You are browsing camaro5 
 |
|
12-27-2019, 08:07 PM
|
#1 |
 |
Help with replacement bushing: Rear lower outer control arm Knuckle bushing
I hope someone can help. While installing BMR rear trailing arms, toe rods, cradle bushings.... We notice my rear lower outer control arm bushing that is located in the knuckle is in rough shape and needs replacing. Does GM or anyone make a replacement? We removed it easier that any of the other bushings, LOL, but no one seems to have a replacement or part#. All I seem to come up with is buying a whole knuckle just to get the bushings. Silly! Any suggestions would be appreciated.
Thanks to the person I copied this picture from!!! |
|
|
|
12-27-2019, 09:32 PM
|
#2 |
|
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
Check this out. Hope it helps.
https://www.suspension.com/superpro/spf2866k
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
|
|
|
|
12-28-2019, 04:19 PM
|
#3 | |
|
|
Quote:
|
|
|
|
|
|
12-28-2019, 05:16 PM
|
#4 | |
|
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
Quote:
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
|
|
|
|
|
08-24-2023, 07:38 AM
|
#5 |
|
No, it's not an SS
|
Hogiewan1
Did you replace the bushings and if so how difficult was it? Did you need to press them in? I ask because my car (2014 Camaro) failed inspection at the mechanic due to having a little bit of play in the rear knuckle bushings (I'm assuming the control or trailing arm bushing) Thanks Shel |
|
|
|
|
|
|
|
 |
|
|
