You are browsing camaro5 
 |
|
09-10-2021, 03:32 PM
|
#1 | |
 Drives: 2017 1LT - Black Join Date: Sep 2021
Location: Louisville, KY
Posts: 12
|
Outer Window Trim
Do any of you know what the part numbers are for the left/right outer window trim pieces?
I'm talking about these: This is for a 2015 LS. 
|
|
|
|
|
09-10-2021, 04:14 PM
|
#2 |
|
Drives: 2017 1LT - Black Join Date: Sep 2021
Location: Louisville, KY
Posts: 12
|
Found them: 23112215 and 23112216
|
|
|
|
|
09-10-2021, 08:54 PM
|
#3 |
            
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,442
|
And they are quite expensive, last time I checked..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
 |
|
|
|
|
09-13-2021, 09:28 AM
|
#4 | |
|
Drives: 2017 1LT - Black Join Date: Sep 2021
Location: Louisville, KY
Posts: 12
|
Quote:
Yeah. Mine look like crap. Not sure how they got like that. I tried scrubbing them with Turtle Wax Ice or Simoniz Sure Shine. They look better for a while then go back to looking like this. Any suggestions on how to "fix" them? If not, will look into replacing. 
|
|
|
|
|
|
09-13-2021, 09:46 AM
|
#5 |
|
Give speed a chance
Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019
Location: Mesa, Az
Posts: 2,234
|
Try some of this from Mothers. When I got my Z it had some stubborn water stains on the window trim. This did the job. And when applying feel free to sing the similar titled song by AC/DC.
__________________
2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.
|
|
|
|
|
09-13-2021, 09:50 AM
|
#6 | |
|
Drives: 2017 1LT - Black Join Date: Sep 2021
Location: Louisville, KY
Posts: 12
|
Quote:
 ... thanks, will try that.
|
|
|
|
|
|
09-13-2021, 04:35 PM
|
#7 |
|
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,442
|
That's the product I use as well, works really good on all the black trim.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|
10-20-2021, 03:08 PM
|
#8 |
|
Drives: 2017 1LT - Black Join Date: Sep 2021
Location: Louisville, KY
Posts: 12
|
In case someone comes back to this post, Back-to-Black by itself didn't work. I tried it 3 times waiting a few days between application.
Then took some 400-grit sandpaper to it followed by Back-to-Black. They look like new now. 
|
|
|
|
|
10-20-2021, 04:48 PM
|
#9 | |
|
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,442
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|
|
10-25-2021, 10:17 AM
|
#10 |
 Drives: 2012 RSLT,1979 Trans Am Join Date: Jul 2012
Location: IRB.Florida
Posts: 291
|
I have had good results using TriNova plastic and trim restorer...good luck
|
|
|
|
|
10-25-2021, 11:13 AM
|
#11 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
What about the upper trim PN??
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
10-25-2021, 12:16 PM
|
#12 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
I cleaned mine with a Magic Eraser and some Back to Black as lube. You just have to be very careful you don't get anywhere near the paint with those erasers. I used painter's tape.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
10-25-2021, 05:48 PM
|
#13 |
 
Drives: 2010 Camaro 1SS Join Date: Nov 2015
Location: CA
Posts: 358
|
I have the same issue with my roof weather stripping. Might have to just wrap the roof pretty soon.
__________________
 |
|
|
|
|
|
|
|
 |
| Tags |
| camaro, part number, window |
|
|
