How Do You Change front light bulbs on a 13 ZL!? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2013ZL1FUN · 08-23-2018, 11:49 PM

My daytime driving bulb is burned out on my passenger side. How do I get to it?

Vroom · 08-24-2018, 12:49 AM

Easy to do, just unscrew the wheel well liner and you can get you hand in there. Replace all the bulbs with the plasma ones. They look nicer. Search for your options.

2013ZL1FUN · 08-27-2018, 07:19 AM

I believe those are torx head screws? You can really get your hand up there? By the way I agree with the who needs mods thing!

evonschu · 08-30-2018, 05:22 PM

I stuck a roll of masking tape in between the liner and the fender after getting the screws off to hold it open while you dig in there for the bulb.

Vroom · 08-31-2018, 02:55 AM

Quote:

Originally Posted by 2013ZL1FUN

I believe those are torx head screws? You can really get your hand up there? By the way I agree with the who needs mods thing!

yeah, you can get your hand in there. Just turn the wheel all the way one direction or the other and its easy. I replaced my daytime and fog lights without any problem.

2013ZL1FUN · 09-05-2018, 08:27 PM

I replaced the driving bulb today, with little trouble. Just strange having to pry the well liner and pushing it open. Thanks to everyone for your help.

08-23-2018, 11:49 PM	#1
2013ZL1FUN Drives: 2013 ZL1 Convertible A6 BRM Join Date: Feb 2015 Location: Dayton Ohio Area Posts: 499	How Do You Change front light bulbs on a 13 ZL!? My daytime driving bulb is burned out on my passenger side. How do I get to it? __________________ 2013 ZL1 CONVERTIBLE BRM A6 OHIO

08-24-2018, 12:49 AM	#2
Vroom Drives: 2013 Camaro ZL1 Join Date: Oct 2012 Location: SF Bay Area Posts: 325	Easy to do, just unscrew the wheel well liner and you can get you hand in there. Replace all the bulbs with the plasma ones. They look nicer. Search for your options. __________________ 2013 Victory Red ZL1 - 210K+ miles. Mods: Who needs mods...its a freaking ZL1 - Last car: 2006 GTO

08-27-2018, 07:19 AM	#3
2013ZL1FUN Drives: 2013 ZL1 Convertible A6 BRM Join Date: Feb 2015 Location: Dayton Ohio Area Posts: 499	I believe those are torx head screws? You can really get your hand up there? By the way I agree with the who needs mods thing! __________________ 2013 ZL1 CONVERTIBLE BRM A6 OHIO

08-30-2018, 05:22 PM	#4
evonschu Drives: Camaro ZL1 Join Date: Oct 2012 Location: Hillsboro, OR. Posts: 166 View My Garage	I stuck a roll of masking tape in between the liner and the fender after getting the screws off to hold it open while you dig in there for the bulb. __________________ 2013 Camaro ZL1 M6: Rotofab CAI, JDP ZL-R Rough Idle Cam, Upgraded Valve Springs and Pushrods, Ron Davis Heat Exchanger, Alky Methanol Injection, Rx Catch Can, 87mm VMAX Ported TB, Summit Performance Spark Plug Wires, 10" Lower Pulley, Kooks 1 7/8" Headers with Magnaflow Cats, ID850 Injectors, Johnson 2110R lifters, EBC Slotted Rotors+Hawk Pads, Rotofab SC Coolant Reservoir, 160* Thermostat, Custom Mild to Wild switch, Tune, 1st to 4th bypass. 685 RWHP / 640 RWTQ.

09-05-2018, 08:27 PM	#6
2013ZL1FUN Drives: 2013 ZL1 Convertible A6 BRM Join Date: Feb 2015 Location: Dayton Ohio Area Posts: 499	I replaced the driving bulb today, with little trouble. Just strange having to pry the well liner and pushing it open. Thanks to everyone for your help. __________________ 2013 ZL1 CONVERTIBLE BRM A6 OHIO