60lbs injectors fs - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

iisme13 · 03-10-2013, 01:55 PM

I have these 60lbs injectors forsell. Thought I needed these when I did my motor but dont. I paid 300 off ls1tech
250shipped

These are ev1 connectors but they come with plug and play harness. So these will work with our cars

Specifications:
Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: Bosch EV1
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Spray Pattern: 30 Degree Spray Cone
Factory fitted with Viton upper and lower o-rings
48mm end to end

syclone1990 · 07-14-2014, 03:07 PM

Do u still have them?

03-10-2013, 01:55 PM	#1
iisme13 Drives: Pontiac G8 GT Join Date: Dec 2010 Location: DFW Posts: 79	60lbs injectors fs I have these 60lbs injectors forsell. Thought I needed these when I did my motor but dont. I paid 300 off ls1tech 250shipped These are ev1 connectors but they come with plug and play harness. So these will work with our cars Specifications: Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required) Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min Gain: 0.11ms/mg Offset: 0.055ms Turn on time @ 14VDC: 1.14ms Turn off time: 0.85ms @ 600KPa Connector: Bosch EV1 Series: DEKA 4 ( DEKA IV ) Orifice Type: Multi-orifice Spray Pattern: 30 Degree Spray Cone Factory fitted with Viton upper and lower o-rings 48mm end to end Attached Images

07-14-2014, 03:07 PM	#2
syclone1990 Drives: 2012 zl1 Join Date: Jul 2014 Location: wi Posts: 7	Do u still have them?