04-21-2017, 10:39 AM | #1 |
BUMBL Z
|
Door issues
Can someone confirm that the door position sensor is built into the lock actuator mechanism, aka this part? Car thinks my driver door is constantly open, and the window won't fully index back up.
http://www.autozone.com/electrical-a.../468502_2137_0
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
04-21-2017, 10:52 AM | #2 |
Drives: 2011 2SS/RS M6 Join Date: Oct 2015
Location: Utah
Posts: 1,940
|
it is.
|
04-21-2017, 10:58 AM | #3 |
BUMBL Z
|
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
09-15-2018, 12:50 PM | #4 |
Drives: 2010 camaro ss Join Date: Sep 2018
Location: Florida
Posts: 67
|
__________________
|
09-15-2018, 12:51 PM | #5 |
BUMBL Z
|
I had one of those courtesy lights installed on this car. There was a pinch in the wire shorting out the door position sensor. Hope you fix your problem
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|