · 01-13-2019, 01:59 PM

I like it. Always have, since you first bought it.

Vjc834 · 02-11-2019, 06:11 PM

I like it a lot but opted to keep mine as close to original as possible.

WHAMMO · 02-25-2019, 06:22 PM

Really impressive brother!! Busy looking, but I like it!! I LOVE THE STEERING WHEEL!! Where you got it done?

datagram940 · 09-11-2020, 02:08 PM

Quote:

Originally Posted by Lio Martinez

Here are a few more

Where Did you get that three canards????????

Very cool car!!!!

10-06-2018, 03:30 PM	#1
Lio Martinez Account Suspended Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011 Location: Oxnard. CA Posts: 1,747 View My Garage	2013 Inferno Metallic Orange 1LE: Photoshoot! Here are a few pics talents during lasts Saturdays photo and video shoot. I think they came out pretty darn good. Yes I do get crap on my car all the time that is a busy car to look at, so much shit I hand on it, been called the Autozone Sponsorship or special . But at the end I know I put nothing but good parts of reputable companies. The car is for me and my liking I’m just sharing pics just like everyone else is . The car in not just show and go it’s actuskky been Modified up and down, from engine , suspension , brakes etc. Hope you guys like it . Attached Images

10-06-2018, 04:13 PM	#2
Lio Martinez Account Suspended Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011 Location: Oxnard. CA Posts: 1,747 View My Garage	Here are a few more Attached Images

10-08-2018, 09:41 AM	#4
Billy10mm Drives: 2014 Camaro 2SS 1LE NPP Join Date: Nov 2013 Location: Hartsdale, NY Posts: 1,434	I'll say this Lio. I'm a 41-year old purist. I care very little for how a car looks, and care much more about how a car feels to me as a driver, how it sounds, and how well it handles. Case in point, my 1LE is my daily driver, it sits outside (I don't have a garage) and the last time I washed it was in April. I've never cleaned the engine bay, not in 4 years and almost 50K miles. So normally, when I see aesthetically-modified cars, I don't get it. I would much rather spend my money on tires, brakes, and track time. But with all of that said, your car looks damned good. I hate when people take a great looking car like the 1LE and stick some big ass wing on it that looks out of place, but you touched the ENTIRE car. The whole thing has has the same level of aggressiveness from the tip of the front lip, to the back of rear wing. I wouldn't spend my money the same way, but I do like your car. __________________ My thoughts on some things: Driving Nannies: If I'm that far out of shape on the street, something has gone terribly wrong and by all means Mr. Computer man, come and get me. G2s: Rock throwing is like like a tramp stamp; although problematic, it's a sign of good things to come.

10-09-2018, 06:00 PM	#6
1LeSS Drives: 2013 2SS/RS VR 1LE Join Date: Jan 2013 Location: Prince George, B.C. Posts: 486	Great job Leo. I've followed you from the start and think that car rocks. Still running the turbos up front? Also where did you get the frontend wind deflectors, Called canards maybe? Great job __________________ BC Racing coil-overs, 32ml rear sway bar, Solid cradle bushing kit, Steel jacket radius rod bushes, JPSS caster bolt, Bo White TB, Granitelli HP coils, Apex Catchcan, Vortech V7 Ysi Supercharger, LSX B-15 engine, custom spec cam, and other stuff.

10-13-2018, 04:22 PM	#8
Lio Martinez Account Suspended Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011 Location: Oxnard. CA Posts: 1,747 View My Garage	Here is the engine bay and interior pics. Attached Images

10-08-2018, 02:39 AM	#3
Tyestick Drives: 19’ Camaro SS 1LE Join Date: Nov 2016 Location: SoCal Posts: 309	That, my friend, is a very busy looking 1LE. Lots going on.

10-08-2018, 12:01 PM	#5
Chevyjk33 Drives: 2015 Camaro 2SS 1LE Join Date: Mar 2017 Location: Stow Ohio Posts: 43	I like it! Yeah, there's a lot going but its all been done well. Does not look like a catalog car to me and certainly not an Autozone car.

10-11-2018, 02:35 PM	#7
Panda1LE Drives: 2013 2SS/RS 1LE (6spd) Join Date: Mar 2018 Location: Temecula, CA Posts: 281	badass, def one of if not my fav 5th gen.

01-13-2019, 11:35 AM	#9
Glassman66 Drives: 2014 Camaro 2SS/RS 1le Join Date: Jan 2017 Location: Denver Co Posts: 260	I like it a ton. I love when someone's got a pair of balls and could give a f___ what others think. Badass

01-13-2019, 01:58 PM	#10
George-CZ Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018 Location: Czech Republic Posts: 1,591	In this mask you look like the idiot (sorry for honesty), but your Camaro is one the best ever I seen!!!

01-13-2019, 01:59 PM	#11
CamaroDreams76 Tri-County Camaro SWFL Drives: 2013 IOM 2SS/RS/1LE Join Date: Apr 2013 Location: South West FL Posts: 3,072 View My Garage	I like it. Always have, since you first bought it. __________________ Just bolt ons........ https://www.camaro5.com/forums/showthread.php?t=343023

02-11-2019, 06:11 PM	#12
Vjc834 Drives: 2013 2SS 1LE Join Date: Jul 2013 Location: South Jersey Posts: 203 View My Garage	I like it a lot but opted to keep mine as close to original as possible.

02-25-2019, 06:22 PM	#13
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,641	Really impressive brother!! Busy looking, but I like it!! I LOVE THE STEERING WHEEL!! Where you got it done? __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me.